Aggiornato driver rainsensorqty alla versione 0.2.5c

- Update rainsensorqty driver to version 0.2.5b

CHANGELOG.md

@@ -1,3 +1,23 @@
+# 0.6.2 - 24/04/2021
+- Update rainsensorqty driver to version 0.2.5c
+
+# 0.6.1 - 06/09/2020
+- Add support for send log to piGardenWeb
+
+# 0.6.0 - 16/05/2020
+- Add support for enable all cron fron api
+- Update rainsensorqty driver to version 0.2.5b
+
+# 0.5.14 - 24/09/2019
+- Updated rainsensorqty driver to version 0.2.3 
+- Added api and command for manage piGardenSched scheduling
+
+# 0.5.13 - 12/08/2019
+- Added driver rainsensorqty for menage rainfall detection based on quantity
+
+# 0.5.12.1 - 23/06/2019
+- Added zip log drver file when exceeding the size limit
+
 # 0.5.12 - 13/11/2018
 - Fixed a bug that prevented the publication of the mqtt topic for each event
 - Fixed a bug on openweathermap driver which in some cases causes a malformation of the json status and prevented communication with piGardenWeb 

README.md

@@ -41,8 +41,8 @@ sudo make install
 
 ``` bash
 cd
-git clone git://git.drogon.net/wiringPi
-cd wiringPi
+git clone https://github.com/WiringPi/WiringPi.git
+cd WiringPi
 git pull origin 
 ./build
 ```

conf/piGarden.conf.example

@@ -2,6 +2,14 @@
 LOG_FILE="/home/pi/piGarden/log/piGarden.log"
 LOG_FILE_MAX_SIZE=1048576 # 1MB
 
+#
+# Enable send log to piGardenWeb
+#
+
+#LOG_URL="http://url_of_your_pigardenweb/api/log"
+#LOG_API_TOKEN="token_of_pigardenweb_user"
+#LOG_CURL_PARAM="--data-urlencode -k"
+
 # Log file for driver output
 LOG_OUTPUT_DRV_FILE="/tmp/piGarden.drv.log"
 
@@ -57,6 +65,9 @@ STAT="/usr/bin/stat"
 # # Installare con apt install mosquitto-clients
 MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
 
+# Percorso di piGardenSched, se non definito non verranno gestire le schedulazioni di piGardenSched tramite api
+#PIGARDENSCHED_PATH="/home/pi/piGardenSched/piGardenSched.sh"
+
 
 # Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
 # se impostato a 0 il sistema gestirà elettrovalvole bistabili

conf/piGarden.conf.rainsensorqty.example

@@ -0,0 +1,174 @@
+# Log file
+LOG_FILE="/home/pi/piGarden/log/piGarden.log"
+LOG_FILE_MAX_SIZE=1048576 # 1MB
+
+#
+# Enable send log to piGardenWeb
+#
+
+#LOG_URL="http://url_of_your_pigardenweb/api/log"
+#LOG_API_TOKEN="token_of_pigardenweb_user"
+#LOG_CURL_PARAM="--data-urlencode -k"
+
+# Log file for driver output
+LOG_OUTPUT_DRV_FILE="/tmp/piGarden.drv.log"
+
+# Status directory
+STATUS_DIR="/home/pi/piGarden/state"
+
+# Event directory
+EVENT_DIR="/home/pi/piGarden/events"
+
+# Posizione gpio
+GPIO="/usr/local/bin/gpio"
+
+# Posizione js
+JQ="/usr/local/bin/jq"
+
+# Percorso curl
+CURL="/usr/bin/curl"
+
+# Percorso wc
+WC="/usr/bin/wc"
+
+# Percorso gzip
+GZIP="/bin/gzip"
+
+# Percorso mv
+MV="/bin/mv"
+
+# Percorso di tr
+TR="/usr/bin/tr"
+
+# Percorso di cut
+CUT="/usr/bin/cut"
+
+# Percorso tcpserver
+TCPSERVER="/usr/bin/tcpserver"
+
+# Percorso cron
+CRONTAB="/usr/bin/crontab"
+
+# Percorso grep
+GREP="/bin/grep"
+
+# Percorsp sed
+SED="/bin/sed"
+
+# Percorso readlink
+READLINK="/bin/readlink"
+
+# Percorso stat
+STAT="/usr/bin/stat"
+
+# Percorso mosquito_pub
+# # Installare con apt install mosquitto-clients
+MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
+
+# Percorso di piGardenSched, se non definito non verranno gestire le schedulazioni di piGardenSched tramite api
+#PIGARDENSCHED_PATH="/home/pi/piGardenSched/piGardenSched.sh"
+
+
+# Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
+# se impostato a 0 il sistema gestirà elettrovalvole bistabili
+EV_MONOSTABLE=0
+
+# Id gpio usati per simulare il doppio deviatore con cui eseguire l'alimentazione alle elettrovalvole
+SUPPLY_GPIO_1=2		# Physical 3 - wPi 8
+SUPPLY_GPIO_2=3		# Physical 5 - wPi 9
+
+# Stato dei due gpio per impartire l'alimentazione positiva alle elettrovalvole (aperta)
+SUPPLY_GPIO_POS=0
+
+# Stato dei due gpio per impartire l'alimentazione negativa alle elettrovalvole (chiusa)
+SUPPLY_GPIO_NEG=1
+
+# Stato di ingresso da assegnare al gpio per chiudere il rele
+RELE_GPIO_CLOSE=0
+
+# Stato di ingresso da assegnare al gpio per aprire il rele
+RELE_GPIO_OPEN=1
+
+# Id del gpio usato per collegare il sensore di rilevamento pioggia
+# attraverso il driver rainsensorqty
+RAIN_GPIO="drv:rainsensorqty:25"        # Physical 22 - wPi 6
+
+# Valore in ingresso sul gpio definito in RAIN_GPIO che indica lo stato di pioggia
+# variabile usata anche da drv:rainsensorqty, se e' a 1, significa che il reed contact e' collegato ad un circuito pull-down, vuol dire che attende l'impulso a 1 per contare le vaschette, normalmente e' a 0.
+# se e' a 0, significa che il reed contact e' collegato ad un circuito pull-up, vuol dire che attende l'impulso a 0 per contare le vaschette, normalmente e' a 0.
+RAIN_GPIO_STATE=0
+
+RAINSENSORQTY_LOOPSFORSETRAINING=16 # dopo 16 impulsi, 16 vaschette riempite si considera pioggia
+RAINSENSORQTY_SECSBETWEENRAINEVENT=10800 # =3h, significa che dopo 3 ore si resetta il numero di vaschette riempire e solo dopo un nuovo ciclo di riempimento si considera una nuova pioggia
+
+RAINSENSORQTY_MMEACH=0.33 # see RAINSENSORQTY driver readme for details
+
+
+
+# Numero totale di elettrovalvole
+EV_TOTAL=6
+
+# Definizione delle elettrovalvole
+EV1_ALIAS="1" #
+EV1_GPIO=17   #		Physical 11 - wPi 0
+#EV1_NORAIN=1 # 	Non interrompe l'irrigazione di questa zona in caso di pioggia
+#EV1_MONOSTABLE=1 #	L'elettrovalvola è monostabile
+
+EV2_ALIAS="2" #
+EV2_GPIO=27   #		Physical 13 - wPi 2
+
+EV3_ALIAS="3" #
+EV3_GPIO=22   #		Physical 15 - wPi 3
+
+EV4_ALIAS="4" #
+EV4_GPIO=18   #		Physical 12 - wPi 1
+
+EV5_ALIAS="5" #
+EV5_GPIO=23   #		Physical 16 - wPi 4
+
+EV6_ALIAS="6" #
+EV6_GPIO=24   #		Physical 18 - wPi 5
+
+
+# Definisci il servizio online da utilizzare per il controllo delle condizioni meteo, puoi scegliere openweathermap oppure wunderground.
+# Se non vuoi configurare nessun servizio imposta il vale "none"
+WEATHER_SERVICE="openweathermap"
+#WEATHER_SERVICE="none" # Nessun servizio configurato
+
+# Parametri di openweathermap, definisce l'api key e il luogo per recuperare lo stato meteo online
+OPENWEATHERMAP_KEY=""
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it" # https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"	# Time zone
+
+# Parametri di wunderground, definisce l'api key e il luogo per recuperare lo stato meteo online
+WUNDERGROUND_KEY=""
+WUNDERGROUND_LOCATION="IT/Pieve%20a%20Nievole"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+
+
+# Blocca l'irrigazione se l'ultima pioggia rilevata online è avvenuta nell'ultima quantità di tempo inserita.
+# Il tempo è espresso in secondi. Quindi inserendo 86400, se nelle ultime 24 ore ha piovuto viene bloccata l'irrigazione. Inserendo il valore zero non viene eseguito nessun controllo.
+NOT_IRRIGATE_IF_RAIN_ONLINE=86400
+
+# Il parametro è simile a quello precedente, il controllo però anziché essere fatto attingendo a wunderground, viene eseguito direttamente sul sensore se installato. Inserendo il valore zero non viene eseguito nessun controllo.
+NOT_IRRIGATE_IF_RAIN_SENSOR=86400
+
+# Indirizzo ip e porta di ascolto del socket server
+TCPSERVER_IP="127.0.0.1"
+TCPSERVER_PORT="8084"
+
+# Utente e password che i clients devono utilizzare per stabilire una connessione tramite socket server
+TCPSERVER_USER=""
+TCPSERVER_PWD=""
+
+# Con impostato il valore 1 non invia l'identificativi per statistiche di utilizzo
+NO_SEND_IDENTIFIER=0
+
+# Parametri connessione al broker mqtt
+MQTT_ENABLE=0	# set 1 to enable
+MQTT_HOST=you_host_mqtt
+MQTT_PORT=1883
+MQTT_USER=your_user_mqtt
+MQTT_PWD=yout_password_mqtt
+MQTT_TOPIC="pigarden/result"
+MQTT_CLIENT_ID=piGarden
+

conf/piGarden.conf.remote.example

@@ -2,6 +2,14 @@
 LOG_FILE="/home/pi/piGarden/log/piGarden.log"
 LOG_FILE_MAX_SIZE=1048576 # 1MB
 
+#
+# Enable send log to piGardenWeb
+#
+
+#LOG_URL="http://url_of_your_pigardenweb/api/log"
+#LOG_API_TOKEN="token_of_pigardenweb_user"
+#LOG_CURL_PARAM="--data-urlencode -k"
+
 # Log file for driver output
 #LOG_OUTPUT_DRV_FILE="/tmp/piGarden.drv.log"
 
@@ -57,6 +65,9 @@ STAT="/usr/bin/stat"
 # Installare con apt install mosquitto-clients
 MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
 
+# Percorso di piGardenSched, se non definito non verranno gestire le schedulazioni di piGardenSched tramite api
+#PIGARDENSCHED_PATH="/home/pi/piGardenSched/piGardenSched.sh"
+
 
 # Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
 # se impostato a 0 il sistema gestirà elettrovalvole bisstabili

conf/piGarden.conf.sonoff_tasmota_http.example

@@ -2,6 +2,14 @@
 LOG_FILE="/home/pi/piGarden/log/piGarden.log"
 LOG_FILE_MAX_SIZE=1048576 # 1MB
 
+#
+# Enable send log to piGardenWeb
+#
+
+#LOG_URL="http://url_of_your_pigardenweb/api/log"
+#LOG_API_TOKEN="token_of_pigardenweb_user"
+#LOG_CURL_PARAM="--data-urlencode -k"
+
 # Log file for driver output
 #LOG_OUTPUT_DRV_FILE="/tmp/piGarden.drv.log"
 
@@ -57,6 +65,9 @@ STAT="/usr/bin/stat"
 # # Installare con apt install mosquitto-clients
 MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
 
+# Percorso di piGardenSched, se non definito non verranno gestire le schedulazioni di piGardenSched tramite api
+#PIGARDENSCHED_PATH="/home/pi/piGardenSched/piGardenSched.sh"
+
 
 # Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
 # se impostato a 0 il sistema gestirà elettrovalvole bisstabili

conf/piGarden.conf.spb16ch.example

@@ -2,6 +2,14 @@
 LOG_FILE="/home/pi/piGarden/log/piGarden.log"
 LOG_FILE_MAX_SIZE=1048576 # 1MB
 
+#
+# Enable send log to piGardenWeb
+#
+
+#LOG_URL="http://url_of_your_pigardenweb/api/log"
+#LOG_API_TOKEN="token_of_pigardenweb_user"
+#LOG_CURL_PARAM="--data-urlencode -k"
+
 # Log file for driver output
 #LOG_OUTPUT_DRV_FILE="/tmp/piGarden.drv.log"
 
@@ -57,6 +65,9 @@ STAT="/usr/bin/stat"
 # Installare con apt install mosquitto-clients
 MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
 
+# Percorso di piGardenSched, se non definito non verranno gestire le schedulazioni di piGardenSched tramite api
+#PIGARDENSCHED_PATH="/home/pi/piGardenSched/piGardenSched.sh"
+
 
 # Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
 # se impostato a 0 il sistema gestirà elettrovalvole bisstabili

drv/rainsensorqty/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+.set_var
+# Except this file
+!.gitignore

drv/rainsensorqty/README.md

@@ -0,0 +1,124 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file README.md
+# Version: 0.2.5
+# Data: 07/Apr/2020
+
+
+FILE DI CONFIGURAZIONE /etc/piGarden.conf:
+-----------------------------------------
+NOTA: vedere nella directory conf_example il file esempio piu' aggiornato!
+
+per attivare il driver e' necessario inserire la seguente variabile nel file di configurazion
+	RAIN_GPIO="drv:rainsensorqty:25"        # Physical 22 - wPi 6
+
+la variabile seguente e' impiegata anche da drv_rainsensorqty per rilevare la chiusura del contatto magnetico che, in un circuito pull-up, e' lo stato 1.
+	# Valore in ingresso sul gpio definito in RAIN_GPIO che indica lo stato di pioggia
+	RAIN_GPIO_STATE=1
+le seguenti variabili controllano il driver come descritto:
+	RAINSENSORQTY_LOOPSFORSETRAINING=16 # dopo 16 impulsi, 16 vaschette riempite si considera pioggia
+	RAINSENSORQTY_SECSBETWEENRAINEVENT=10800 # =3h, significa che dopo 3 si resetta il numero di vaschette da riempire e solo dopo il riempimento del nuovo numero di vaschette si considera una nuova pioggia
+infine la variabile seguente e' la quantita' di acqua espressa in mm di precipitazioni:
+	RAINSENSORQTY_MMEACH=0.33 # see RAINSENSORQTY driver readme for details
+
+CALIBRAZIONE SENSORE PIOGGIA
+----------------------------
+secondo il seguente processo da me effettuato sul mio misuratore di pioggia:
+Ho erogato 18 ml di acqua nel rain gauge che hanno prodotto 10 impulsi; pertanto il riempimento di 1.8 ml ha causato un impulso, 1 ml = 1000 mmc (mm cubici),
+1.8 ml sono pari a 1800 mmc
+la superficie della vaschetta in mmq e' pari a 110 mm x 55 mm = 5500 mmq
+volume / superficie mi da' l'altezza, quindi 1800 mmc / 5500 mmq = 0.32727273 mm
+se fossero stati 1.7 ml di acqua per ogni impulso/vaschetta riempita, la variabile sarebbe stata impostata a 0.30909091 mm
+
+COMANDI SPECIALI
+----------------
+nella sottodirectory command sono presenti:
+commands/rainsensorqty_CHECK.sh
+	chiama la funzione di verifica pioggia, la medesima chiamata da check_rain_sensor
+commands/rainsensorqty_HISTORY.sh
+	visualizza lo storico della pioggia consultando il file $RAINSENSORQTY_HISTORY
+	puo' essere lanciato con l''opzione -force per ricostruire il file $RAINSENSORQTY_HISTORY dal $RAINSENSORQTY_HISTORYRAW
+	e con un argomento X, che permette di evidenziare solo gli ultimi X eventi
+commands/rainsensorqty_HISTORYRAW.sh
+	visualizza lo storico della pioggia consultando il file $RAINSENSORQTY_HISTORYRAW
+	puo' essere lanciato senza argomenti per processare l'intero file, chiede conferma visto che i tempi sono potenzialmente lunghi
+	con un argomento X, che permette di evidenziare solo gli ultimi X eventi
+commands/rainsensorqty_INIT.sh
+	inizializza il driver eseguendo lo script di monitoring - normalmente tale processo avviene da piGarden.sh
+	utile quando si vuole testare dei cambiamenti o se necessario riavviare dopo il kill del comando successivo
+commands/rainsensorqty_KILL.sh
+	killa i processi di monitoring ed eventuali figli
+commands/rainsensorqty_RAINNOW.sh
+	simula una pioggia registrandola in $RAINSENSORQTY_LASTRAIN $RAINSENSORQTY_HISTORY $RAINSENSORQTY_HISTORYRAW
+	puo' essere lanciato in 3 modi:
+	senza argomenti: genera una pioggia per un numero di loop pari al valore della variabile RAINSENSORQTY_LOOPSFORSETRAINING, quindi una pioggia completa
+	con un argomento: che indica quanti loop
+	con due argomenti: quanti loop e quanti secondi tra uno e l'altro
+commands/rainsensorqty_REMOVELASTRAIN.sh
+	rimuove dai file $RAINSENSORQTY_LASTRAIN $RAINSENSORQTY_HISTORY $RAINSENSORQTY_HISTORYRAW l'ultima pioggia registrata
+commands/rainsensorqty_RESET.sh
+	invia il SIGUSR1 al processo di monitor per resettare i cicli. Viene visualizzato il reset solo dopo il successivo PULSE, questo perche' non e' possibile per lo script ricevere il trap in quanto il processo $GPIO e' attivo in attesa del PULSE
+
+questi i timestamps alla data del file:
+-rwxr-xr-x 1 pi pi 1044 Sep 24 18:26 rainsensorqty_CHECK.sh
+-rwxr-xr-x 1 pi pi 1139 Nov 28 00:17 rainsensorqty_HISTORYRAW.sh
+-rwxr-xr-x 1 pi pi 1462 Nov 19 00:19 rainsensorqty_HISTORY.sh
+-rwxr-xr-x 1 pi pi  596 Sep 24 18:26 rainsensorqty_INIT.sh
+-rwxr-xr-x 1 pi pi 1300 Sep 24 18:26 rainsensorqty_KILL.sh
+-rwxr-xr-x 1 pi pi 1111 Nov 27 00:05 rainsensorqty_RAINNOW.sh
+-rwxr-xr-x 1 pi pi 1252 Nov 22 00:18 rainsensorqty_REMOVELASTRAIN.sh
+-rwxr-xr-x 1 pi pi  897 Sep 24 18:26 rainsensorqty_RESET.sh
+
+ULTERIORI VARIABILI in config.include.sh
+----------------------------------------
+esistono ulteriori variabili che potrebbe essere necessario variare
+
+RAINSENSOR_DEBOUNCE=0.3 # 0.3 seconds for manage debounce of reed contact
+	serve per ritardare la lettura di un secondo impulso falso causato dal rimbalzo del contatto magnetico
+
+RAINSENSORQTY_verbose="yes"
+	aumenta il livello di verbosita' nei file di log
+	
+RAINSENSORQTY_LASTRAIN="$STATUS_DIR/rainsensorqty_lastrain"
+	memorizza l'ultima pioggia
+RAINSENSORQTY_HISTORY="$STATUS_DIR/rainsensorqty_history"
+	memorizza tutte le piogge permettendo di visualizzare lo storico (commands/rainsensorqty_HISTORY.sh)
+RAINSENSORQTY_HISTORYRAW="$STATUS_DIR/rainsensorqty_history.raw"
+	memorizza in formato grezzo (raw) tutti gli impulsi registrati  (formato: "secondi:impulsi" ) - consultabile il contenuto con commands/rainsensorqty_HISTORYRAW.sh
+
+RAINSENSORQTY_MONITORLOG="$DIR_SCRIPT/log/rainsensorqty_monitor.log"
+	log dello script di monitoring, popolato solo se RAINSENSORQTY_verbose="yes"
+
+RAINSENSORQTY_MONPID="$TMPDIR/rainsensorqty_monitor.pid"
+	file che viene popolato con il pid dello script di monitoring
+
+RAINSENSORQTY_DIR="$DIR_SCRIPT/drv/rainsensorqty"
+	home directory del driver
+
+monitor_sh="$RAINSENSORQTY_DIR/drv_rainsensorqty_monitor.sh"
+	script di monitoring
+	lo script eredita le variabili di ambiente da $RAINSENSORQTY_VAR ($TMPDIR/.rainsensorqty_var)
+
+NOTA: $TMPDIR e' /tmp e lo script visualizza un warning se non e' un tmpfs
+
+# internal gpio resistor, 3 values: pull-up, pull-down, none
+# pull-up/down if rain gauge is connected directly to raspberry
+# none if connected through an optocoupler circuit
+GPIO_RESISTOR="none" #pull-up|pull-down|none
+	enable pull-up or pull-down resistor: https://raspberry-projects.com/pi/pi-hardware/raspberry-pi-model-b-plus/model-b-plus-io-pins
+	Pull-up is 50K min - 65K max.
+	Pull-down is 50K min - 60K max. 
+
+#rising means waiting for 1 status (from 0)
+#falling means waiting for 0 status (from 1)
+#RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+#RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+(( RAIN_GPIO_STATE == 1 )) && RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+(( RAIN_GPIO_STATE == 0 )) && RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+
+	lo script di monitoring ascolta il cambiamento di stato da quello di riposo allo stato di impulso (chiusura del contatto reed).
+	dipendentemente dal circuto implementato, se lo stato di riposo e' 0, lo script attende la variazione verso 1 (rising)
+	se lo stato di riposo e' 1, lo script attende la variazione verso 0 (falling)
+	la variabile RAINSENSORQTY_PULSE viene impostata secondo il valore di RAIN_GPIO_STATE presente in /etc/piGarden.conf
+	cioe' il valore che ci si aspetta per registrare il riempimento della vaschetta dello stato di pioggia

drv/rainsensorqty/commands/rainsensorqty_CHECK.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_CHECK.sh"
+# test script for checking rain status using drv_rainsensorqty_rain_sensor_get function
+# Version: 0.2.0
+# Data: 11/Aug/2019
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+LOG_OUTPUT_DRV_FILE="$DIR_SCRIPT/log/$LOG_OUTPUT_DRV_FILE"
+
+. $CONFIG_ETC
+
+. ./common.include.sh
+. ./config.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+# restituisce 0 se piove, e nell'output di testo il valore di "$RAIN_GPIO_STATE"
+# restituisce 99 se non piove, output "norain"
+# esce con 1 se non c'e' il monitoring, output "ERROR"
+
+drv_rainsensorqty_rain_sensor_get
+case $? in
+	0)  echo "NORMAL: it's raining" ;;
+	99) echo "NORMAL: it's not raining" ;;
+	1)  echo "ERROR: monitor process $DIR_SCRIPT/drv/rainsensorqty/drv_rainsensorqty_monitor.sh is not running" ;;
+esac
+

drv/rainsensorqty/commands/rainsensorqty_HISTORY.sh

@@ -0,0 +1,59 @@
+#!/bin/bash
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_CHECK.sh"
+# test script for checking rain status using drv_rainsensorqty_rain_sensor_get function
+# Version: 0.2.5
+# Data: 08/Jan/2020
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+LOG_OUTPUT_DRV_FILE="$DIR_SCRIPT/log/$LOG_OUTPUT_DRV_FILE"
+
+. $CONFIG_ETC
+
+. ./common.include.sh
+. ./config.include.sh 
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+if [[ $1 = "-force" ]] ; then
+	if [[ -s $RAINSENSORQTY_HISTORY ]] ; then
+		echo backup $RAINSENSORQTY_HISTORY to ${RAINSENSORQTY_HISTORY}.old$$
+		cp $RAINSENSORQTY_HISTORY ${RAINSENSORQTY_HISTORY}.old$$
+	fi
+
+	echo "generate all rain events to $RAINSENSORQTY_HISTORY"
+	if ! rainevents > ${RAINSENSORQTY_HISTORY} ; then
+		echo "WARNING: rainevents function had error"
+	fi
+	shift
+fi
+
+if ! rain_history tmp ; then # update rain history with last rain if not
+	echo "WARNING: rain_history function had error"
+fi
+
+cmd="cat"
+if [[ $# > 0 ]] ; then
+	if (( $1 >= 1 )) ; then
+		echo "processing last $1 lines of $RAINSENSORQTY_HISTORYRAW file"
+		cmd="tail -$1"
+	else
+		echo "argument not recognized - exit"
+		exit 1
+	fi
+fi
+echo -e "\n\n"
+
+if [[ -s $RAINSENSORQTY_HISTORY ]] ; then
+	echo "RAIN HISTORY"
+	cat $RAINSENSORQTY_HISTORY $RAINSENSORQTY_HISTORYTMP | $cmd | rain_when_amount
+else
+	echo "WARNING: no \$RAINSENSORQTY_HISTORY file"
+fi

drv/rainsensorqty/commands/rainsensorqty_HISTORYRAW.sh

@@ -0,0 +1,50 @@
+#!/bin/bash
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_CHECK.sh"
+# test script for checking rain status using drv_rainsensorqty_rain_sensor_get function
+# Version: 0.2.5
+# Data: 07/Apr/2020
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+LOG_OUTPUT_DRV_FILE="$DIR_SCRIPT/log/$LOG_OUTPUT_DRV_FILE"
+
+. $CONFIG_ETC
+
+. ./common.include.sh
+. ./config.include.sh 
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+
+if [[ $# = 0 ]] ; then
+	cmd=cat
+	echo "processing all entire  $RAINSENSORQTY_HISTORYRAW file, will go on? (y/n)"
+	read answer
+	echo $answer
+	[[ $answer = [yY] ]] || exit 1
+else
+	if (( $1 >= 1 )) ; then
+		echo "processing $1 lines of $RAINSENSORQTY_HISTORYRAW file"
+		cmd="tail -$1"
+	else
+		echo "argument not recognized - exit"
+		exit 1
+	fi
+fi
+echo -e "\n\n"
+
+$cmd $RAINSENSORQTY_HISTORYRAW | while read line
+do
+	set -- ${line//:/ }
+	secs=$1
+	counter=$2
+	echo "$(sec2date $1):$counter"
+done
+ 

drv/rainsensorqty/commands/rainsensorqty_INIT.sh

@@ -0,0 +1,25 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_INIT.sh"
+# test script for initialize driver and executing monitor process
+# Version: 0.2.0
+# Data: 11/Aug/2019
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+
+. $CONFIG_ETC
+
+. ./config.include.sh
+. ./common.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+drv_rainsensorqty_rain_sensor_init
+
+drv_rainsensorqty_init

drv/rainsensorqty/commands/rainsensorqty_KILL.sh

@@ -0,0 +1,52 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_KILL.sh"
+# script for killing monitor process(es)
+# Version: 0.2.0a
+# Data: 29/Aug/2019
+
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+
+. $CONFIG_ETC
+
+. ./config.include.sh
+. ./common.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+# check if rain monitor process is running...
+if [[ -f "$RAINSENSORQTY_MONPID" ]] ; then
+        pid="$( < "$RAINSENSORQTY_MONPID" )"
+        if ps -fp $pid >/dev/null ; then
+		echo "process $pid pid and its child(ren)"
+		children_pid="$(ps -ef| awk "\$3==$pid {print \$2}")"
+		ps -fp $pid
+		ps -fp $children_pid | tail +2
+		echo -e "\nsending TERM signal to $pid and its child(ren)"
+		echo kill $children_pid
+		echo kill $pid
+		kill $children_pid
+		kill $pid
+		echo -e "\nchecking $pid pid and its child(ren) are still alive"
+		for process in $pid $children_pid
+		do
+        		if ps -fp $process >/dev/null ; then
+				echo "$process is still alive"
+			else
+				echo "$process is dead"
+			fi
+		done
+	else
+		echo "no RAIN process alive"
+        fi
+else
+	echo "no RAIN process alive"
+fi
+

drv/rainsensorqty/commands/rainsensorqty_RAINNOW.sh

@@ -0,0 +1,67 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_RAINNOW.sh"
+# test script for simulate rain ... now!
+# Version: 0.2.5
+# Data: 07/Apr/2020
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+. $CONFIG_ETC
+
+. ./config.include.sh
+. ./common.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+wait=0
+timestart=$( date +%s)
+if [[ $# -ne 0 ]] ; then
+	if [[ $# = 1 ]] ; then 
+		howmany=$1
+		echo "one argument passed: rain event for $howmany loops"
+		(( time = timestart - howmany ))
+	elif [[ $# = 2 ]] ; then 
+		howmany=$1
+		wait=$2
+		echo "two arguments passed: rain event for $howmany loops every $wait seconds"
+		(( time = timestart ))
+	else
+		echo "too many arguments... exit"
+		exit 1
+	fi
+else
+	howmany=$RAINSENSORQTY_LOOPSFORSETRAINING
+	(( time = timestart - $RAINSENSORQTY_LOOPSFORSETRAINING ))
+fi
+
+
+echo "RAIN now! (for $howmany loops)"
+for (( c=1; c<=$howmany; c++ )) 
+do
+	if (( wait > 0 )) ; then	
+		time=$( date +%s)
+	else
+		(( time+= 1 ))
+	fi
+	linetoadd="$time:$c"
+	echo $linetoadd >> $RAINSENSORQTY_HISTORYRAW
+	sleep $wait
+	echo -e ".\c"
+done
+echo
+
+if ! rain_history ; then # update rain history with last rain if not
+	echo "WARNING: rain_history function had error"
+fi
+
+echo $linetoadd > ${RAINSENSORQTY_LASTRAIN}
+echo "file ${RAINSENSORQTY_LASTRAIN} updated."
+
+echo "last 2 rain events:"
+tail -2 $RAINSENSORQTY_HISTORY | rain_when_amount

drv/rainsensorqty/commands/rainsensorqty_REMOVELASTRAIN.sh

@@ -0,0 +1,44 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "test_rainsensorqty_CHECK.sh"
+# test script for checking rain status using drv_rainsensorqty_rain_sensor_get function
+# Version: 0.2.5
+# Data: 07/Apr/2020
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+
+LOG_OUTPUT_DRV_FILE="$DIR_SCRIPT/log/$LOG_OUTPUT_DRV_FILE"
+
+. $CONFIG_ETC
+
+. ./common.include.sh
+. ./config.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+# two variables for store rain data
+# RAINSENSORQTY_LASTRAIN
+# RAINSENSORQTY_HISTORY
+
+echo "RAIN HISTORY - last two events"
+tail -2 $RAINSENSORQTY_HISTORY 
+tail -2 $RAINSENSORQTY_HISTORY | rain_when_amount
+
+echo "...removing last event"
+removelastrain
+echo "...rebuilding ${RAINSENSORQTY_HISTORY} from ${RAINSENSORQTY_HISTORYRAW}"
+if ! rainevents > ${RAINSENSORQTY_HISTORY} ; then
+	echo "WARNING: rainevents function had error"
+fi
+tail -1 ${RAINSENSORQTY_HISTORYRAW} > ${RAINSENSORQTY_LASTRAIN}
+
+echo -e "\nnew RAIN HISTORY - last two events"
+tail -2 $RAINSENSORQTY_HISTORY 
+tail -2 $RAINSENSORQTY_HISTORY | rain_when_amount
+

drv/rainsensorqty/commands/rainsensorqty_RESET.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_RESET.sh"
+# script for reset counter in monitor script
+# Version: 0.2.0a
+# Data: 29/Aug/2019
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+
+. $CONFIG_ETC
+
+. ./config.include.sh
+. ./common.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+# check if rain monitor process is running...
+if [[ -f "$RAINSENSORQTY_MONPID" ]] ; then
+        pid="$( < "$RAINSENSORQTY_MONPID" )"
+        if ps -fp $pid >/dev/null ; then
+		echo "sending SIGUSR1 to $pid"
+		kill -SIGUSR1 $pid
+		echo -e "sent SIGUSR1 - reset will be shown after next cycle"
+	else
+		echo "no RAIN process alive"
+        fi
+else
+	echo "no RAIN process alive"
+fi

drv/rainsensorqty/commands/test_pulse

@@ -0,0 +1 @@
+echo 1 > /tmp/tick ; sleep 0.9 ; echo 0 > /tmp/tick

drv/rainsensorqty/common.include.sh

@@ -0,0 +1,203 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "common.include.sh"
+# common functions used by driver
+# Version: 0.2.5
+# Data: 08/Jan/2020
+
+
+#note:
+#RAINSENSORQTY_MONPID="$TMPDIR/rainsensorqty_monitor.pid"
+#
+
+sec2date()
+{
+        date --date="@$1"
+}
+
+d() # short date & time
+{
+date '+%X-%x'
+}
+
+
+drv_rainsensorqty_writelog()
+{
+	#2 variables - $1 function, $2 message
+	if [[ $2 =~ ERROR || $2 =~ WARNING || $2 =~ RAIN || $RAINSENSORQTY_verbose = yes ]] ; then
+	        echo -e "$1 - `d`\t\t$2" >> "$LOG_OUTPUT_DRV_FILE"
+#        	if [[ $($WC -c <"$LOG_OUTPUT_DRV_FILE") > $LOG_FILE_MAX_SIZE )) ; then
+#                	$GZIP "$LOG_OUTPUT_DRV_FILE"
+#                	$MV "${LOG_OUTPUT_DRV_FILE}.gz" "${LOG_OUTPUT_DRV_FILE}.$(date +%Y%m%d%H%M).gz"
+#        	fi
+	fi
+}
+
+
+drv_rainsensorqty_check()
+{
+	local f="drv_rainsensorqty_check"
+
+	if [[ -f "$RAINSENSORQTY_MONPID" ]] ; then
+		local pid=$( < "$RAINSENSORQTY_MONPID" )
+		drv_rainsensorqty_writelog $f "NORMAL: checking if $pid pid is running"
+        	if ps -fp $pid >/dev/null ; then
+			drv_rainsensorqty_writelog $f "NORMAL: $pid pid is running"
+			return 0
+        	else
+			drv_rainsensorqty_writelog $f "ERROR: $pid pid monitor process NOT running - $RAINSENSORQTY_MONPID file contains $pid"
+			return 1
+        	fi
+	else
+		drv_rainsensorqty_writelog $f "ERROR: no raining monitor process file \$RAINSENSORQTY_MONPID"
+        	return 1
+	fi
+}
+
+en_echo() # enhanched echo - check verbose variable
+{
+	[[ $RAINSENSORQTY_verbose = yes ]] && echo "$(d) $*"
+}
+
+check_incomplete_loop()
+{
+	[[ ! -f $RAINSENSORQTY_HISTORYRAW ]] && return 1
+	[[ ! -f $RAINSENSORQTY_HISTORY ]] && touch $RAINSENSORQTY_HISTORY
+	> $RAINSENSORQTY_HISTORYTMP
+
+	if lastrainevent=$( rainevents 1 ) ; then
+       		: # done ok
+	else
+        	echo "WARNING: rainevents function had errors"
+		return 1
+	fi
+
+        set -- ${lastrainevent//:/ }
+	local started=$1
+	local before=$2
+	local counter=$3
+
+	wrongevent=$(awk -F ":" '$1=="'$started'" && $2!="'$before'" {print $0}' $RAINSENSORQTY_HISTORY) 
+	if [[ -n $wrongevent ]] ; then
+		echo "ERROR: wrong last rain event found: $wrongevent , right one should be: $lastrainevent"
+		return 2
+	fi
+
+	if grep -q ^${lastrainevent}$ $RAINSENSORQTY_HISTORY ; then
+		: # already present
+		return 0
+	else
+
+		: # missing and fixed 
+		if [[ $1 == tmp ]] ; then
+			echo $lastrainevent > $RAINSENSORQTY_HISTORYTMP
+		else
+			echo $lastrainevent >> $RAINSENSORQTY_HISTORY
+		fi
+		return 1
+	fi
+}
+
+#next function is not used anymore
+rain_history()
+{
+	[[ ! -f $RAINSENSORQTY_HISTORYRAW ]] && return 1
+	[[ ! -f $RAINSENSORQTY_HISTORY ]] && touch $RAINSENSORQTY_HISTORY
+	> $RAINSENSORQTY_HISTORYTMP
+
+	if lastrainevent=$( rainevents 1 ) ; then
+       		: # done ok
+	else
+        	echo "WARNING: rainevents function had errors"
+		return 1
+	fi
+
+#old	#if grep -q ^$(<$RAINSENSORQTY_LASTRAIN)$ $RAINSENSORQTY_HISTORY ; then
+	if grep -q ^${lastrainevent}$ $RAINSENSORQTY_HISTORY ; then
+		: # already present
+		return 0
+	else
+		: # missing and fixed 
+		if [[ $1 == tmp ]] ; then
+			echo $lastrainevent > $RAINSENSORQTY_HISTORYTMP
+		else
+			echo $lastrainevent >> $RAINSENSORQTY_HISTORY
+		fi
+		return 0
+	fi
+}
+
+rain_when_amount()
+{
+# from standard input
+# format  $time:$endtime:$endsequence
+cat - | while read line
+do
+        set -- ${line//:/ }
+        start=$1
+        stop=$2
+        howmuch=$3
+        printf "RAINED for %7.2f mm between %s and %s\n" $( $JQ -n "$howmuch * $RAINSENSORQTY_MMEACH" ) "$(date --date="@$start")" "$(date --date="@$stop")"
+done
+}
+
+check_TMPDIR()
+{
+        if [[ $(df  | awk '$NF=="/tmp" {print $1}') != "tmpfs" ]] ; then
+                echo "WARNING: /tmp isn't a tmp file system"
+                echo -e "\tplease add to your /etc/fstab file:\n\ttmpfs           /tmp            tmpfs defaults,noatime,nosuid   0       0"
+        fi
+}
+
+rainevents()
+{
+	if [[ ! -f $RAINSENSORQTY_HISTORYRAW ]] ; then
+		#echo "WARNING: no \$RAINSENSORQTY_HISTORYRAW file"# cannot echo, redirected output
+		return 1
+	fi
+	case $1 in
+       		[0-9]|[0-9][0-9]) howmanyevent=$1 ;;
+#		-1) skiplast=true ;;
+		*) howmanyevent=-1 ;;
+	esac
+
+	newloop=yes
+	tac $RAINSENSORQTY_HISTORYRAW | while read line
+	do
+		set -- ${line//:/ }
+		time=$1
+		sequence=$2
+		if [[ $newloop == yes ]] ; then
+			endtime=$time
+			endsequence=$sequence
+			newloop=no
+		fi
+		if (( sequence == 1 )) ; then
+#			[[ $skiplast=true ]] && { skiplast=false ; continue ; }
+			echo $time:$endtime:$endsequence
+			newloop=yes
+			(( event +=1 ))
+		fi
+		(( howmanyevent == event )) && break
+	done | sort -k1n
+}
+
+removelastrain()
+{
+	if [[ ! -f $RAINSENSORQTY_HISTORYRAW ]] ; then
+		echo "WARNING: no \$RAINSENSORQTY_HISTORYRAW file"
+		return 1
+	fi
+
+	next=false
+	tac $RAINSENSORQTY_HISTORYRAW | while read line
+	do
+		set -- ${line//:/ }
+		time=$1
+		sequence=$2
+		[[ $next = true ]] && echo $line
+		(( sequence == 1 )) && next=true
+	done | tac > ${RAINSENSORQTY_HISTORYRAW}_$$
+	mv ${RAINSENSORQTY_HISTORYRAW}_$$ $RAINSENSORQTY_HISTORYRAW
+}

drv/rainsensorqty/conf_example/config.include.sh

@@ -0,0 +1,66 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "config.include.sh"
+# specific driver config file
+# Version: 0.2.5
+# Data: 08/Jan/2020
+
+export TMPDIR=/tmp
+
+RAINSENSOR_DEBOUNCE=0.3 # 0.3 seconds for manage debounce of reed contact
+
+RAINSENSORQTY_verbose="yes" # yes/no
+
+RAINSENSORQTY_LASTRAIN="$STATUS_DIR/rainsensorqty_lastrain"
+RAINSENSORQTY_HISTORY="$STATUS_DIR/rainsensorqty_history"
+RAINSENSORQTY_HISTORYRAW="$STATUS_DIR/rainsensorqty_history.raw"
+RAINSENSORQTY_HISTORYTMP="$TMPDIR/rainsensorqty_history.tmp"
+
+RAINSENSORQTY_MONITORLOG="$DIR_SCRIPT/log/rainsensorqty_monitor.log"
+
+RAINSENSORQTY_MONPID="$TMPDIR/rainsensorqty_monitor.pid"
+RAINSENSORQTY_STATE="$TMPDIR/rainsensorqty_state"
+RAINSENSORQTY_STATE_HIST="$TMPDIR/rainsensorqty_state.history"
+
+RAINSENSORQTY_DIR="$DIR_SCRIPT/drv/rainsensorqty"
+
+monitor_sh="$RAINSENSORQTY_DIR/drv_rainsensorqty_monitor.sh"
+
+# internal gpio resistor, 3 values: pull-up, pull-down, none
+# pull-up/down if rain gauge is connected directly to raspberry
+# none if connected through an optocoupler circuit
+GPIO_RESISTOR="pull-up" #pull-up|pull-down|none
+
+#rising means waiting for 1 status (from 0)
+#falling means waiting for 0 status (from 1)
+#RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+#RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+(( RAIN_GPIO_STATE == 1 )) && RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+(( RAIN_GPIO_STATE == 0 )) && RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+
+
+config_check()
+{
+	var2check="RAINSENSOR_DEBOUNCE RAINSENSORQTY_verbose RAINSENSORQTY_LASTRAIN RAINSENSORQTY_HISTORY RAINSENSORQTY_MONITORLOG RAINSENSORQTY_MONPID RAINSENSORQTY_DIR monitor_sh"
+	for var in $var2check
+	do
+		#${!a}
+		if [[ -z ${!var} ]] ; then
+			echo "ERROR: \$$var not set"
+			exit 1 
+		fi
+	done
+	if [[ -z $RAINSENSORQTY_PULSE ]] ; then
+		echo "ERROR: RAIN_GPIO_STATE not set in piGarden.conf"
+		exit 1
+	fi
+	return 0
+	case $GPIO_RESISTOR in
+		pull-up|pull-down|none) return 0 ;;
+		*) echo "ERROR: GPIO_RESISTOR not set correctly - values are \"pull-up|pull-down|none\" "
+			exit 1
+			;;
+	esac
+}
+

drv/rainsensorqty/conf_example/piGarden.conf.rainsensorqty.example

@@ -0,0 +1,14 @@
+# cfg file version 0.2.0
+# Id del gpio usato per collegare il sensore di rilevamento pioggia
+# attraverso il driver rainsensorqty
+RAIN_GPIO="drv:rainsensorqty:25"	# Physical 22 - wPi 6
+
+# Valore in ingresso sul gpio definito in RAIN_GPIO che indica lo stato di pioggia
+# variabile usata anche da drv:rainsensorqty, se e' a 1, significa che il reed contact e' collegato ad un circuito pull-down, vuol dire che attende l'impulso a 1 per contare le vaschette, normalmente e' a 0.
+# se e' a 0, significa che il reed contact e' collegato ad un circuito pull-up, vuol dire che attende l'impulso a 0 per contare le vaschette, normalmente e' a 0.
+RAIN_GPIO_STATE=0
+
+RAINSENSORQTY_LOOPSFORSETRAINING=16 # dopo 16 impulsi, 16 vaschette riempite si considera pioggia
+RAINSENSORQTY_SECSBETWEENRAINEVENT=10800 # =3h, significa che dopo 3 ore si resetta il numero di vaschette riempire e solo dopo un nuovo ciclo di riempimento si considera una nuova pioggia
+
+RAINSENSORQTY_MMEACH=0.33 # see RAINSENSORQTY driver readme for details

drv/rainsensorqty/config.include.sh

@@ -0,0 +1,66 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "config.include.sh"
+# specific driver config file
+# Version: 0.2.5
+# Data: 08/Jan/2020
+
+export TMPDIR=/tmp
+
+RAINSENSOR_DEBOUNCE=0.3 # 0.3 seconds for manage debounce of reed contact
+
+RAINSENSORQTY_verbose="yes" # yes/no
+
+RAINSENSORQTY_LASTRAIN="$STATUS_DIR/rainsensorqty_lastrain"
+RAINSENSORQTY_HISTORY="$STATUS_DIR/rainsensorqty_history"
+RAINSENSORQTY_HISTORYRAW="$STATUS_DIR/rainsensorqty_history.raw"
+RAINSENSORQTY_HISTORYTMP="$TMPDIR/rainsensorqty_history.tmp"
+
+RAINSENSORQTY_MONITORLOG="$DIR_SCRIPT/log/rainsensorqty_monitor.log"
+
+RAINSENSORQTY_MONPID="$TMPDIR/rainsensorqty_monitor.pid"
+RAINSENSORQTY_STATE="$TMPDIR/rainsensorqty_state"
+RAINSENSORQTY_STATE_HIST="$TMPDIR/rainsensorqty_state.history"
+
+RAINSENSORQTY_DIR="$DIR_SCRIPT/drv/rainsensorqty"
+
+monitor_sh="$RAINSENSORQTY_DIR/drv_rainsensorqty_monitor.sh"
+
+# internal gpio resistor, 3 values: pull-up, pull-down, none
+# pull-up/down if rain gauge is connected directly to raspberry
+# none if connected through an optocoupler circuit
+GPIO_RESISTOR="pull-up" #pull-up|pull-down|none
+
+#rising means waiting for 1 status (from 0)
+#falling means waiting for 0 status (from 1)
+#RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+#RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+(( RAIN_GPIO_STATE == 1 )) && RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+(( RAIN_GPIO_STATE == 0 )) && RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+
+
+config_check()
+{
+	var2check="RAINSENSOR_DEBOUNCE RAINSENSORQTY_verbose RAINSENSORQTY_LASTRAIN RAINSENSORQTY_HISTORY RAINSENSORQTY_MONITORLOG RAINSENSORQTY_MONPID RAINSENSORQTY_DIR monitor_sh"
+	for var in $var2check
+	do
+		#${!a}
+		if [[ -z ${!var} ]] ; then
+			echo "ERROR: \$$var not set"
+			exit 1 
+		fi
+	done
+	if [[ -z $RAINSENSORQTY_PULSE ]] ; then
+		echo "ERROR: RAIN_GPIO_STATE not set in piGarden.conf"
+		exit 1
+	fi
+	return 0
+	case $GPIO_RESISTOR in
+		pull-up|pull-down|none) return 0 ;;
+		*) echo "ERROR: GPIO_RESISTOR not set correctly - values are \"pull-up|pull-down|none\" "
+			exit 1
+			;;
+	esac
+}
+

drv/rainsensorqty/drv_rainsensorqty_monitor.sh

@@ -0,0 +1,113 @@
+#!/bin/bash
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "drv_rainsensorqty_monitor.sh"
+# monitor script
+# Version: 0.2.5c
+# Data: 08/Dec/2020
+
+resetcounter()
+{
+        (( counter = 0 ))
+        drv_rainsensorqty_writelog $f "SIGUSR1 received after last PULSE - counter resetted" & 
+        echo "SIGUSR1 received after last PULSE - counter resetted"
+}
+
+# DEBUG FUNCTION:
+testloop()
+{
+	touch /tmp/tick
+	while true
+	do
+		if [[ $( < /tmp/tick ) = "1" ]] ; then
+			break
+		fi
+		sleep 1
+	done
+}
+
+###############
+#    MAIN     #
+###############
+
+trap "resetcounter" SIGUSR1
+
+
+DIRNAME="$( dirname $0 )"
+f="$(basename $0)"
+. $DIRNAME/common.include.sh
+
+RAINSENSORQTY_VAR=$TMPDIR/.rainsensorqty_var
+
+if [[ -f "$RAINSENSORQTY_VAR" ]] ; then
+	en_echo "NORMAL: file $RAINSENSORQTY_VAR found - getting variables"
+	. "$RAINSENSORQTY_VAR"
+else
+	echo "ERROR: $RAINSENSORQTY_VAR not found"
+	exit 1
+fi
+
+#drvt="$( echo $RAIN_GPIO | $CUT -f 1 -d: )"
+#drv="$( echo $RAIN_GPIO | $CUT -f 2 -d: )"
+gpio_port="$( echo $RAIN_GPIO | $CUT -f 3 -d: )"
+
+# check if no other rain monitor process running...
+if [[ -f "$RAINSENSORQTY_MONPID" ]] ; then
+	pid="$( < "$RAINSENSORQTY_MONPID" )"
+	if ps -fp $pid >/dev/null ; then
+		drv_rainsensorqty_writelog $f "ERROR monitor process already running\n$( ps -fp $pid )"
+		exit 1
+	fi
+fi
+
+echo $$ > $RAINSENSORQTY_MONPID
+drv_rainsensorqty_writelog $f "NORMAL - $$ pid monitor process started - see $RAINSENSORQTY_MONPID"
+
+echo ""
+en_echo "---- NEW RUN ----"
+
+# check if monitor script was killed before writing a complete rain event
+check_incomplete_loop 
+case $? in 
+	2) echo "\$RAINSENSORQTY_HISTORY - wrong entry found - no fix possible" ;;
+	1) echo "\$RAINSENSORQTY_HISTORY - fixed incomplete loop" ;;
+	0) echo "\$RAINSENSORQTY_HISTORY - no incomplete loop needed to be fixed" ;;
+esac
+
+# init variables
+MMEACH="$RAINSENSORQTY_MMEACH"
+(( counter=0 ))
+before="-1"
+
+en_echo "WAITING FOR $RAINSENSORQTY_PULSE PULSE" 
+
+# loop forever
+while true
+do
+	sleep $RAINSENSOR_DEBOUNCE
+	#DEBUG: testloop #DEBUG
+	$GPIO -g wfi $gpio_port $RAINSENSORQTY_PULSE
+	now=`date +%s`
+	(( elapsed = now - before ))
+	if (( elapsed >= RAINSENSORQTY_SECSBETWEENRAINEVENT )) ; then
+		last_event="$started:$before:$counter"
+		(( counter=0 ))
+		drv_rainsensorqty_writelog $f "first drops after $elapsed seconds since last rain ( greater than $RAINSENSORQTY_SECSBETWEENRAINEVENT )- new cycle - waiting for $( $JQ -n "$RAINSENSORQTY_LOOPSFORSETRAINING * $MMEACH" ) mm of rain" &
+		(( before > 0 )) && echo $last_event >> $RAINSENSORQTY_HISTORY
+		en_echo "---- NEW CYCLE ----"
+	fi
+  	(( counter+=1 ))
+  	(( counter == 1 )) && (( started = now ))
+	echo "$now:$counter" >> ${RAINSENSORQTY_HISTORYRAW} &
+	MMWATER=$( $JQ -n "$counter*$MMEACH" )
+	en_echo $( printf "%s PULSE #%d RECEIVED (%.2f mm)" $RAINSENSORQTY_PULSE $counter $MMWATER )
+	text=$(printf "%.2f mm height (#%d pulse)" $MMWATER $counter )
+	if (( counter >= RAINSENSORQTY_LOOPSFORSETRAINING )) ; then 
+		drv_rainsensorqty_writelog $f "RAINING - $text" &
+		echo "$now:$counter" > ${RAINSENSORQTY_LASTRAIN} 
+	else
+		drv_rainsensorqty_writelog $f "now is $text" &
+	fi
+	(( before = now ))
+done

drv/rainsensorqty/init.include.sh

@@ -0,0 +1,37 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "init.include.sh"
+# Inizializza il driver, viene richiamata nella funzione init di piGarden
+# Version: 0.2.0
+# Data: 11/Aug/2019
+
+function drv_rainsensorqty_init {
+	local f="drv_rainsensorqty_init"
+
+	# format RAIN_GPIO="drv:rainsensorqty:25" 
+
+	drv_rainsensorqty_writelog $f "NORMAL: executing $monitor_sh"
+
+	# esegue rainmonitor 
+	if [ -x "$monitor_sh" ] ; then
+       		nohup "$monitor_sh" >> $RAINSENSORQTY_MONITORLOG 2>&1 &
+               	sleep 1
+		drv_rainsensorqty_writelog $f "NORMAL: $monitor_sh has pid $( < $RAINSENSORQTY_MONPID)"
+	else 
+		drv_rainsensorqty_writelog $f "ERROR: cannot find \"\$monitor_sh \" "
+	fi
+}
+
+if ! config_check ; then
+	echo "ERROR in config_check function" 
+	exit 1
+else
+	: #echo "config_check ok"
+fi
+
+check_TMPDIR
+
+RAINSENSORQTY_VAR=$TMPDIR/.rainsensorqty_var
+
+set | $GREP -e ^GPIO -e ^LOG -e ^CUT -e ^JQ -e ^RAIN -e ^SCR -e ^TMP > $RAINSENSORQTY_VAR

drv/rainsensorqty/rainsensor.include.sh

@@ -0,0 +1,104 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume, for rain meter, for rain gauge
+# Author: androtto
+# file "rainsensor.include.sh"
+# functions called by piGarden.sh
+# Version: 0.1.2
+# Data: 19/Mar/2019
+# fixed output drv_rainsensorqty_rain_sensor_get
+
+#
+# Inizializza il sensore di rilevamento pioggia 
+#
+# $1 	identificativo gpio del sensore di pioggia
+#
+drv_rainsensorqty_rain_sensor_init()
+{
+	local f=drv_rainsensorqty_rain_sensor_init
+	drv_rainsensorqty_writelog "launched: $f" $1 
+
+	local drvt="$( echo $RAIN_GPIO | $CUT -f 1 -d: )"
+	local drv="$( echo $RAIN_GPIO | $CUT -f 2 -d: )"
+	local gpio_port="$( echo $RAIN_GPIO | $CUT -f 3 -d: )"
+
+	if $GPIO -g mode $gpio_port in ; then
+		drv_rainsensorqty_writelog $f "NORMAL: '$GPIO -g mode $gpio_port in' set correctly"
+	else
+		drv_rainsensorqty_writelog $f "ERROR: '$GPIO -g mode $gpio_port in' has an error"
+		exit 1
+	fi
+
+	case $GPIO_RESISTOR in 
+		pull-up)   gpio_arg=up 
+			   message="NORMAL: '$GPIO -g mode $gpio_port up' set internal pull-up resistor"
+			;;
+		pull-down) gpio_arg=down
+			   message="NORMAL: '$GPIO -g mode $gpio_port down' set internal pull-down resistor"
+			;;
+		none)      gpio_arg=tri
+			   message="NORMAL: '$GPIO -g mode $gpio_port tri' set none to internal resistor"
+			;;
+		*) echo "ERROR: GPIO_RESISTOR not set correctly - values are \"pull-up|pull-down|none\" "
+			drv_rainsensorqty_writelog "drv_rainsensorqty_rain_sensor_init" "ERROR: GPIO_RESISTOR not set correctly - values are \"pull-up|pull-down|none\" "
+			exit 1
+			;;
+	esac
+	if $GPIO -g mode $gpio_port $gpio_arg ; then
+		drv_rainsensorqty_writelog $f "$message"
+	else
+		drv_rainsensorqty_writelog $f "ERROR: '$GPIO -g mode $gpio_port $gpio_arg' command"
+		exit 1
+	fi
+}
+
+#
+# Ritorna in output lo stato del sensore di rilevamento pioggia 
+#
+# $1 	identificativo gpio del sensore di pioggia
+#
+# restituisce 0 se piove, e nell'output di testo il valore di "$RAIN_GPIO_STATE"
+# restituisce 99 se non piove, output "norain"
+# esce con 1 se non c'e' il monitoring, output "ERROR"
+drv_rainsensorqty_rain_sensor_get()
+{
+	local now=$(date +%s)
+	local interval=60 #   because check_rain_sensor is scheduled once a minute ... to changed if schedule is modified, from crontab:
+	#* * * * * /home/pi/piGarden/piGarden.sh check_rain_sensor 2> /tmp/check_rain_sensor.err
+
+ 	local f="drv_rainsensorqty_check"
+	
+	# script called with:	
+	#drv_rainsensorqty_writelog $f $1
+	# ignora il parametro di $1, lo recupera dal file di configurazione
+
+	# verifica se lo script di monitoring e' attivo
+	if drv_rainsensorqty_check ; then
+ 		drv_rainsensorqty_writelog $f "NORMAL - drv_rainsensorqty_check ok, monitor process running"
+		if [ -f "$RAINSENSORQTY_LASTRAIN" ] ; then
+			local lastrain="$( cat "$RAINSENSORQTY_LASTRAIN" | $CUT -f 1 -d: )"
+			local counter="$( cat "$RAINSENSORQTY_LASTRAIN" | $CUT -f 2 -d: )"
+		        LEVEL=$( $JQ -n "$counter/$RAINSENSORQTY_LOOPSFORSETRAINING" | $JQ 'floor' )
+		        (( diff = now - lastrain ))
+			drv_rainsensorqty_writelog $f "NORMAL: last rain $( date --date="@$lastrain"  ) - LEVEL $LEVEL rain"
+			drv_rainsensorqty_writelog $f "NORMAL: check rain $( date --date="@$now"  ) "
+			if (( diff <= interval )) ; then
+				drv_rainsensorqty_writelog $f "RAIN - return \$RAIN_GPIO_STATE = $RAIN_GPIO_STATE as output"
+				drv_rainsensorqty_writelog $f "DEBUG : check rain - diff $diff < $interval - return $RAIN_GPIO_STATE"
+				msg="$RAIN_GPIO_STATE" 
+				echo $msg
+				return 0
+			else 
+				drv_rainsensorqty_writelog $f "NO_RAIN - return \"norain\" as output"
+				drv_rainsensorqty_writelog $f "DEBUG : check rain - diff $diff < $interval - return 99"
+				msg="norain"
+				echo $msg
+				return 99
+			fi
+		fi
+	else
+ 		drv_rainsensorqty_writelog $f "ERROR: drv_rainsensorqty_check failed, no monitor process running ($monitor_sh)"
+		msg="ERROR"
+		echo $msg
+		return 1
+	fi	
+}

drv/remote/rele.include.sh

@@ -35,7 +35,7 @@ function drv_remote_rele_open {
 		error="${error%\"}"
 		error="${error#\"}"
 		echo "error=$error"
-	        log_write "Remote rele open error: $error"
+	        log_write "drv_remote" "error" "Remote rele open error: $error"
         	message_write "warning" "Remote rele open error: $error"
 		return 1
 	fi
@@ -68,7 +68,7 @@ function drv_remote_rele_close {
 		error="${error%\"}"
 		error="${error#\"}"
 		echo "error=$error"
-	        log_write "Remote rele close error: $error"
+	        log_write "drv_remoter" "error" "Remote rele close error: $error"
         	message_write "warning" "Remote rele close error: $error"
 		return 1
 	fi

drv/sample/common.include.sh

@@ -5,7 +5,7 @@
 #
 # Funzione di esempio
 #
-function sample_foo {
+function drv_sample_foo {
 
 	echo "bar"
 

drv/sonoff_tasmota_http/rele.include.sh

@@ -35,7 +35,7 @@ function drv_sonoff_tasmota_http_rele_open {
 		error="${error%\"}"
 		error="${error#\"}"
 		echo "error=$error"
-	        log_write "Remote rele open error: $error"
+	        log_write "drv_sonoff_tasmota_http" "error" "Remote rele open error: $error"
         	message_write "warning" "Remote rele open error: $error"
 		return 1
 	fi
@@ -69,7 +69,7 @@ function drv_sonoff_tasmota_http_rele_close {
 		error="${error%\"}"
 		error="${error#\"}"
 		echo "error=$error"
-	        log_write "Remote rele close error: $error"
+	        log_write "drv_sonoff_tasmota_http" "error" "Remote rele close error: $error"
         	message_write "warning" "Remote rele close error: $error"
 		return 1
 	fi

drv/spb16ch/common.include.sh

@@ -74,7 +74,7 @@ function drv_spb16ch_boards_id_load {
 			SPB16CH_USED_ID+=("$board_id")
 		done
 	else
-		log_write "spb16ch: file $SPB16CH_BOARD_ID_STORE_FILE not found: remember to run 'piGarden init' to generate the file"
+		log_write "drv_spb16ch" "error" "spb16ch: file $SPB16CH_BOARD_ID_STORE_FILE not found: remember to run 'piGarden init' to generate the file"
 	fi
 
 }

drv/spb16ch/rele.include.sh

@@ -19,7 +19,7 @@ function drv_spb16ch_rele_open {
 	local rele_data=${SPB16CH_RELE_MAP[$rele_id]}
 	if [[ -z $rele_data ]]; then
 		local message="Error - Rele map not defined - rele_id=$rele_id - ($1)"
-		log_write "$message"
+		log_write "drv_spb16ch" "error" "$message"
 		message_write "warning" "$message"
 	fi
 	local address_num=${rele_data:0:2}
@@ -52,7 +52,7 @@ function drv_spb16ch_rele_close {
 	local rele_data=${SPB16CH_RELE_MAP[$rele_id]}
 	if [[ -z $rele_data ]]; then
 		local message="Error - Rele map not defined - rele_id=$rele_id - ($1)"
-		log_write "$message"
+		log_write "drv_spb16ch" "error" "$message"
 		message_write "warning" "$message"
 	fi
 	local address_num=${rele_data:0:2}

include/cron.include.sh

@@ -10,7 +10,7 @@ function cron_del {
 
 	if [ -z "$CRON_TYPE" ]; then
 		echo "Cron type is empty" >&2
-		log_write "Cron type is empty"
+		log_write "cron" "error" "Cron type is empty"
 		return 1
 	fi
 
@@ -25,17 +25,17 @@ function cron_del {
 	fi
 	if ! [[ $START =~ $re ]] ; then
   		echo "Cron start don't find" >&2
-  		log_write "Cron start don't find"
+  		log_write "cron" "error" "Cron start don't find"
 		return 1
 	fi
 	if ! [[ $END =~ $re ]] ; then
   		echo "Cron end cron don't find" >&2
-  		log_write "Cron end cron don't find"
+  		log_write "cron" "error" "Cron end cron don't find"
 		return 1
 	fi
 	if [ "$START" -gt "$END" ]; then
   		echo "Wrong position for start and end in cron" >&2
-  		log_write "Wrong position for start and end in cron"
+  		log_write "cron" "error" "Wrong position for start and end in cron"
 		return 1
 	fi
 
@@ -74,7 +74,7 @@ function cron_add {
 
 	if [ -z "$CRON_TYPE" ]; then
 		echo "Cron type is empty" >&2
-		log_write "Cron type is empty"
+		log_write "cron" "error" "Cron type is empty"
 		return 1
 	fi
 
@@ -91,12 +91,12 @@ function cron_add {
 	else
 		if ! [[ $START =~ $re ]] ; then
   			echo "Cron start don't find" >&2
-  			log_write "Cron start don't find"
+  			log_write "cron" "error" "Cron start don't find"
 			return 1
 		fi
 		if ! [[ $END =~ $re ]] ; then
   			echo "Cron end cron don't find" >&2
-  			log_write "Cron end cron don't find"
+  			log_write "cron" "error" "Cron end cron don't find"
 			return 1
 		fi
 		START=$(($START + 1))
@@ -104,7 +104,7 @@ function cron_add {
 
 		if [ "$START" -gt "$END" ]; then
   			echo "Wrong position for start and end in cron" >&2
-  			log_write "Wrong position for start and end in cron"
+  			log_write "cron" "error" "Wrong position for start and end in cron"
 			return 1
 		fi
 		
@@ -183,7 +183,7 @@ function cron_add {
 
 		*)
 			echo "Wrong cron type: $CRON_TYPE"
-			log_write "Wrong cron type: $CRON_TYPE"
+			log_write "cron" "error" "Wrong cron type: $CRON_TYPE"
 			;;
 
 	esac
@@ -225,7 +225,7 @@ function cron_get {
 
 	if [ -z "$CRON_TYPE" ]; then
 		echo "Cron type is empty" >&2
-		log_write "Cron type is empty"
+		log_write "cron" "error" "Cron type is empty"
 		return 1
 	fi
 
@@ -241,12 +241,12 @@ function cron_get {
 	else
 		if ! [[ $START =~ $re ]] ; then
   			echo "Cron start don't find" >&2
-  			log_write "Cron start don't find"
+  			log_write "cron" "error" "Cron start don't find"
 			return 1
 		fi
 		if ! [[ $END =~ $re ]] ; then
   			echo "Cron end cron don't find" >&2
-  			log_write "Cron end cron don't find"
+  			log_write "cron" "error" "Cron end cron don't find"
 			return 1
 		fi
 		START=$(($START + 1))
@@ -254,7 +254,7 @@ function cron_get {
 
 		if [ "$START" -gt "$END" ]; then
   			echo "Wrong position for start and end in cron" >&2
-  			log_write "Wrong position for start and end in cron"
+  			log_write "cron" "error" "Wrong position for start and end in cron"
 			return 1
 		fi
 		
@@ -370,7 +370,7 @@ function add_cron_open {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -387,7 +387,7 @@ function del_cron_open {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -404,7 +404,7 @@ function get_cron_open {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -421,7 +421,7 @@ function del_cron_open_in {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -439,7 +439,7 @@ function get_cron_close {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -462,7 +462,7 @@ function add_cron_close {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -479,7 +479,7 @@ function del_cron_close {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -559,7 +559,79 @@ function cron_disable_all_open_close {
 		fi
 		
         done
-
-
-
+}
+
+
+
+#
+# Attiva tutte le schedulazioni di apertura e chiusura elettrovalvole
+#
+function cron_enable_all_open_close {
+
+	local a=""
+	local al=""
+	local cron=""
+
+	#
+	# Disabilita tutte le schedulazioni di apertura
+	#
+        for i in $(seq $EV_TOTAL)
+        do
+                a=EV"$i"_ALIAS
+                al=${!a}
+                local crons=`get_cron_open $al`
+		if [[ ! -z "$crons" ]]; then
+			del_cron_open $al
+			IFS=$'\n'       # make newlines the only separator
+			for cron in $crons
+			do
+				#echo "-- $cron --"
+				CRON_M=`echo $cron | $CUT -d' ' -f1,1`
+				CRON_H=`echo $cron | $CUT -d' ' -f2,2`
+				CRON_DOM=`echo $cron | $CUT -d' ' -f3,3`
+				CRON_MON=`echo $cron | $CUT -d' ' -f4,4`
+				CRON_DOW=`echo $cron | $CUT -d' ' -f5,5`
+
+				if [[ ${CRON_M:0:1} == "#" ]]; then
+					CRON_M=${CRON_M:1:${#CRON_M}}
+				fi
+				#echo "++ $CRON_M $CRON_H $CRON_DOM $CRON_MON $CRON_DOW ++"
+
+				add_cron_open $al "$CRON_M" "$CRON_H" "$CRON_DOM" "$CRON_MON" "$CRON_DOW"
+			done
+		fi
+		
+        done
+
+
+	#
+	# Disabilita tutte le schedulazioni di chiusura
+	#
+        for i in $(seq $EV_TOTAL)
+        do
+                a=EV"$i"_ALIAS
+                al=${!a}
+                local crons=`get_cron_close $al`
+		if [[ ! -z "$crons" ]]; then
+			del_cron_close $al
+			IFS=$'\n'       # make newlines the only separator
+			for cron in $crons
+			do
+				#echo "-- $cron --"
+				CRON_M=`echo $cron | $CUT -d' ' -f1,1`
+				CRON_H=`echo $cron | $CUT -d' ' -f2,2`
+				CRON_DOM=`echo $cron | $CUT -d' ' -f3,3`
+				CRON_MON=`echo $cron | $CUT -d' ' -f4,4`
+				CRON_DOW=`echo $cron | $CUT -d' ' -f5,5`
+
+				if [[ ${CRON_M:0:1} == "#" ]]; then
+					CRON_M=${CRON_M:1:${#CRON_M}}
+				fi
+				#echo "++ $CRON_M $CRON_H $CRON_DOM $CRON_MON $CRON_DOW ++"
+
+				add_cron_close $al "$CRON_M" "$CRON_H" "$CRON_DOM" "$CRON_MON" "$CRON_DOW"
+			done
+		fi
+		
+        done
 }

include/drv.include.sh

@@ -1,11 +1,15 @@
 declare -a list_drv
 
+#
+# Funzione eseguita ad ogni avvio di piGarden.sh, si occupa includere tutti i file dei driver utilizzati e di lanciare
+# la funzione di setup di ogni driver se esistente
+#
 function setup_drv { 
 
 	#declare -a list_drv
 	list_drv=()
 
-        # Inizializza i driver per le elettrovalvole
+        # Raccoglie i nomi dei driver utilizzati per le elettrovalvole
         for i in $(seq $EV_TOTAL)
         do
                 local a=EV"$i"_GPIO
@@ -18,7 +22,7 @@ function setup_drv {
 		fi
         done
 
-	# Inizializza i driver per gli altri gpio
+	# Raccoglie i nomi dei driver utilizzati per gli altri gpio
 	for gpio in "$SUPPLY_GPIO_1" "$SUPPLY_GPIO_2" "$RAIN_GPIO" "$WEATHER_SERVICE"
 	do
 		if [[ "$gpio" == drv:* ]]; then
@@ -29,6 +33,9 @@ function setup_drv {
 		fi
 	done
 
+	#
+	# Esegue l'unclusione dei file dei driver e per ognuno lancia l'eventuale funzione di setup
+	#
 	local file_drv
 	for drv in "${list_drv[@]}"
 	do
@@ -87,7 +94,7 @@ function drv_rele_init {
                 $GPIO -g mode $idx out                # setta il gpio nella modalita di scrittura
 	# Il driver definito non è stato trovato
 	elif [ "$fnc" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
 	else
 		echo "$(date) $fnc arg:$idx" >> "$LOG_OUTPUT_DRV_FILE"
@@ -109,7 +116,7 @@ function drv_rele_close {
 		$GPIO -g write $idx $RELE_GPIO_CLOSE	
 	# Il driver definito non è stato trovato
 	elif [ "$fnc" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
 		return 1
 	else
@@ -135,7 +142,7 @@ function drv_rele_open {
 		$GPIO -g write $idx $RELE_GPIO_OPEN	
 	# Il driver definito non è stato trovato
 	elif [ "$fnc" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
 		return 1
 	else
@@ -165,7 +172,7 @@ function drv_supply_bistable_init {
 		$GPIO -g mode $idx1 out
 	# Il driver definito non è stato trovato
 	elif [ "$fnc1" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx1"
+	        log_write "drv" "error" "Driver not found: $idx1"
         	message_write "warning" "Driver not found: $idx1"
 		return
 	else
@@ -179,7 +186,7 @@ function drv_supply_bistable_init {
 		$GPIO -g mode $idx2 out
 	# Il driver definito non è stato trovato
 	elif [ "$fnc2" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx2"
+	        log_write "drv" "error" "Driver not found: $idx2"
         	message_write "warning" "Driver not found: $idx2"
 	else
 		echo "$(date) $fnc2 arg:$idx2" >> "$LOG_OUTPUT_DRV_FILE"
@@ -205,7 +212,7 @@ function drv_supply_positive {
 		$GPIO -g write $idx1 $SUPPLY_GPIO_POS
 	# Il driver definito non è stato trovato
 	elif [ "$fnc1" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx1"
+	        log_write "drv" "error" "Driver not found: $idx1"
         	message_write "warning" "Driver not found: $idx1"
 		return
 	else
@@ -218,7 +225,7 @@ function drv_supply_positive {
 		$GPIO -g write $idx2 $SUPPLY_GPIO_POS
 	# Il driver definito non è stato trovato
 	elif [ "$fnc2" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx2"
+	        log_write "drv" "error" "Driver not found: $idx2"
         	message_write "warning" "Driver not found: $idx2"
 	else
 		echo "$(date) $fnc2 arg:$idx2" >> "$LOG_OUTPUT_DRV_FILE"
@@ -244,7 +251,7 @@ function drv_supply_negative {
 		$GPIO -g write $idx1 $SUPPLY_GPIO_NEG
 	# Il driver definito non è stato trovato
 	elif [ "$fnc1" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx1"
+	        log_write "drv" "error" "Driver not found: $idx1"
         	message_write "warning" "Driver not found: $idx1"
 		return
 	else
@@ -257,7 +264,7 @@ function drv_supply_negative {
 		$GPIO -g write $idx2 $SUPPLY_GPIO_NEG
 	# Il driver definito non è stato trovato
 	elif [ "$fnc2" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx2"
+	        log_write "drv" "error" "Driver not found: $idx2"
         	message_write "warning" "Driver not found: $idx2"
 	else
 		echo "$(date) $fnc2 arg:$idx2" >> "$LOG_OUTPUT_DRV_FILE"
@@ -281,7 +288,7 @@ function drv_rain_sensor_init {
 		$GPIO -g mode $idx in
 	# Il driver definito non è stato trovato
 	elif [ "$fnc" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
 	else
 		echo "$(date) $fnc arg:$idx" >> "$LOG_OUTPUT_DRV_FILE"
@@ -305,7 +312,7 @@ function drv_rain_sensor_get {
 		vret=`$GPIO -g read $idx`
 	# Il driver definito non è stato trovato
 	elif [ "$fnc" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
 	else
 		echo "$(date) $fnc arg:$idx" >> "$LOG_OUTPUT_DRV_FILE"
@@ -328,11 +335,11 @@ function drv_rain_online_get {
 
 	# Nessun driver definito, esegue la lettura del sensore tramite gpio del raspberry
 	if [ -z "$fnc" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
 	# Il driver definito non è stato trovato
 	elif [ "$fnc" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
 	else
 		echo "$(date) $fnc arg:$idx" >> "$LOG_OUTPUT_DRV_FILE"

include/rain.include.sh

@@ -4,7 +4,7 @@
 function check_rain_online {
 
 	if [ "$WEATHER_SERVICE" == "none" ]; then
-		log_write "check_rain_online - online service is disable"
+		log_write "rain" "warning" "check_rain_online - online service is disabled"
 		return
 	fi
 
@@ -17,7 +17,7 @@ function check_rain_online {
 
 	if [[ $local_epoch =~ ^-?[0-9]+$ ]]; then
 		if [ $local_epoch -eq 0 ]; then
-			log_write "check_rain_online - failed read online data"
+			log_write "rain" "error" "check_rain_online - failed read online data"
 		else
 			if [ $local_epoch -gt 0 ]; then
 				current_state_rain_online='rain'
@@ -27,14 +27,14 @@ function check_rain_online {
 			fi
 			weather=$(cat "$STATUS_DIR/last_weather_online" | $JQ -M ".weather")
 			
-			log_write "check_rain_online - weather=$weather, local_epoch=$local_epoch"
+			log_write "rain" "info" "check_rain_online - weather=$weather, local_epoch=$local_epoch"
 			if [ "$current_state_rain_online" != "$last_state_rain_online" ]; then
 				echo "$current_state_rain_online" > "$STATUS_DIR/last_state_rain_online"
 				trigger_event "check_rain_online_change" "$current_state_rain_online" "$weather"
 			fi
 		fi
 	else
-		log_write "check_rain_online - failed read online data"
+		log_write "rain" "error" "check_rain_online - failed read online data"
 	fi
 
 	trigger_event "check_rain_online_after" "$current_state_rain_online" "$weather"
@@ -57,11 +57,11 @@ function check_rain_sensor {
 			current_state_rain_sensor='rain'
 			local local_epoch=`date +%s`
 			echo $local_epoch > "$STATUS_DIR/last_rain_sensor"
-			log_write "check_rain_sensor - now it's raining ($local_epoch)"
+			log_write "rain" "info" "check_rain_sensor - now it's raining ($local_epoch)"
 			#return $local_epoch	
 		else
 			current_state_rain_sensor='norain'
-			log_write "check_rain_sensor - now is not raining"
+			log_write "rain" "info" "check_rain_sensor - now is not raining"
 		fi
 		if [ "$current_state_rain_sensor" != "$last_state_rain_sensor" ]; then
 			echo "$current_state_rain_sensor" > "$STATUS_DIR/last_state_rain_sensor"
@@ -69,7 +69,7 @@ function check_rain_sensor {
 		fi
 		trigger_event "check_rain_sensor_after" "$current_state_rain_sensor"
 	else
-		log_write "Rain sensor not present"
+		log_write "rain" "warning" "Rain sensor not present"
 	fi
 
 }
@@ -113,7 +113,7 @@ function close_all_for_rain {
 			#echo "$al = $state"
 			if [ "$state" = "1" ] && [ "$evnorain" != "1" ]; then
 				ev_close $al
-				log_write "close_all_for_rain - Close solenoid '$al' for rain"
+				log_write "irrigate" "warning" "close_all_for_rain - Close solenoid '$al' for rain"
 			fi
 		done
 	fi

include/socket.include.sh

@@ -19,7 +19,7 @@ function stop_socket_server {
                 exit 1
         fi
 
-	log_write "stop socket server"
+	log_write "socket_server" "info" "stop socket server"
 
         kill -9 $(list_descendants `cat "$TCPSERVER_PID_FILE"`) 2> /dev/null
         kill -9 `cat "$TCPSERVER_PID_FILE"` 2> /dev/null
@@ -44,7 +44,7 @@ function socket_server_command {
 		user=$(echo "$user" | $TR -d '[\r\n]')
 		password=$(echo "$password" | $TR -d '[\r\n]')
 		if [ "$user" != "$TCPSERVER_USER" ] || [ "$password" != "$TCPSERVER_PWD" ]; then
-			log_write "socket connection from: $TCPREMOTEIP - Bad socket server credentials - user:$user"
+			log_write "socket_server" "warning" "socket connection from: $TCPREMOTEIP - Bad socket server credentials - user:$user"
 			json_error 0 "Bad socket server credentials"
 			return
 		fi
@@ -61,7 +61,7 @@ function socket_server_command {
 	arg7=$(echo "$line " | $CUT -d ' ' -f7)
 	arg8=$(echo "$line " | $CUT -d ' ' -f8)
 
-	log_write "socket connection from: $TCPREMOTEIP - command: $arg1 $arg2 $arg3 $arg4 $arg5 $arg6 $arg7 $arg8"
+	log_write "socket_server" "info" "socket connection from: $TCPREMOTEIP - command: $arg1 $arg2 $arg3 $arg4 $arg5 $arg6 $arg7 $arg8"
 	
 	#reset_messages &> /dev/null
 
@@ -102,6 +102,12 @@ function socket_server_command {
 			json_status
 			;;
 
+		cron_enable_all_open_close)
+			cron_enable_all_open_close &> /dev/null
+			message_write "success" "All solenoid enabled"
+			json_status
+			;;
+
 		set_general_cron)
 			local vret=""
 			for i in $arg2 $arg3 $arg4 $arg5 $arg6 $arg7
@@ -121,7 +127,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron set failed"
-				log_write "Cron set failed: $vret"
+				log_write "socket_server" "error" "Cron set failed: $vret"
 			else
 				message_write "success" "Cron set successfull"
 				json_status
@@ -136,7 +142,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron set failed"
-				log_write "Cron del failed: $vret"
+				log_write "socket_server" "error" "Cron del failed: $vret"
 			else
 				message_write "success" "Cron set successfull"
 				json_status
@@ -151,7 +157,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron del failed"
-				log_write "Cron del failed: $vret"
+				log_write "socket_server" "error" "Cron del failed: $vret"
 			else
 				message_write "success" "Scheduled start successfully deleted"
 				json_status "get_cron_open_in:$arg2"
@@ -167,7 +173,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron set failed"
-				log_write "Cron set failed: $vret"
+				log_write "socket_server" "error" "Cron set failed: $vret"
 			else
 				message_write "success" "Cron set successfull"
 				json_status
@@ -182,7 +188,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron set failed"
-				log_write "Cron set failed: $vret"
+				log_write "socket_server" "error" "Cron set failed: $vret"
 			else
 				message_write "success" "Cron set successfull"
 				json_status
@@ -197,7 +203,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron set failed"
-				log_write "Cron set failed: $vret"
+				log_write "socket_server" "error" "Cron set failed: $vret"
 			else
 				message_write "success" "Cron set successfull"
 				json_status
@@ -205,6 +211,21 @@ function socket_server_command {
 
 			;;
 
+		cmd_pigardensched)
+			local vret=""
+
+			vret=`cmd_pigardensched $arg2 $arg3 $arg4 $arg5 $arg6`
+
+			if [[ ! -z $vret ]]; then
+				json_error 0 "piGardenSched command failed"
+				log_write "socket_server" "error" "piGardenSched command failed: $vret"
+			else
+				message_write "success" "Schedule set successfull"
+				json_status
+			fi
+
+			;;
+
 		reboot)
 			message_write "warning" "System reboot is started"
 			json_status

piGarden.sh

@@ -10,7 +10,7 @@
 #
 function initialize {
 
-	log_write "Run initialize"
+	log_write "general" "info" "Run initialize"
 
 	unlock
 
@@ -50,13 +50,13 @@ function initialize {
 	# Inizializza il sensore di rilevamento pioggia
 	if [ -n "$RAIN_GPIO" ]; then 
 		drv_rain_sensor_init "$RAIN_GPIO"
-		log_write "Rain sensor initialized"
+		log_write "rain" "info" "Rain sensor initialized"
 	else
-		log_write "Rain sensor not present"
+		log_write "rain" "info" "Rain sensor not present"
 	fi
 
 	trigger_event "init_after" ""
-	log_write "End initialize"
+	log_write "general" "info" "End initialize"
 
 }
 
@@ -98,7 +98,7 @@ function ev_open {
 				message_write "warning" "Solenoid not open for rain"
 				trigger_event "ev_not_open_for_rain_online" "$1" 
 				trigger_event "ev_not_open_for_rain" "$1" 
-				log_write "Solenoid '$1' not open for rain (online check)"
+				log_write "irrigate" "warning" "Solenoid '$1' not open for rain (online check)"
 				return
 			fi
 		fi
@@ -113,7 +113,7 @@ function ev_open {
 				message_write "warning" "Solenoid not open for rain"
 				trigger_event "ev_not_open_for_rain_sensor" "$1" 
 				trigger_event "ev_not_open_for_rain" "$1" 
-				log_write "Solenoid '$1' not open for rain (sensor check)"
+				log_write "irrigate" "warning" "Solenoid '$1' not open for rain (sensor check)"
 				return
 			fi
 		fi
@@ -126,7 +126,7 @@ function ev_open {
 
 	trigger_event "ev_open_before" "$1" "$2"
 	if [ $? -ne 0 ]; then
-		log_write "Solenoid '$1' not open due to external event"
+		log_write "irrigate" "warning" "Solenoid '$1' not open due to external event"
 		message_write 'warning' "Solenoid not open due to external event"
 		mqtt_status
 		return
@@ -150,7 +150,7 @@ function ev_open {
 
 	ev_set_state $EVNUM $state
 
-	log_write "Solenoid '$1' open"
+	log_write "irrigate" "info" "Solenoid '$1' open"
 	message_write "success" "Solenoid open"
 
 	trigger_event "ev_open_after" "$1" "$2"
@@ -223,9 +223,6 @@ function ev_open_in {
 
 	trigger_event "ev_open_in_after" "$3" "$4" "$cron_start" "$cron_stop"
 
-	#echo $cron_start
-	#echo $cron_stop
-
 }
 
 
@@ -262,7 +259,7 @@ function ev_close {
 
 	ev_set_state $EVNUM 0
 
-	log_write "Solenoid '$1' close"
+	log_write "irrigate" "info" "Solenoid '$1' close"
 	message_write "success" "Solenoid close"
 
 	trigger_event "ev_close_after" "$1"
@@ -288,7 +285,9 @@ function supply_negative {
 
 #
 # Scrive un messaggio nel file di log
-# $1 log da scrivere
+# $1 type
+# $2 level
+# $3 log da scrivere
 #
 function log_write {
 	if [ -e "$LOG_FILE" ]; then
@@ -299,7 +298,33 @@ function log_write {
 		fi
 	fi
 
-	echo -e "`date`\t\t$1" >> $LOG_FILE
+	if [ -e "$LOG_OUTPUT_DRV_FILE" ]; then
+		local actualsize=$($WC -c <"$LOG_OUTPUT_DRV_FILE")
+		if [ $actualsize -ge $LOG_FILE_MAX_SIZE ]; then
+			$GZIP $LOG_OUTPUT_DRV_FILE
+			$MV $LOG_OUTPUT_DRV_FILE.gz $LOG_OUTPUT_DRV_FILE.`date +%Y%m%d%H%M`.gz	
+		fi
+	fi
+
+	echo -e "`date`\t\t$1\t$2\t$3" >> $LOG_FILE
+
+	log_send "$1" "$2" "`date '+%Y-%m-%d %H:%M:%S'`" "$3"
+
+}
+
+#
+# Invia un log verso piGardenWeb
+# $1 type
+# $2 level
+# $3 date time
+# $4 messaggio
+#
+function log_send {
+
+	if [[ ! -z "$LOG_URL" ]]; then
+		$CURL $LOG_CURL_PARAM "$LOG_URL" -d "api_token=$LOG_API_TOKEN&type=$1&level=$2&datetime_log=$3&message=$4" &> /dev/null &
+	fi
+
 }
 
 #
@@ -368,7 +393,7 @@ function gpio_alias2number {
 		fi
 	done
 
-	log_write "ERROR solenoid alias not found: $1"
+	log_write "general" "error" "ERROR solenoid alias not found: $1"
 	message_write "warning" "Solenoid alias not found"
 	mqtt_status
 	exit 1
@@ -388,7 +413,7 @@ function ev_alias2number {
 		fi
 	done
 
-	log_write "ERROR solenoid alias not found: $1"
+	log_write "general" "error" "ERROR solenoid alias not found: $1"
 	message_write "warning" "Solenoid alias not found"
 	mqtt_status
 	exit 1
@@ -475,7 +500,7 @@ function close_all {
 			#echo "$al = $state"
 			if [[ "$state" -gt "0" || "$1" = "force" ]]; then
 				ev_close $al
-				log_write "close_all - Close solenoid '$al' for rain"
+				log_write "irrigate" "info" "close_all - Close solenoid '$al' for rain"
 			fi
 		done
 
@@ -498,8 +523,9 @@ function list_alias {
 #
 # Stampa un json contanente lo status della centralina
 # $1 .. $6 parametri opzionali
-# 	- get_cron: aggiunge i dati relativi ai crontab delle scehdulazioni di apertura/chisura delle elettrovalvole
+# 	- get_cron: aggiunge i dati relativi ai crontab delle scehdulazioni di apertura/chisura
 #	- get_cron_open_in: aggiunge i dati relativi ai crontab degli avvii ritardati eseguiti con il comando open_in
+#       - get_schedule: aggiunge i dati relativi alle schedulazioni di piGardenSched
 #
 function json_status {
 	local json=""
@@ -513,6 +539,7 @@ function json_status {
 	local last_success=""
 	local with_get_cron="0"
 	local with_get_cron_open_in="0"
+	local with_get_schedule="0"
 	local current_pid=$!
 	local json_event="\"event\": {\"event\": \"$CURRENT_EVENT\", \"alias\": \"$CURRENT_EVENT_ALIAS\"}"
 
@@ -531,9 +558,12 @@ function json_status {
 			with_get_cron_open_in="1"
 		elif [[ "$i" == get_cron_open_in:* ]]; then
 			with_get_cron_open_in="${i#get_cron_open_in:}"
+		elif [ $i = "get_schedule" ] && [[ $PIGARDENSCHED == "1" ]]; then
+			with_get_schedule="1"
 		fi
 	done
 
+	local json_ev=""
 	for i in $(seq $EV_TOTAL)
 	do
 		local a=EV"$i"_ALIAS
@@ -543,10 +573,14 @@ function json_status {
 		if [ -n "$json" ]; then
 			json="$json,"
 		fi
-		#json="$json\"$i\":{\"name\":\"$av\",\"state\":$sv}"
 		json="$json\"$av\":{\"name\":\"$av\",\"state\":$sv}"
+
+		if [ -n "$json_ev" ]; then
+			json_ev="$json_ev,"
+		fi
+		json_ev="$json_ev\"$a\":{\"alias\":\"$av\"}"
 	done
-	json="\"zones\":{$json}"
+	json="\"zones\":{$json},\"ev\":{$json_ev}"
 
 	local last_rain_sensor=`cat "$STATUS_DIR/last_rain_sensor" 2> /dev/null`
 	local last_rain_online=`cat "$STATUS_DIR/last_rain_online" 2> /dev/null`
@@ -555,15 +589,7 @@ function json_status {
 	if [[ ! -z "$last_weather_online" ]]; then
 		json_last_weather_online=$last_weather_online
 	fi
-	#if [ -f "$LAST_INFO_FILE.$current_pid" ]; then
-	#	last_info=`cat "$LAST_INFO_FILE.$current_pid"`
-	#fi
-	#if [ -f "$LAST_WARNING_FILE.$current_pid" ]; then
-	#	last_warning=`cat "$LAST_WARNING_FILE.$current_pid"`
-	#fi
-	#if [ -f "$LAST_SUCCESS_FILE.$current_pid" ]; then
-	#	last_success=`cat "$LAST_SUCCESS_FILE.$current_pid"`
-	#fi
+
 	last_info="$MESSAGE_INFO"
 	last_warning="$MESSAGE_WARNING"
 	last_success="$MESSAGE_SUCCESS"
@@ -607,6 +633,24 @@ function json_status {
 	fi
 	local json_cron="\"cron\":{$json_get_cron}"			
 
+	local json_get_schedule=""			
+	local json_schedule=""
+	if [ $with_get_schedule != "0" ]; then
+		json_get_schedule=""
+		for scheduled in `$PIGARDENSCHED_PATH sched`
+		do
+			local ev=$(echo $scheduled|$CUT -f1 -d";")
+			local evcomplete="$ev"_ALIAS
+			local al=${!evcomplete}
+			local json_get_schedule="\"$ev\": {\"alias\": \"$al\", \"entry\": \"$scheduled\"}, $json_get_schedule"
+		done
+		if [[ !  -z  $json_get_schedule ]]; then
+			json_get_schedule="${json_get_schedule::-2}"
+		fi
+	
+		local json_schedule=", \"schedule\":{$json_get_schedule}"
+	fi
+
 	local json_get_cron_open_in=""			
 	if [ $with_get_cron_open_in != "0" ]; then
 		local values_open_in="" 
@@ -641,7 +685,7 @@ function json_status {
 	local json_cron_open_in="\"cron_open_in\":{$json_get_cron_open_in}"
 	local json_timestamp="\"timestamp\": $(date +%s)"
 
-	json="{$json_version,$json_timestamp,$json_event,$json,$json_last_weather_online,$json_error,$json_last_info,$json_last_warning,$json_last_success,$json_last_rain_online,$json_last_rain_sensor,$json_cron,$json_cron_open_in}"
+	json="{$json_version,$json_timestamp,$json_event,$json,$json_last_weather_online,$json_error,$json_last_info,$json_last_warning,$json_last_success,$json_last_rain_online,$json_last_rain_sensor,$json_cron,$json_cron_open_in $json_schedule}"
 
 	echo "$json"
 
@@ -683,7 +727,7 @@ function show_usage {
 	echo -e "\t$NAME_SCRIPT list_alias                                   view list of aliases solenoid"
 	echo -e "\t$NAME_SCRIPT ev_status alias                              show status solenoid"
 	echo -e "\t$NAME_SCRIPT ev_status_all                                show status solenoids"
-	echo -e "\t$NAME_SCRIPT json_status [get_cron|get_cron_open_in]      show status in json format"
+	echo -e "\t$NAME_SCRIPT json_status [get_cron|get_cron_open_in|get_schedule] show status in json format"
 	echo -e "\t$NAME_SCRIPT mqtt_status                                  send status in json format to mqtt broker"
 	echo -e "\t$NAME_SCRIPT check_rain_online                            check rain from http://api.wunderground.com/"
 	echo -e "\t$NAME_SCRIPT check_rain_sensor                            check rain from hardware sensor"
@@ -715,6 +759,8 @@ function show_usage {
 	echo -e "\t$NAME_SCRIPT del_cron_close alias                         remove all crontab for close a solenoid"
 	echo -e "\t$NAME_SCRIPT get_cron_close alias                         get all crontab for close a solenoid"
 	echo -e "\n"
+	echo -e "\t$NAME_SCRIPT cmd_pigardensched [prm1 [prm2 [prm3]...]]    performs a pigardensched command"
+	echo -e "\n"
 	echo -e "\t$NAME_SCRIPT debug1 [parameter]|[parameter]|..]           Run debug code 1"
 	echo -e "\t$NAME_SCRIPT debug2 [parameter]|[parameter]|..]           Run debug code 2"
 }
@@ -753,12 +799,12 @@ function lock {
 		local foo=bar
 	else
 		if [ "$current_time" -gt "$max_time" ]; then
-			log_write "Maximum locked time reached"
+			log_write "general" "error" "Maximum locked time reached"
 			sleep $max_time
 			unlock
 			exit 1
 		fi
-		log_write "Sleep 1 second for locked state"
+		log_write "general" "info" "Sleep 1 second for locked state"
 		sleep 1
 		lock $current_time
 		return
@@ -807,7 +853,7 @@ function send_identifier {
 	fi
 	echo "$ID" > "$FILE_ID"
 
-	log_write "Send installation identifier to collect usage"
+	log_write "general" "info" "Send installation identifier to collect usage"
 
 	$CURL https://www.lejubila.net/statistic/collect_usage/piGarden/$ID/$VERSION/$SUB_VERSION/$RELEASE_VERSION > /dev/null 2>&1
 
@@ -835,6 +881,31 @@ function exec_reboot {
 	trigger_event "exec_reboot_after" 
 }
 
+#
+# Esegue un comando con piGardenSched
+#
+# $1	parametro 1 
+# $2	parametro 2 
+# $3	parametro 3 
+# $4	parametro 4 
+# $5	parametro 5 
+
+function cmd_pigardensched {
+	local foo="bar"
+
+	if [ $PIGARDENSCHED == 0 ]; then
+		echo "piGardenSched not configured in piGarden" >&2
+		log_write "piGardenSched" "error" "piGardenSched not configured in piGarden"
+		return
+	fi
+
+	$PIGARDENSCHED_PATH $1 $2 $3 $4 $5
+
+	if [ $? -ne 0 ]; then
+		echo "piGardenSched command failed"
+	fi
+}
+
 
 #
 # Converte da gradi a direzione
@@ -932,8 +1003,8 @@ function debug2 {
 }
 
 VERSION=0
-SUB_VERSION=5
-RELEASE_VERSION=12
+SUB_VERSION=6
+RELEASE_VERSION=2
 
 DIR_SCRIPT=`dirname $0`
 NAME_SCRIPT=${0##*/}
@@ -961,9 +1032,6 @@ fi
 . "$DIR_SCRIPT/include/rain.include.sh"
 . "$DIR_SCRIPT/include/events.include.sh"
 
-#LAST_INFO_FILE="$STATUS_DIR/last_info"
-#LAST_WARNING_FILE="$STATUS_DIR/last_warning"
-#LAST_SUCCESS_FILE="$STATUS_DIR/last_success"
 MESSAGE_INFO=""
 MESSAGE_WARNING=""
 MESSAGE_SUCCESS=""
@@ -987,6 +1055,11 @@ elif [ "$WEATHER_SERVICE" != "none" ]; then
 	WEATHER_SERVICE="drv:$WEATHER_SERVICE"
 fi
 
+PIGARDENSCHED="0"
+if [[ -x "$PIGARDENSCHED_PATH" ]]; then
+	PIGARDENSCHED="1"
+fi
+
 # Elimina il file di lock se più vecchio di 11 secondi
 if [ -f "$LOCK_FILE" ]; then
 	max_age_lock_file=11
@@ -1077,7 +1150,7 @@ case "$1" in
                 nohup $0 start_socket_server_daemon > /dev/null 2>&1 &
 
                 echo "Daemon is started widh pid $!"
-		log_write "start socket server with pid $!"
+		log_write "socket_server" "info" "start socket server with pid $!"
                 ;;
 
 	start_socket_server_daemon)
@@ -1159,6 +1232,10 @@ case "$1" in
 	get_cron_close)
 		get_cron_close $2
 		;;
+
+	cmd_pigardensched)
+		cmd_pigardensched $2 $3 $4 $5
+		;;
 	
 	reboot)
 		exec_reboot