Fix bug in single monostable solenodid management caused from wrong variable name EV_IS_MONOSTAVLE

CHANGELOG.md

@@ -1,3 +1,12 @@
+# 0.5.10 - 11/11/2018
+- Fix bug in single monostable solenodid management caused from wrong variable name EV_IS_MONOSTAVLE
+
+# 0.5.9 - 01/11/2018
+- Added mqtt support for publishing status to broker 
+
+# 0.5.8 - 19/07/2018
+- Added "openweathermap" driver for impement check weather condition from openweatermap api
+
 # 0.5.7 - 01/06/2018
 - Added "sonoff_tasmota_http" driver for interfacin with Sonoff module with Tasmota firmware over http protocol
 

conf/piGarden.conf.example

@@ -53,6 +53,11 @@ READLINK="/bin/readlink"
 # Percorso stat
 STAT="/usr/bin/stat"
 
+# Percorso mosquito_pub
+# # Installare con apt install mosquitto-clients
+MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
+
+
 # Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
 # se impostato a 0 il sistema gestirà elettrovalvole bisstabili
 EV_MONOSTABLE=0
@@ -107,9 +112,19 @@ EV5_GPIO=23   #		Physical 16 - wPi 4
 EV6_ALIAS="6" #
 EV6_GPIO=24   #		Physical 18 - wPi 5
 
-# Definisce l'api key e il luogo per recuperare lo stato meteo online
+
+# Definisci il servizio online da utilizzare per il controllo delle condizioni meteo, puoi scegliere openweathermap oppure wunderground
+WEATHER_SERVICE="openweathermap"
+
+# Parametri di openweathermap, definisce l'api key e il luogo per recuperare lo stato meteo online
+OPENWEATHERMAP_KEY=""
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it" # https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"	# Time zone
+
+# Parametri di wunderground, definisce l'api key e il luogo per recuperare lo stato meteo online
 WUNDERGROUND_KEY=""
-WUNDERGROUND_LOCATION="IY/Monsummano"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+WUNDERGROUND_LOCATION="IT/Pieve%20a%20Nievole"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+
 
 # Blocca l'irrigazione se l'ultima pioggia rilevata online è avvenuta nell'ultima quantità di tempo inserita.
 # Il tempo è espresso in secondi. Quindi inserendo 86400, se nelle ultime 24 ore ha piovuto viene bloccata l'irrigazione. Inserendo il valore zero non viene eseguito nessun controllo.
@@ -129,3 +144,12 @@ TCPSERVER_PWD=""
 # Con impostato il valore 1 non invia l'identificativi per statistiche di utilizzo
 NO_SEND_IDENTIFIER=0
 
+# Parametri connessione al broker mqtt
+MQTT_ENABLE=0	# set 1 to enable
+MQTT_HOST=you_host_mqtt
+MQTT_PORT=1883
+MQTT_USER=your_user_mqtt
+MQTT_PWD=yout_password_mqtt
+MQTT_TOPIC="pigarden/result"
+MQTT_CLIENT_ID=piGarden
+

conf/piGarden.conf.remote.example

@@ -53,6 +53,11 @@ READLINK="/bin/readlink"
 # Percorso stat
 STAT="/usr/bin/stat"
 
+# Percorso mosquito_pub
+# Installare con apt install mosquitto-clients
+MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
+
+
 # Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
 # se impostato a 0 il sistema gestirà elettrovalvole bisstabili
 EV_MONOSTABLE=0
@@ -100,11 +105,19 @@ EV4_ALIAS="Giardino_Posteriore_GPIO" #
 EV4_GPIO="18"
 
 
+# Definisci il servizio online da utilizzare per il controllo delle condizioni meteo, puoi scegliere openweathermap oppure wunderground
+WEATHER_SERVICE="openweathermap"
 
-# Definisce l'api key e il luogo per recuperare lo stato meteo online
+# Parametri di openweathermap, definisce l'api key e il luogo per recuperare lo stato meteo online
+OPENWEATHERMAP_KEY=""
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it" # https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"	# Time zone
+
+# Parametri di wunderground, definisce l'api key e il luogo per recuperare lo stato meteo online
 WUNDERGROUND_KEY=""
 WUNDERGROUND_LOCATION="IT/Pieve%20a%20Nievole"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
 
+
 # Blocca l'irrigazione se l'ultima pioggia rilevata online è avvenuta nell'ultima quantità di tempo inserita.
 # Il tempo è espresso in secondi. Quindi inserendo 86400, se nelle ultime 24 ore ha piovuto viene bloccata l'irrigazione. Inserendo il valore zero non viene eseguito nessun controllo.
 NOT_IRRIGATE_IF_RAIN_ONLINE=86400
@@ -123,6 +136,15 @@ TCPSERVER_PWD=""
 # Con impostato il valore 1 non invia l'identificativi per statistiche di utilizzo
 NO_SEND_IDENTIFIER=0
 
+# Parametri connessione al broker mqtt
+MQTT_ENABLE=0   # set 1 to enable
+MQTT_HOST=you_host_mqtt
+MQTT_PORT=1883
+MQTT_USER=your_user_mqtt
+MQTT_PWD=yout_password_mqtt
+MQTT_TOPIC="pigarden/result"
+MQTT_CLIENT_ID=piGarden
+
 
 #
 # Configurazione piGarden remoti

conf/piGarden.conf.sonoff_tasmota_http.example

@@ -53,6 +53,11 @@ READLINK="/bin/readlink"
 # Percorso stat
 STAT="/usr/bin/stat"
 
+# Percorso mosquito_pub
+# # Installare con apt install mosquitto-clients
+MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
+
+
 # Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
 # se impostato a 0 il sistema gestirà elettrovalvole bisstabili
 EV_MONOSTABLE=0
@@ -102,10 +107,19 @@ EV4_ALIAS="Giardino_Anteriore"
 EV4_GPIO="drv:sonoff_tasmota_http:SONOFF2:Power1"
 
 
-# Definisce l'api key e il luogo per recuperare lo stato meteo online
+# Definisci il servizio online da utilizzare per il controllo delle condizioni meteo, puoi scegliere openweathermap oppure wunderground
+WEATHER_SERVICE="openweathermap"
+
+# Parametri di openweathermap, definisce l'api key e il luogo per recuperare lo stato meteo online
+OPENWEATHERMAP_KEY=""
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it" # https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"	# Time zone
+
+# Parametri di wunderground, definisce l'api key e il luogo per recuperare lo stato meteo online
 WUNDERGROUND_KEY=""
 WUNDERGROUND_LOCATION="IT/Pieve%20a%20Nievole"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
 
+
 # Blocca l'irrigazione se l'ultima pioggia rilevata online è avvenuta nell'ultima quantità di tempo inserita.
 # Il tempo è espresso in secondi. Quindi inserendo 86400, se nelle ultime 24 ore ha piovuto viene bloccata l'irrigazione. Inserendo il valore zero non viene eseguito nessun controllo.
 NOT_IRRIGATE_IF_RAIN_ONLINE=86400
@@ -124,6 +138,15 @@ TCPSERVER_PWD=""
 # Con impostato il valore 1 non invia l'identificativi per statistiche di utilizzo
 NO_SEND_IDENTIFIER=0
 
+# Parametri connessione al broker mqtt
+MQTT_ENABLE=0   # set 1 to enable
+MQTT_HOST=you_host_mqtt
+MQTT_PORT=1883
+MQTT_USER=your_user_mqtt
+MQTT_PWD=yout_password_mqtt
+MQTT_TOPIC="pigarden/result"
+MQTT_CLIENT_ID=piGarden
+
 
 #
 # Configurazione moduli sonoff

conf/piGarden.conf.spb16ch.example

@@ -53,6 +53,11 @@ READLINK="/bin/readlink"
 # Percorso stat
 STAT="/usr/bin/stat"
 
+# Percorso mosquito_pub
+# Installare con apt install mosquitto-clients
+MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
+
+
 # Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
 # se impostato a 0 il sistema gestirà elettrovalvole bisstabili
 EV_MONOSTABLE=1
@@ -472,9 +477,18 @@ EV128_ALIAS="Zona_128" #
 EV128_GPIO="drv:spb16ch:128"
 
 
-# Definisce l'api key e il luogo per recuperare lo stato meteo online
+# Definisci il servizio online da utilizzare per il controllo delle condizioni meteo, puoi scegliere openweathermap oppure wunderground
+WEATHER_SERVICE="openweathermap"
+
+# Parametri di openweathermap, definisce l'api key e il luogo per recuperare lo stato meteo online
+OPENWEATHERMAP_KEY=""
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it" # https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"	# Time zone
+
+# Parametri di wunderground, definisce l'api key e il luogo per recuperare lo stato meteo online
 WUNDERGROUND_KEY=""
-WUNDERGROUND_LOCATION="IY/Monsummano"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+WUNDERGROUND_LOCATION="IT/Pieve%20a%20Nievole"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+
 
 # Blocca l'irrigazione se l'ultima pioggia rilevata online è avvenuta nell'ultima quantità di tempo inserita.
 # Il tempo è espresso in secondi. Quindi inserendo 86400, se nelle ultime 24 ore ha piovuto viene bloccata l'irrigazione. Inserendo il valore zero non viene eseguito nessun controllo.
@@ -494,6 +508,15 @@ TCPSERVER_PWD=""
 # Con impostato il valore 1 non invia l'identificativi per statistiche di utilizzo
 NO_SEND_IDENTIFIER=0
 
+# Parametri connessione al broker mqtt
+MQTT_ENABLE=0   # set 1 to enable
+MQTT_HOST=you_host_mqtt
+MQTT_PORT=1883
+MQTT_USER=your_user_mqtt
+MQTT_PWD=yout_password_mqtt
+MQTT_TOPIC="pigarden/result"
+MQTT_CLIENT_ID=piGarden
+
 
 #
 # Configurazione schede spb16ch

drv/openweathermap/README.md

@@ -0,0 +1,13 @@
+# Driver for check wather condition with openweathermap online service
+
+# Example of configuration in piGarden.conf
+
+```bash
+WEATHER_SERVICE="openweathermap"
+
+OPENWEATHERMAP_KEY="d4d22ea805788420267971135563b4cc" # Set with your api key of openweathermap
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it"    # Set with location identify, see https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"			      # Set with your time zone
+```
+
+

drv/openweathermap/common.include.sh

@@ -0,0 +1,123 @@
+#
+# Funzioni comuni utilizzate dal driver
+#
+
+#
+# Recupera la descrizione della condizione meteo
+#
+# $1 condizione meteo recuperata dalle api
+#
+function drv_openweathermap_get_wather {
+
+	declare -A w
+
+	w["thunderstorm with light rain"]="Thunderstorms and Rain"
+	w["thunderstorm with rain"]="Thunderstorms and Rain"
+	w["thunderstorm with heavy rain"]="Thunderstorms and Rain"
+	w["light thunderstorm"]="Thunderstorm"
+	w["thunderstorm"]="Thunderstorm"
+	w["heavy thunderstorm"]="Thunderstorm"
+	w["ragged thunderstorm"]="Thunderstorm"
+	w["thunderstorm with light drizzle"]="Thunderstorms and Rain"
+	w["thunderstorm with drizzle"]="Thunderstorms and Rain"
+	w["thunderstorm with heavy drizzle"]="Thunderstorms and Rain"
+
+	w["light intensity drizzle"]="Drizzle"
+	w["drizzle"]="Drizzle"
+	w["heavy intensity drizzle"]="Drizzle"
+	w["light intensity drizzle rain"]="Drizzle"
+	w["drizzle rain"]="Drizzle"
+	w["heavy intensity drizzle rain"]="Drizzle"
+	w["shower rain and drizzle"]="Drizzle"
+	w["heavy shower rain and drizzle"]="Drizzle"
+	w["shower drizzle"]="Drizzle"
+
+	w["light rain"]="Rain Mist"
+	w["moderate rain"]="Rain"
+	w["heavy intensity rain"]="Rain"
+	w["very heavy rain"]="Rain"
+	w["extreme rain"]="Rain"
+	w["freezing rain"]="Freezing Rain"
+	w["light intensity shower rain"]="Rain"
+	w["shower rain"]="Rain"
+	w["heavy intensity shower rain"]="Rain"
+	w["ragged shower rain"]="Rain"
+
+	w["light snow"]="Snow"
+	w["snow"]="Snow"
+	w["heavy snow"]=""
+	w["sleet"]="Snow Grains"
+	w["shower sleet"]="Snow Grains"
+	w["light rain and snow"]="Snow"
+	w["rain and snow"]="Snow"
+	w["light shower snow"]="Snow"
+	w["shower snow"]="Snow"
+	w["heavy shower snow"]="Snow"
+
+	w["mist"]="Mist"
+	w["smoke"]="Smoke"
+	w["haze"]="Haze"
+	w["sand, dust whirls"]="Dust Whirls"
+	w["fog"]="Fog"
+	w["sand"]="Sand"
+	w["dust"]="Widespread Dust"
+	w["volcanic ash"]="Volcanic Ash"
+	w["squalls"]="Squalls"
+	w["tornado"]="Tornado"
+
+	w["clear sky"]="Clear"
+
+	w["few clouds"]="Partly Cloudy"
+	w["scattered clouds"]="Scattered Clouds"
+	w["broken clouds"]="Partly Cloudy"
+	w["overcast clouds"]="Mostly Cloudy"
+
+	local weather=${w[$1]}
+
+	if [ -z "$weather" ]; then
+		weather="$1"
+	fi
+
+	echo $weather
+
+}																												    
+
+#
+# Recupera la l'icona rappresentativa delle condizione meteo
+#
+# $1 nome dell'icona recuperato delle api weather.icon
+#
+function drv_openweathermap_get_ico {
+
+	declare -A w
+
+	w["01d"]="http://icons.wxug.com/i/c/k/clear.gif"
+	w["01n"]="http://icons.wxug.com/i/c/k/nt_clear.gif"
+	w["02d"]="http://icons.wxug.com/i/c/k/partlycloudy.gif"
+	w["02n"]="http://icons.wxug.com/i/c/k/nt_partlycloudy.gif"
+	w["03d"]="http://icons.wxug.com/i/c/k/cloudy.gif"
+	w["03n"]="http://icons.wxug.com/i/c/k/nt_cloudy.gif"
+	w["04d"]="http://icons.wxug.com/i/c/k/cloudy.gif"
+	w["04n"]="http://icons.wxug.com/i/c/k/nt_cloudy.gif"
+	w["09d"]="http://icons.wxug.com/i/c/k/sleet.gif"
+	w["09n"]="http://icons.wxug.com/i/c/k/nt_sleet.gif"
+	w["10d"]="http://icons.wxug.com/i/c/k/rain.gif"
+	w["10n"]="http://icons.wxug.com/i/c/k/nt_rain.gif"
+	w["11d"]="http://icons.wxug.com/i/c/k/tstorms.gif"
+	w["11n"]="http://icons.wxug.com/i/c/k/nt_tstorms.gif"
+	w["13d"]="http://icons.wxug.com/i/c/k/snow.gif"
+	w["13n"]="http://icons.wxug.com/i/c/k/nt_snow.gif"
+	w["50d"]="http://icons.wxug.com/i/c/k/fog.gif"
+	w["50n"]="http://icons.wxug.com/i/c/k/nt_fog.gif"
+
+	local ico=${w[$1]}
+
+	if [ -z "$ico" ]; then
+		ico="$1"
+	fi
+
+	echo $ico
+
+}																												    
+
+

drv/openweathermap/rainonline.include.sh

@@ -0,0 +1,74 @@
+#
+# Ritorna lo stato delle condizioni meteo interrogando il servizio online 
+#
+# $i 	identificativo gpio del sensore di pioggia
+#
+# return output:	0  - errore durante il recupero delle condizioni meteo 
+#			>0 - rilevato pioggia, timestamp del rilevamento
+#			<0 - rilevato nessuna pioggia, timestamp del rilevamento
+function drv_openweathermap_rain_online_get {
+
+	# http://www.wunderground.com/weather/api/d/docs?d=resources/phrase-glossary&MR=1
+	$CURL "http://api.openweathermap.org/data/2.5/weather?$OPENWEATHERMAP_LOCATION&units=metric&appid=$OPENWEATHERMAP_KEY" > $TMP_PATH/check_rain_online.openweathermap.json
+	local weather=`cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -M ".weather[0].main"`
+
+	local wind_deg=$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".wind.deg")
+	local wind_speed=$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".wind.speed")
+	if [ "$wind_speed" == "null" ]; then
+		#wind_speed=$($JQ -n $wind_speed*3600/1000)
+		wind_speed=0
+	fi
+
+
+	local weather="$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".weather[0].description")"
+	local ico=$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".weather[0].icon")
+	weather=$(drv_openweathermap_get_wather "$weather")
+	ico=$(drv_openweathermap_get_ico "$ico")
+
+	local current_observation=$(cat <<EOF
+{
+  "display_location": {
+    "city": "$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".name")"
+  },
+  "observation_epoch": "$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".dt")",
+  "local_epoch": "$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".dt")",
+  "local_tz_long": "$OPENWEATHERMAP_TZ",
+  "weather": "$weather",
+  "temp_c": $(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".main.temp"),
+  "relative_humidity": "$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".main.humidity")%",
+  "wind_dir": "$(deg2dir $wind_deg)",
+  "wind_degrees": $wind_deg,
+  "wind_kph": $wind_speed,
+  "wind_gust_kph": "--",
+  "pressure_mb": "$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".main.pressure")",
+  "dewpoint_c": "--",
+  "feelslike_c": "--",
+  "icon_url": "$ico"
+}
+EOF
+)
+#  "icon_url": "http://openweathermap.org/img/w/$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".weather[0].icon").png"
+
+	#local current_observation=`cat $TMP_PATH/check_rain_online.json | $JQ -M ".current_observation"`
+
+	if [ "$weather" = "null" ]; then
+		echo "0"
+	else
+		echo "$current_observation" > "$STATUS_DIR/last_weather_online"
+		local local_epoch=`cat $STATUS_DIR/last_weather_online | $JQ -M -r ".local_epoch"`
+		if 	[[ "$weather" == *"Rain"* ]] || 
+		 	[[ "$weather" == *"Snow"* ]] || 
+	 		[[ "$weather" == *"Hail"* ]] || 
+			[[ "$weather" == *"Ice"* ]] || 
+			[[ "$weather" == *"Thunderstorm"* ]] || 
+			[[ "$weather" == *"Drizzle"* ]]; 
+		then
+			echo $local_epoch
+		else
+			echo "-$local_epoch"
+		fi
+	fi
+
+}
+
+

drv/remote/README.md

@@ -3,7 +3,7 @@
 For more information see https://www.lejubila.net/2018/03/pigardent-0-5-5-driver-master-per-implementare-un-architettura-master-slave/
 
 # Example of zone configuration in piGarden.conf
-
+```bash
 EV1_ALIAS="Giarino_Posteriore_DX" #
 EV1_GPIO="drv:remote:PIREMOTE1:Giardino_Posteriore_DX"
 
@@ -11,3 +11,4 @@ PIREMOTE1_IP="192.168.1.51"
 PIREMOTE1_PORT="8084"
 PIREMOTE1_USER=""
 PIREMOTE1_PWD=""
+```

drv/sample/rainonline.include.sh

@@ -0,0 +1,13 @@
+#
+# Ritorna lo stato delle condizioni meteo interrogando il servizio online 
+#
+# return output:	0  - errore durante il recupero delle condizioni meteo 
+#			>0 - rilevato pioggia, timestamp del rilevamento
+#			<0 - rilevato nessuna pioggia, timestamp del rilevamento
+function drv_sample_rain_online_get {
+
+	local FOO="bar"
+
+}
+
+

drv/sonoff_tasmota_http/README.md

@@ -5,6 +5,7 @@ More information on Sonoff Tasmota firmware: https://github.com/arendst/Sonoff-T
 
 # Example of zone configuration in piGarden.conf
 
+```bash
 EV1_ALIAS="Giardino_Posteriore_DX"
 EV1_GPIO="drv:sonoff_tasmota_http:SONOFF1:Power1"
 EV1_MONOSTABLE=1
@@ -16,6 +17,6 @@ EV2_MONOSTABLE=1
 SONOFF1_IP="192.168.1.1"
 SONOFF1_USER="user"
 SONOFF1_PWD="pwd"
-
+```
 More information for configuration: https://www.lejubila.net/2018/06/pigarden-0-5-7-gestisci-le-tue-elettrovalvole-con-i-moduli-sonoff-grazie-al-nuovo-driver-sonoff_tasmota_http
 

drv/wunderground/README.md

@@ -0,0 +1,12 @@
+# Driver for check wather condition with wunderground online service
+
+# Example of configuration in piGarden.conf
+
+```bash
+WEATHER_SERVICE="wunderground"
+
+WUNDERGROUND_KEY=""			# Set with your api key of wunderground
+WUNDERGROUND_LOCATION="IY/Monsummano"	# Set with your location indentify, see http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1 
+```
+
+

drv/wunderground/common.include.sh

@@ -0,0 +1,12 @@
+#
+# Funzioni comuni utilizzate dal driver
+#
+
+#
+# Funzione di esempio
+#
+function sample_foo {
+
+	echo "bar"
+
+}

drv/wunderground/rainonline.include.sh

@@ -0,0 +1,36 @@
+#
+# Ritorna lo stato delle condizioni meteo interrogando il servizio online 
+#
+# $i 	identificativo gpio del sensore di pioggia
+#
+# return output:	0  - errore durante il recupero delle condizioni meteo 
+#			>0 - rilevato pioggia, timestamp del rilevamento
+#			<0 - rilevato nessuna pioggia, timestamp del rilevamento
+function drv_wunderground_rain_online_get {
+
+	# http://www.wunderground.com/weather/api/d/docs?d=resources/phrase-glossary&MR=1
+	$CURL http://api.wunderground.com/api/$WUNDERGROUND_KEY/conditions/q/$WUNDERGROUND_LOCATION.json > $TMP_PATH/check_rain_online.json
+	local weather=`cat $TMP_PATH/check_rain_online.json | $JQ -M ".current_observation.weather"`
+	local current_observation=`cat $TMP_PATH/check_rain_online.json | $JQ -M ".current_observation"`
+	local local_epoch=`cat $TMP_PATH/check_rain_online.json | $JQ -M -r ".current_observation.local_epoch"`
+
+	if [ "$weather" = "null" ]; then
+		echo "0"
+	else
+		if 	[[ "$weather" == *"Rain"* ]] || 
+		 	[[ "$weather" == *"Snow"* ]] || 
+	 		[[ "$weather" == *"Hail"* ]] || 
+			[[ "$weather" == *"Ice"* ]] || 
+			[[ "$weather" == *"Thunderstorm"* ]] || 
+			[[ "$weather" == *"Drizzle"* ]]; 
+		then
+			echo $local_epoch
+		else
+			echo "-$local_epoch"
+		fi
+		echo "$current_observation" > "$STATUS_DIR/last_weather_online"
+	fi
+
+}
+
+

include/drv.include.sh

@@ -19,7 +19,7 @@ function setup_drv {
         done
 
 	# Inizializza i driver per gli altri gpio
-	for gpio in "$SUPPLY_GPIO_1" "$SUPPLY_GPIO_2" "$RAIN_GPIO"
+	for gpio in "$SUPPLY_GPIO_1" "$SUPPLY_GPIO_2" "$RAIN_GPIO" "$WEATHER_SERVICE"
 	do
 		if [[ "$gpio" == drv:* ]]; then
 			local drv=`echo $gpio | $CUT -d':' -f2,2`
@@ -32,7 +32,7 @@ function setup_drv {
 	local file_drv
 	for drv in "${list_drv[@]}"
 	do
-		for callback in config common init rele supply rainsensor setup
+		for callback in config common init rele supply rainsensor rainonline setup
 		do
 			file_drv="$DIR_SCRIPT/drv/$drv/$callback.include.sh"
 			if [ -f "$file_drv" ]; then
@@ -315,3 +315,30 @@ function drv_rain_sensor_get {
 	echo "$vret"
 
 }
+
+#
+# Legge lo stato le condizioni meteo dal servizio online
+#
+# $1	identificativo gpio sensore pioggia
+#
+function drv_rain_online_get {
+	local idx="$1"
+	local fnc=`get_driver_callback "rain_online_get" "$idx"`
+	local vret=""
+
+	# Nessun driver definito, esegue la lettura del sensore tramite gpio del raspberry
+	if [ -z "$fnc" ]; then
+	        log_write "Driver not found: $idx"
+        	message_write "warning" "Driver not found: $idx"
+	# Il driver definito non è stato trovato
+	elif [ "$fnc" == "drvnotfound" ]; then
+	        log_write "Driver not found: $idx"
+        	message_write "warning" "Driver not found: $idx"
+	else
+		echo "$(date) $fnc arg:$idx" >> "$LOG_OUTPUT_DRV_FILE"
+		vret=`$fnc "$idx"`
+	fi
+
+	echo "$vret"
+
+}

include/events.include.sh

@@ -17,12 +17,14 @@ function trigger_event {
 				case "$EVENT" in
 					"ev_open_before" | "ev_open_after")
 						ALIAS="$2"
+						CURRENT_EVENT_ALIAS="$ALIAS"
 						FORCE="$3"
 						$f "$EVENT" "$ALIAS" "$FORCE" `date +%s`  &> /dev/null 
 						;;
 
 					"ev_open_in_before")
 						ALIAS="$2"
+						CURRENT_EVENT_ALIAS="$ALIAS"
 						FORCE="$3"
 						local MINUTE_START="$4"
 						local MINUTE_STOP="$5"
@@ -31,6 +33,7 @@ function trigger_event {
 
 					"ev_open_in_after")
 						ALIAS="$2"
+						CURRENT_EVENT_ALIAS="$ALIAS"
 						FORCE="$3"
 						local CRON_START="$4"
 						local CRON_STOP="$5"
@@ -39,6 +42,7 @@ function trigger_event {
 
 					"ev_close_before" | "ev_close_after")
 						ALIAS="$2"
+						CURRENT_EVENT_ALIAS="$ALIAS"
 						$f "$EVENT" "$ALIAS" `date +%s`  &> /dev/null 
 						;;
 
@@ -89,6 +93,10 @@ function trigger_event {
 
 				local ec=$?
 				#echo "$EVENT ec=$ec" >> /tmp/piGarden.testevent
+
+				CURRENT_EVENT="$EVENT"
+				mqtt_status &
+
 				if [ $ec -ne 0 ]; then
 					log_write "Stop events chain for exit code $ec in $current_event_dir/$f"
 					return $ec

include/rain.include.sh

@@ -1,7 +1,7 @@
 #
 # Controlla se se piove tramite http://api.wunderground.com/
 #
-function check_rain_online {
+function check_rain_online_old {
 
 	trigger_event "check_rain_online_before" ""
 
@@ -42,6 +42,55 @@ function check_rain_online {
 	trigger_event "check_rain_online_after" "$current_state_rain_online" "$weather"
 }
 
+
+
+
+
+
+
+
+
+
+#
+# Controlla se se piove tramite http://api.wunderground.com/
+#
+function check_rain_online {
+
+	trigger_event "check_rain_online_before" ""
+
+	local local_epoch=`drv_rain_online_get $WEATHER_SERVICE`
+	local current_state_rain_online=""
+	local last_state_rain_online=`cat "$STATUS_DIR/last_state_rain_online" 2> /dev/null`
+	local weather="null"
+
+	if [[ $local_epoch =~ ^-?[0-9]+$ ]]; then
+		if [ $local_epoch -eq 0 ]; then
+			log_write "check_rain_online - failed read online data"
+		else
+			if [ $local_epoch -gt 0 ]; then
+				current_state_rain_online='rain'
+				echo $local_epoch > "$STATUS_DIR/last_rain_online"
+			else
+				current_state_rain_online='norain'
+			fi
+			weather=$(cat "$STATUS_DIR/last_weather_online" | $JQ -M ".weather")
+			
+			log_write "check_rain_online - weather=$weather, local_epoch=$local_epoch"
+			if [ "$current_state_rain_online" != "$last_state_rain_online" ]; then
+				echo "$current_state_rain_online" > "$STATUS_DIR/last_state_rain_online"
+				trigger_event "check_rain_online_change" "$current_state_rain_online" "$weather"
+			fi
+		fi
+	else
+		log_write "check_rain_online - failed read online data"
+	fi
+
+	trigger_event "check_rain_online_after" "$current_state_rain_online" "$weather"
+}
+
+
+
+
 #
 # Controlla se se piove tramite sensore
 #

include/socket.include.sh

@@ -63,7 +63,7 @@ function socket_server_command {
 
 	log_write "socket connection from: $TCPREMOTEIP - command: $arg1 $arg2 $arg3 $arg4 $arg5 $arg6 $arg7 $arg8"
 	
-	reset_messages &> /dev/null
+	#reset_messages &> /dev/null
 
 	case "$arg1" in
         	status)
@@ -225,7 +225,7 @@ function socket_server_command {
 
 	esac
 	
-	reset_messages &> /dev/null
+	#reset_messages &> /dev/null
 
 }
 

piGarden.sh

@@ -63,7 +63,7 @@ function initialize {
 #
 # Elimina i file contenente i messaggi da inserire nel json status
 #
-function reset_messages {
+function reset_messages_old {
 	rm -f "$LAST_INFO_FILE.$!"
 	rm -f "$LAST_WARNING_FILE.$!"
 	rm -f "$LAST_SUCCESS_FILE.$!"
@@ -85,8 +85,8 @@ function ev_open {
 	local EVNORAIN=`ev_number2norain $EVNUM`
 	local EV_IS_REMOTE_VAR=EV"$EVNUM"_REMOTE
 	local EV_IS_REMOTE=${!EV_IS_REMOTE_VAR}
-	local EV_IS_MONOSTAVLE_VAR=EV"$EVNUM"_MONOSTABLE
-	local EV_IS_MONOSTAVLE=${!EV_IS_MONOSTAVLE_VAR}
+	local EV_IS_MONOSTABLE_VAR=EV"$EVNUM"_MONOSTABLE
+	local EV_IS_MONOSTABLE=${!EV_IS_MONOSTAVLE_VAR}
 
 	if [ ! "$2" = "force" ] && [ "$EVNORAIN" != "1" ]; then
 		if [[ "$NOT_IRRIGATE_IF_RAIN_ONLINE" -gt 0 && -f $STATUS_DIR/last_rain_online ]]; then
@@ -95,10 +95,10 @@ function ev_open {
 			local dif=0
 			let "dif = now - last_rain"
 			if [ $dif -lt $NOT_IRRIGATE_IF_RAIN_ONLINE ]; then
+				message_write "warning" "Solenoid not open for rain"
 				trigger_event "ev_not_open_for_rain_online" "$1" 
 				trigger_event "ev_not_open_for_rain" "$1" 
 				log_write "Solenoid '$1' not open for rain (online check)"
-				message_write "warning" "Solenoid not open for rain"
 				return
 			fi
 		fi
@@ -110,10 +110,10 @@ function ev_open {
 			local dif=0
 			let "dif = now - last_rain"
 			if [ $dif -lt $NOT_IRRIGATE_IF_RAIN_SENSOR ]; then
+				message_write "warning" "Solenoid not open for rain"
 				trigger_event "ev_not_open_for_rain_sensor" "$1" 
 				trigger_event "ev_not_open_for_rain" "$1" 
 				log_write "Solenoid '$1' not open for rain (sensor check)"
-				message_write "warning" "Solenoid not open for rain"
 				return
 			fi
 		fi
@@ -128,6 +128,7 @@ function ev_open {
 	if [ $? -ne 0 ]; then
 		log_write "Solenoid '$1' not open due to external event"
 		message_write 'warning' "Solenoid not open due to external event"
+		mqtt_status
 		return
 	fi
 
@@ -149,12 +150,12 @@ function ev_open {
 
 	ev_set_state $EVNUM $state
 
+	log_write "Solenoid '$1' open"
+	message_write "success" "Solenoid open"
+
 	trigger_event "ev_open_after" "$1" "$2"
 
 	unlock
-
-	log_write "Solenoid '$1' open"
-	message_write "success" "Solenoid open"
 }
 
 #
@@ -175,21 +176,25 @@ function ev_open_in {
 	if ! [[ $minute_start =~ $re ]] ; then
 		echo -e "Time start of irrigation is wrong or not specified"
 		message_write "warning" "Time start of irrigation is wrong or not specified"
+		mqtt_status
 		return 1
 	fi
 	if ! [[ $minute_stop =~ $re ]] ; then
 		echo -e "Time stop of irrigation is wrong or not specified"
 		message_write "warning" "Time stop of irrigation is wrong or not specified"
+		mqtt_status
 		return 1
 	fi
 	if [ $minute_stop -lt "1" ] ; then
 		echo -e "Time stop of irrigation is wrong"
 		message_write "warning" "Time stop of irrigation is wrong"
+		mqtt_status
 		return 1
 	fi
 	if [ "empty$alias" == "empty" ]; then
 		echo -e "Alias solenoid not specified"
 		message_write "warning" "Alias solenoid not specified"
+		mqtt_status
 		return 1
 	fi
 
@@ -257,13 +262,13 @@ function ev_close {
 
 	ev_set_state $EVNUM 0
 
+	log_write "Solenoid '$1' close"
+	message_write "success" "Solenoid close"
+
 	trigger_event "ev_close_after" "$1"
 
 	unlock
 
-	log_write "Solenoid '$1' close"
-	message_write "success" "Solenoid close"
-
 	cron_del open_in_stop $1 > /dev/null 2>&1
 }
 
@@ -303,6 +308,20 @@ function log_write {
 # $2 messaggio
 #
 function message_write {
+	local file_message=""
+	if [ "$1" = 'info' ]; then
+		MESSAGE_INFO="$2"
+	elif [ "$1" = "warning" ]; then
+		MESSAGE_WARNING="$2"
+	elif [ "$1" = "success" ]; then
+		MESSAGE_SUCCESS="$2"
+	else
+		return
+	fi
+	
+}
+
+function message_write_old {
 	local file_message=""
 	if [ "$1" = 'info' ]; then
 		file_message="$LAST_INFO_FILE.$!"
@@ -351,6 +370,7 @@ function gpio_alias2number {
 
 	log_write "ERROR solenoid alias not found: $1"
 	message_write "warning" "Solenoid alias not found"
+	mqtt_status
 	exit 1
 }
 
@@ -370,6 +390,7 @@ function ev_alias2number {
 
 	log_write "ERROR solenoid alias not found: $1"
 	message_write "warning" "Solenoid alias not found"
+	mqtt_status
 	exit 1
 }
 
@@ -492,6 +513,12 @@ function json_status {
 	local last_success=""
 	local with_get_cron="0"
 	local with_get_cron_open_in="0"
+	local current_pid=$!
+	local json_event="\"event\": {\"event\": \"$CURRENT_EVENT\", \"alias\": \"$CURRENT_EVENT_ALIAS\"}"
+
+	if [ "$PARENT_PID" -gt "0" ]; then
+		current_pid=$PARENT_PID
+	fi
 
 	local vret=""
 	for i in $1 $2 $3 $4 $5 $6
@@ -516,7 +543,8 @@ function json_status {
 		if [ -n "$json" ]; then
 			json="$json,"
 		fi
-		json="$json\"$i\":{\"name\":\"$av\",\"state\":$sv}"
+		#json="$json\"$i\":{\"name\":\"$av\",\"state\":$sv}"
+		json="$json\"$av\":{\"name\":\"$av\",\"state\":$sv}"
 	done
 	json="\"zones\":{$json}"
 
@@ -527,15 +555,18 @@ function json_status {
 	if [[ ! -z "$last_weather_online" ]]; then
 		json_last_weather_online=$last_weather_online
 	fi
-	if [ -f "$LAST_INFO_FILE.$!" ]; then
-		last_info=`cat "$LAST_INFO_FILE.$!"`
-	fi
-	if [ -f "$LAST_WARNING_FILE.$!" ]; then
-		last_warning=`cat "$LAST_WARNING_FILE.$!"`
-	fi
-	if [ -f "$LAST_SUCCESS_FILE.$!" ]; then
-		last_success=`cat "$LAST_SUCCESS_FILE.$!"`
-	fi
+	#if [ -f "$LAST_INFO_FILE.$current_pid" ]; then
+	#	last_info=`cat "$LAST_INFO_FILE.$current_pid"`
+	#fi
+	#if [ -f "$LAST_WARNING_FILE.$current_pid" ]; then
+	#	last_warning=`cat "$LAST_WARNING_FILE.$current_pid"`
+	#fi
+	#if [ -f "$LAST_SUCCESS_FILE.$current_pid" ]; then
+	#	last_success=`cat "$LAST_SUCCESS_FILE.$current_pid"`
+	#fi
+	last_info="$MESSAGE_INFO"
+	last_warning="$MESSAGE_WARNING"
+	last_success="$MESSAGE_SUCCESS"
 	local json_last_weather_online="\"last_weather_online\":$json_last_weather_online"
 	local json_last_rain_sensor="\"last_rain_sensor\":\"$last_rain_sensor\""
 	local json_last_rain_online="\"last_rain_online\":\"$last_rain_online\""
@@ -607,9 +638,10 @@ function json_status {
 
 		json_get_cron_open_in="\"open_in\": {$values_open_in},\"open_in_stop\": {$values_open_in_stop}"
 	fi
-	local json_cron_open_in="\"cron_open_in\":{$json_get_cron_open_in}"			
+	local json_cron_open_in="\"cron_open_in\":{$json_get_cron_open_in}"
+	local json_timestamp="\"timestamp\": $(date +%s)"
 
-	json="{$json_version,$json,$json_last_weather_online,$json_error,$json_last_info,$json_last_warning,$json_last_success,$json_last_rain_online,$json_last_rain_sensor,$json_cron,$json_cron_open_in}"
+	json="{$json_version,$json_timestamp,$json_event,$json,$json_last_weather_online,$json_error,$json_last_info,$json_last_warning,$json_last_success,$json_last_rain_online,$json_last_rain_sensor,$json_cron,$json_cron_open_in}"
 
 	echo "$json"
 
@@ -617,6 +649,26 @@ function json_status {
 
 }
 
+#
+# Invia al broker mqtt il json contentente lo stato del sistema
+#
+# $1 parent pid (opzionale)
+#
+function mqtt_status {
+
+	if [ ! $MQTT_ENABLE -eq 1 ]; then
+		return
+	fi
+
+	if [ ! -z "$1" ]; then
+		PARENT_PID=$1
+	fi
+
+	local js=$(json_status)
+	$MOSQUITTO_PUB -h $MQTT_HOST -p $MQTT_PORT -u $MQTT_USER -P $MQTT_PWD -i $MQTT_CLIENT_ID -r -t "$MQTT_TOPIC" -m "$js"
+}
+
+
 #
 # Mostra il i parametri dello script
 #
@@ -632,6 +684,7 @@ function show_usage {
 	echo -e "\t$NAME_SCRIPT ev_status alias                              show status solenoid"
 	echo -e "\t$NAME_SCRIPT ev_status_all                                show status solenoids"
 	echo -e "\t$NAME_SCRIPT json_status [get_cron|get_cron_open_in]      show status in json format"
+	echo -e "\t$NAME_SCRIPT mqtt_status                                  send status in json format to mqtt broker"
 	echo -e "\t$NAME_SCRIPT check_rain_online                            check rain from http://api.wunderground.com/"
 	echo -e "\t$NAME_SCRIPT check_rain_sensor                            check rain from hardware sensor"
 	echo -e "\t$NAME_SCRIPT close_all_for_rain                           close all solenoid if it's raining"
@@ -782,6 +835,94 @@ function exec_reboot {
 	trigger_event "exec_reboot_after" 
 }
 
+
+#
+# Converte da gradi a direzione
+#
+# $1 gradi
+#
+function deg2dir {
+	local deg=$(echo $1 | $SED 's/\..*$//')
+	local dir=""
+
+	if [ "$deg" == "null" ]; then
+		echo ""
+		return
+	fi
+
+	# N	348.75 - 11.25
+	if [ $deg -le 11 ]; then
+		dir="North"
+
+	# NNE	11.25 - 33.75
+	elif [ $deg -le 33 ]; then
+		dir="NNE"
+
+	# NE	33.75 - 56.25
+	elif [ $deg -le 56 ]; then
+		dir="NE"
+
+	# ENE	56.25 - 78.75
+	elif [ $deg -le 78 ]; then
+		dir="ENE"
+
+	# E	78.75 - 101.25
+	elif [ $deg -le 101 ]; then
+		dir="East"
+
+	# ESE	101.25 - 123.75
+	elif [ $deg -le 123 ]; then
+		dir="ESE"
+
+	# SE	123.75 - 146.25
+	elif [ $deg -le 146 ]; then
+		dir="SE"
+
+	# SSE	146.25 - 168.75
+	elif [ $deg -le 168 ]; then
+		dir="SSE"
+
+	# S	168.75 - 191.25
+	elif [ $deg -le 191 ]; then
+		dir="South"
+
+	# SSW	191.25 - 213.75
+	elif [ $deg -le 213 ]; then
+		dir="SSW"
+
+	# SW	213.75 - 236.25
+	elif [ $deg -le 236 ]; then
+		dir="SW"
+
+	# WSW	236.25 - 258.75
+	elif [ $deg -le 258 ]; then
+		dir="WSW"
+
+	# W	258.75 - 281.25
+	elif [ $deg -le 281 ]; then
+		dir="West"
+
+	# WNW	281.25 - 303.75
+	elif [ $deg -le 303 ]; then
+		dir="WNW"
+
+	# NW	303.75 - 326.25
+	elif [ $deg -le 326 ]; then
+		dir="NW"
+
+	# NNW	326.25 - 348.75
+	elif [ $deg -le 348 ]; then
+		dir="NNW"
+
+	# N	348.75 - 11.25
+	else
+		dir="North"
+	fi
+
+	echo $dir
+
+}
+
 function debug1 {
 	. "$DIR_SCRIPT/debug/debug1.sh"	
 }
@@ -792,7 +933,7 @@ function debug2 {
 
 VERSION=0
 SUB_VERSION=5
-RELEASE_VERSION=7
+RELEASE_VERSION=10
 
 DIR_SCRIPT=`dirname $0`
 NAME_SCRIPT=${0##*/}
@@ -820,9 +961,17 @@ fi
 . "$DIR_SCRIPT/include/rain.include.sh"
 . "$DIR_SCRIPT/include/events.include.sh"
 
-LAST_INFO_FILE="$STATUS_DIR/last_info"
-LAST_WARNING_FILE="$STATUS_DIR/last_warning"
-LAST_SUCCESS_FILE="$STATUS_DIR/last_success"
+#LAST_INFO_FILE="$STATUS_DIR/last_info"
+#LAST_WARNING_FILE="$STATUS_DIR/last_warning"
+#LAST_SUCCESS_FILE="$STATUS_DIR/last_success"
+MESSAGE_INFO=""
+MESSAGE_WARNING=""
+MESSAGE_SUCCESS=""
+
+CURRENT_EVENT=""
+CURRENT_EVENT_ALIAS=""
+
+PARENT_PID=0
 
 if [ -z $LOG_OUTPUT_DRV_FILE ]; then
 	LOG_OUTPUT_DRV_FILE="/dev/null"
@@ -832,6 +981,11 @@ if [ -z "$EVENT_DIR" ]; then
 	EVENT_DIR="$DIR_SCRIPT/events"
 fi
 
+if [ -z $WEATHER_SERVICE ]; then
+	WEATHER_SERVICE="drv:wunderground"
+else
+	WEATHER_SERVICE="drv:$WEATHER_SERVICE"
+fi
 
 # Elimina il file di lock se più vecchio di 11 secondi
 if [ -f "$LOCK_FILE" ]; then
@@ -888,6 +1042,10 @@ case "$1" in
 		json_status $2 $3 $4 $5 $6
 		;;
 
+	mqtt_status)
+		mqtt_status $2
+		;;
+
 	check_rain_online)
 		check_rain_online
 		;;
@@ -1029,4 +1187,4 @@ esac
 rm "$TMP_CRON_FILE" 2> /dev/null
 rm "$TMP_CRON_FILE-2" 2> /dev/null
 
-reset_messages &> /dev/null
+#reset_messages &> /dev/null