Change number of version

- Update rainsensorqty driver to version 0.2.5b

CHANGELOG.md

@@ -1,3 +1,61 @@
+# 0.6.1 - 06/09/2020
+- Add support for send log to piGardenWeb
+
+# 0.6.0 - 16/05/2020
+- Add support for enable all cron fron api
+- Update rainsensorqty driver to version 0.2.5b
+
+# 0.5.14 - 24/09/2019
+- Updated rainsensorqty driver to version 0.2.3 
+- Added api and command for manage piGardenSched scheduling
+
+# 0.5.13 - 12/08/2019
+- Added driver rainsensorqty for menage rainfall detection based on quantity
+
+# 0.5.12.1 - 23/06/2019
+- Added zip log drver file when exceeding the size limit
+
+# 0.5.12 - 13/11/2018
+- Fixed a bug that prevented the publication of the mqtt topic for each event
+- Fixed a bug on openweathermap driver which in some cases causes a malformation of the json status and prevented communication with piGardenWeb 
+
+# 0.5.11 - 11/11/2018
+- Added ability to disable online weather service by defining WEATHER_SERVICE="none" in the configuration file
+
+# 0.5.10 - 11/11/2018
+- Fix bug in single monostable solenodid management caused from wrong variable name EV_IS_MONOSTAVLE
+
+# 0.5.9 - 01/11/2018
+- Added mqtt support for publishing status to broker 
+
+# 0.5.8 - 19/07/2018
+- Added "openweathermap" driver for impement check weather condition from openweatermap api
+
+# 0.5.7 - 01/06/2018
+- Added "sonoff_tasmota_http" driver for interfacin with Sonoff module with Tasmota firmware over http protocol
+
+# 0.5.6 - 04/05/2018
+- Added events ev_not_open_for_rain, ev_not_open_for_rain_sensor, ev_not_open_for_rain_online
+- Added script rpinotify.sh for notificate events to telegram
+
+# 0.5.5 - 25/03/2018
+- Added "remote" driver to control remote pigarden
+
+# 0.5.4 - 13/11/2017
+- Fix bad initialization LOG_OUTPUT_DRV_FILE variable if not defined in config file
+
+# 0.5.3 - 19/11/2017
+- Fix send parameter on event init_before and init_after
+- Added WEATHER argument in check_rain_sensor_after and check_rain_sensor_change event
+- Added events cron_add_before, cron_add_after, cron_del_before, cron_del_after, ev_open_in_before, ev_open_in_after, exec_poweroff_before, exec_poweroff_after, exec_reboot_before, exec_reboot_after
+- Added to sendmail.sh argument passed form check_rain_sensor_after and check_rain_sensor_change event
+- Added to sendmail.sh new events
+- Fix wrong state on event script sendmail.sh
+
+# 0.5.2 - 01/11/2017
+- Fix problem inconsistent return value in drv_rain_sensor_get
+- Fix get parameter in event script sendmail.sh
+
 # 0.5.1 - 28/10/2017
 - Added events managemets
 - Added support for zones not subject to rainfall (with parameter EVx_NORAIN)

README.md

@@ -4,7 +4,7 @@ Bash script to manage an irrigation system built with a Raspberry Pi
 
 ## Official documentation 
 
-Documentation of piGarden and build system irrigation with Raspberry Pi can be found on the [www.lejubila.net/tag/pigarden/](http://www.lejubila.net/tag/pigarden/)
+Documentation of piGarden and build system irrigation with Raspberry Pi can be found on the [www.lejubila.net/pigarden/](http://www.lejubila.net/pigarden/)
 
 ## License
 
@@ -41,8 +41,8 @@ sudo make install
 
 ``` bash
 cd
-git clone git://git.drogon.net/wiringPi
+git clone https://github.com/WiringPi/WiringPi.git
-cd wiringPi
+cd WiringPi
 git pull origin 
 ./build
 ```
@@ -66,5 +66,3 @@ sudo cp piGarden/conf/piGarden.conf.example /etc/piGarden.conf
 Customize the configuration file. 
 For more information see 
 [www.lejubila.net/2015/12/impianto-di-irrigazione-con-raspberry-pi-pigarden-lo-script-di-gestione-quinta-parte/](https://www.lejubila.net/2015/12/impianto-di-irrigazione-con-raspberry-pi-pigarden-lo-script-di-gestione-quinta-parte/)
-and
-[www.lejubila.net/2017/04/pigarden-0-2-easter-egg/](https://www.lejubila.net/2017/04/pigarden-0-2-easter-egg/)

conf/piGarden.conf.example

@@ -2,6 +2,14 @@
 LOG_FILE="/home/pi/piGarden/log/piGarden.log"
 LOG_FILE_MAX_SIZE=1048576 # 1MB
 
+#
+# Enable send log to piGardenWeb
+#
+
+#LOG_URL="http://url_of_your_pigardenweb/api/log"
+#LOG_API_TOKEN="token_of_pigardenweb_user"
+#LOG_CURL_PARAM="--data-urlencode -k"
+
 # Log file for driver output
 LOG_OUTPUT_DRV_FILE="/tmp/piGarden.drv.log"
 
@@ -53,8 +61,16 @@ READLINK="/bin/readlink"
 # Percorso stat
 STAT="/usr/bin/stat"
 
+# Percorso mosquito_pub
+# # Installare con apt install mosquitto-clients
+MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
+
+# Percorso di piGardenSched, se non definito non verranno gestire le schedulazioni di piGardenSched tramite api
+#PIGARDENSCHED_PATH="/home/pi/piGardenSched/piGardenSched.sh"
+
+
 # Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
-# se impostato a 0 il sistema gestirà elettrovalvole bisstabili
+# se impostato a 0 il sistema gestirà elettrovalvole bistabili
 EV_MONOSTABLE=0
 
 # Id gpio usati per simulare il doppio deviatore con cui eseguire l'alimentazione alle elettrovalvole
@@ -90,6 +106,7 @@ EV_TOTAL=6
 EV1_ALIAS="1" #
 EV1_GPIO=17   #		Physical 11 - wPi 0
 #EV1_NORAIN=1 # 	Non interrompe l'irrigazione di questa zona in caso di pioggia
+#EV1_MONOSTABLE=1 #	L'elettrovalvola è monostabile
 
 EV2_ALIAS="2" #
 EV2_GPIO=27   #		Physical 13 - wPi 2
@@ -106,9 +123,21 @@ EV5_GPIO=23   #		Physical 16 - wPi 4
 EV6_ALIAS="6" #
 EV6_GPIO=24   #		Physical 18 - wPi 5
 
-# Definisce l'api key e il luogo per recuperare lo stato meteo online
+
+# Definisci il servizio online da utilizzare per il controllo delle condizioni meteo, puoi scegliere openweathermap oppure wunderground.
+# Se non vuoi configurare nessun servizio imposta il vale "none"
+WEATHER_SERVICE="openweathermap"
+#WEATHER_SERVICE="none" # Nessun servizio configurato
+
+# Parametri di openweathermap, definisce l'api key e il luogo per recuperare lo stato meteo online
+OPENWEATHERMAP_KEY=""
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it" # https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"	# Time zone
+
+# Parametri di wunderground, definisce l'api key e il luogo per recuperare lo stato meteo online
 WUNDERGROUND_KEY=""
-WUNDERGROUND_LOCATION="IY/Monsummano"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+WUNDERGROUND_LOCATION="IT/Pieve%20a%20Nievole"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+
 
 # Blocca l'irrigazione se l'ultima pioggia rilevata online è avvenuta nell'ultima quantità di tempo inserita.
 # Il tempo è espresso in secondi. Quindi inserendo 86400, se nelle ultime 24 ore ha piovuto viene bloccata l'irrigazione. Inserendo il valore zero non viene eseguito nessun controllo.
@@ -128,3 +157,12 @@ TCPSERVER_PWD=""
 # Con impostato il valore 1 non invia l'identificativi per statistiche di utilizzo
 NO_SEND_IDENTIFIER=0
 
+# Parametri connessione al broker mqtt
+MQTT_ENABLE=0	# set 1 to enable
+MQTT_HOST=you_host_mqtt
+MQTT_PORT=1883
+MQTT_USER=your_user_mqtt
+MQTT_PWD=yout_password_mqtt
+MQTT_TOPIC="pigarden/result"
+MQTT_CLIENT_ID=piGarden
+

conf/piGarden.conf.rainsensorqty.example

@@ -0,0 +1,174 @@
+# Log file
+LOG_FILE="/home/pi/piGarden/log/piGarden.log"
+LOG_FILE_MAX_SIZE=1048576 # 1MB
+
+#
+# Enable send log to piGardenWeb
+#
+
+#LOG_URL="http://url_of_your_pigardenweb/api/log"
+#LOG_API_TOKEN="token_of_pigardenweb_user"
+#LOG_CURL_PARAM="--data-urlencode -k"
+
+# Log file for driver output
+LOG_OUTPUT_DRV_FILE="/tmp/piGarden.drv.log"
+
+# Status directory
+STATUS_DIR="/home/pi/piGarden/state"
+
+# Event directory
+EVENT_DIR="/home/pi/piGarden/events"
+
+# Posizione gpio
+GPIO="/usr/local/bin/gpio"
+
+# Posizione js
+JQ="/usr/local/bin/jq"
+
+# Percorso curl
+CURL="/usr/bin/curl"
+
+# Percorso wc
+WC="/usr/bin/wc"
+
+# Percorso gzip
+GZIP="/bin/gzip"
+
+# Percorso mv
+MV="/bin/mv"
+
+# Percorso di tr
+TR="/usr/bin/tr"
+
+# Percorso di cut
+CUT="/usr/bin/cut"
+
+# Percorso tcpserver
+TCPSERVER="/usr/bin/tcpserver"
+
+# Percorso cron
+CRONTAB="/usr/bin/crontab"
+
+# Percorso grep
+GREP="/bin/grep"
+
+# Percorsp sed
+SED="/bin/sed"
+
+# Percorso readlink
+READLINK="/bin/readlink"
+
+# Percorso stat
+STAT="/usr/bin/stat"
+
+# Percorso mosquito_pub
+# # Installare con apt install mosquitto-clients
+MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
+
+# Percorso di piGardenSched, se non definito non verranno gestire le schedulazioni di piGardenSched tramite api
+#PIGARDENSCHED_PATH="/home/pi/piGardenSched/piGardenSched.sh"
+
+
+# Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
+# se impostato a 0 il sistema gestirà elettrovalvole bistabili
+EV_MONOSTABLE=0
+
+# Id gpio usati per simulare il doppio deviatore con cui eseguire l'alimentazione alle elettrovalvole
+SUPPLY_GPIO_1=2		# Physical 3 - wPi 8
+SUPPLY_GPIO_2=3		# Physical 5 - wPi 9
+
+# Stato dei due gpio per impartire l'alimentazione positiva alle elettrovalvole (aperta)
+SUPPLY_GPIO_POS=0
+
+# Stato dei due gpio per impartire l'alimentazione negativa alle elettrovalvole (chiusa)
+SUPPLY_GPIO_NEG=1
+
+# Stato di ingresso da assegnare al gpio per chiudere il rele
+RELE_GPIO_CLOSE=0
+
+# Stato di ingresso da assegnare al gpio per aprire il rele
+RELE_GPIO_OPEN=1
+
+# Id del gpio usato per collegare il sensore di rilevamento pioggia
+# attraverso il driver rainsensorqty
+RAIN_GPIO="drv:rainsensorqty:25"        # Physical 22 - wPi 6
+
+# Valore in ingresso sul gpio definito in RAIN_GPIO che indica lo stato di pioggia
+# variabile usata anche da drv:rainsensorqty, se e' a 1, significa che il reed contact e' collegato ad un circuito pull-down, vuol dire che attende l'impulso a 1 per contare le vaschette, normalmente e' a 0.
+# se e' a 0, significa che il reed contact e' collegato ad un circuito pull-up, vuol dire che attende l'impulso a 0 per contare le vaschette, normalmente e' a 0.
+RAIN_GPIO_STATE=0
+
+RAINSENSORQTY_LOOPSFORSETRAINING=16 # dopo 16 impulsi, 16 vaschette riempite si considera pioggia
+RAINSENSORQTY_SECSBETWEENRAINEVENT=10800 # =3h, significa che dopo 3 ore si resetta il numero di vaschette riempire e solo dopo un nuovo ciclo di riempimento si considera una nuova pioggia
+
+RAINSENSORQTY_MMEACH=0.33 # see RAINSENSORQTY driver readme for details
+
+
+
+# Numero totale di elettrovalvole
+EV_TOTAL=6
+
+# Definizione delle elettrovalvole
+EV1_ALIAS="1" #
+EV1_GPIO=17   #		Physical 11 - wPi 0
+#EV1_NORAIN=1 # 	Non interrompe l'irrigazione di questa zona in caso di pioggia
+#EV1_MONOSTABLE=1 #	L'elettrovalvola è monostabile
+
+EV2_ALIAS="2" #
+EV2_GPIO=27   #		Physical 13 - wPi 2
+
+EV3_ALIAS="3" #
+EV3_GPIO=22   #		Physical 15 - wPi 3
+
+EV4_ALIAS="4" #
+EV4_GPIO=18   #		Physical 12 - wPi 1
+
+EV5_ALIAS="5" #
+EV5_GPIO=23   #		Physical 16 - wPi 4
+
+EV6_ALIAS="6" #
+EV6_GPIO=24   #		Physical 18 - wPi 5
+
+
+# Definisci il servizio online da utilizzare per il controllo delle condizioni meteo, puoi scegliere openweathermap oppure wunderground.
+# Se non vuoi configurare nessun servizio imposta il vale "none"
+WEATHER_SERVICE="openweathermap"
+#WEATHER_SERVICE="none" # Nessun servizio configurato
+
+# Parametri di openweathermap, definisce l'api key e il luogo per recuperare lo stato meteo online
+OPENWEATHERMAP_KEY=""
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it" # https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"	# Time zone
+
+# Parametri di wunderground, definisce l'api key e il luogo per recuperare lo stato meteo online
+WUNDERGROUND_KEY=""
+WUNDERGROUND_LOCATION="IT/Pieve%20a%20Nievole"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+
+
+# Blocca l'irrigazione se l'ultima pioggia rilevata online è avvenuta nell'ultima quantità di tempo inserita.
+# Il tempo è espresso in secondi. Quindi inserendo 86400, se nelle ultime 24 ore ha piovuto viene bloccata l'irrigazione. Inserendo il valore zero non viene eseguito nessun controllo.
+NOT_IRRIGATE_IF_RAIN_ONLINE=86400
+
+# Il parametro è simile a quello precedente, il controllo però anziché essere fatto attingendo a wunderground, viene eseguito direttamente sul sensore se installato. Inserendo il valore zero non viene eseguito nessun controllo.
+NOT_IRRIGATE_IF_RAIN_SENSOR=86400
+
+# Indirizzo ip e porta di ascolto del socket server
+TCPSERVER_IP="127.0.0.1"
+TCPSERVER_PORT="8084"
+
+# Utente e password che i clients devono utilizzare per stabilire una connessione tramite socket server
+TCPSERVER_USER=""
+TCPSERVER_PWD=""
+
+# Con impostato il valore 1 non invia l'identificativi per statistiche di utilizzo
+NO_SEND_IDENTIFIER=0
+
+# Parametri connessione al broker mqtt
+MQTT_ENABLE=0	# set 1 to enable
+MQTT_HOST=you_host_mqtt
+MQTT_PORT=1883
+MQTT_USER=your_user_mqtt
+MQTT_PWD=yout_password_mqtt
+MQTT_TOPIC="pigarden/result"
+MQTT_CLIENT_ID=piGarden
+

conf/piGarden.conf.remote.example

@@ -0,0 +1,177 @@
+# Log file
+LOG_FILE="/home/pi/piGarden/log/piGarden.log"
+LOG_FILE_MAX_SIZE=1048576 # 1MB
+
+#
+# Enable send log to piGardenWeb
+#
+
+#LOG_URL="http://url_of_your_pigardenweb/api/log"
+#LOG_API_TOKEN="token_of_pigardenweb_user"
+#LOG_CURL_PARAM="--data-urlencode -k"
+
+# Log file for driver output
+#LOG_OUTPUT_DRV_FILE="/tmp/piGarden.drv.log"
+
+# Status directory
+STATUS_DIR="/home/pi/piGarden/state"
+
+# Event directory
+EVENT_DIR="/home/pi/piGarden/events"
+
+# Posizione gpio
+GPIO="/usr/local/bin/gpio"
+
+# Posizione js
+JQ="/usr/local/bin/jq"
+
+# Percorso curl
+CURL="/usr/bin/curl"
+
+# Percorso wc
+WC="/usr/bin/wc"
+
+# Percorso gzip
+GZIP="/bin/gzip"
+
+# Percorso mv
+MV="/bin/mv"
+
+# Percorso di tr
+TR="/usr/bin/tr"
+
+# Percorso di cut
+CUT="/usr/bin/cut"
+
+# Percorso tcpserver
+TCPSERVER="/usr/bin/tcpserver"
+
+# Percorso cron
+CRONTAB="/usr/bin/crontab"
+
+# Percorso grep
+GREP="/bin/grep"
+
+# Percorsp sed
+SED="/bin/sed"
+
+# Percorso readlink
+READLINK="/bin/readlink"
+
+# Percorso stat
+STAT="/usr/bin/stat"
+
+# Percorso mosquito_pub
+# Installare con apt install mosquitto-clients
+MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
+
+# Percorso di piGardenSched, se non definito non verranno gestire le schedulazioni di piGardenSched tramite api
+#PIGARDENSCHED_PATH="/home/pi/piGardenSched/piGardenSched.sh"
+
+
+# Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
+# se impostato a 0 il sistema gestirà elettrovalvole bisstabili
+EV_MONOSTABLE=0
+
+# Id gpio usati per simulare il doppio deviatore con cui eseguire l'alimentazione alle elettrovalvole
+SUPPLY_GPIO_1=2
+SUPPLY_GPIO_2=3
+
+# Stato dei due gpio per impartire l'alimentazione positiva alle elettrovalvole (aperta)
+SUPPLY_GPIO_POS=0
+
+# Stato dei due gpio per impartire l'alimentazione negativa alle elettrovalvole (chiusa)
+SUPPLY_GPIO_NEG=1
+
+# Stato di ingresso da assegnare al gpio per chiudere il rele
+RELE_GPIO_CLOSE=0
+
+# Stato di ingresso da assegnare al gpio per aprire il rele
+RELE_GPIO_OPEN=1
+
+# Id del gpio usato per collegare il sensore di rilevamento pioggia
+RAIN_GPIO=25		# Physical 22 - wPi 6
+
+# Valore in ingresso sul gpio definito in RAIN_GPIO che indica lo stato di pioggia
+RAIN_GPIO_STATE=0
+
+
+
+
+# Numero totale di elettrovalvole
+EV_TOTAL=4
+
+# Definizione delle elettrovalvole
+EV1_ALIAS="Giardino_Posteriore_DX" #
+EV1_GPIO="drv:remote:PIREMOTE1:Giardino_Posteriore_DX"
+#EV1_NORAIN=1 #         Non interrompe l'irrigazione di questa zona in caso di pioggia
+
+EV2_ALIAS="Giardino_Posteriore_CN" #
+EV2_GPIO="drv:remote:PIREMOTE2:Giardino_Posteriore_CN"
+
+EV3_ALIAS="Giardino_Posteriore_SX" #
+EV3_GPIO="drv:remote:PIREMOTE2:Giardino_Posteriore_SX"
+
+EV4_ALIAS="Giardino_Posteriore_GPIO" #
+EV4_GPIO="18"
+
+
+# Definisci il servizio online da utilizzare per il controllo delle condizioni meteo, puoi scegliere openweathermap oppure wunderground.
+# Se non vuoi configurare nessun servizio imposta il vale "none"
+WEATHER_SERVICE="openweathermap"
+#WEATHER_SERVICE="none" # Nessun servizio configurato
+
+# Parametri di openweathermap, definisce l'api key e il luogo per recuperare lo stato meteo online
+OPENWEATHERMAP_KEY=""
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it" # https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"	# Time zone
+
+# Parametri di wunderground, definisce l'api key e il luogo per recuperare lo stato meteo online
+WUNDERGROUND_KEY=""
+WUNDERGROUND_LOCATION="IT/Pieve%20a%20Nievole"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+
+
+# Blocca l'irrigazione se l'ultima pioggia rilevata online è avvenuta nell'ultima quantità di tempo inserita.
+# Il tempo è espresso in secondi. Quindi inserendo 86400, se nelle ultime 24 ore ha piovuto viene bloccata l'irrigazione. Inserendo il valore zero non viene eseguito nessun controllo.
+NOT_IRRIGATE_IF_RAIN_ONLINE=86400
+
+# Il parametro è simile a quello precedente, il controllo però anziché essere fatto attingendo a wunderground, viene eseguito direttamente sul sensore se installato. Inserendo il valore zero non viene eseguito nessun controllo.
+NOT_IRRIGATE_IF_RAIN_SENSOR=86400
+
+# Indirizzo ip e porta di ascolto del socket server
+TCPSERVER_IP="127.0.0.1"
+TCPSERVER_PORT="8084"
+
+# Utente e password che i clients devono utilizzare per stabilire una connessione tramite socket server
+TCPSERVER_USER=""
+TCPSERVER_PWD=""
+
+# Con impostato il valore 1 non invia l'identificativi per statistiche di utilizzo
+NO_SEND_IDENTIFIER=0
+
+# Parametri connessione al broker mqtt
+MQTT_ENABLE=0   # set 1 to enable
+MQTT_HOST=you_host_mqtt
+MQTT_PORT=1883
+MQTT_USER=your_user_mqtt
+MQTT_PWD=yout_password_mqtt
+MQTT_TOPIC="pigarden/result"
+MQTT_CLIENT_ID=piGarden
+
+
+#
+# Configurazione piGarden remoti
+#
+PIREMOTE1_IP="192.168.1.51"
+PIREMOTE1_PORT="8084"
+PIREMOTE1_USER=""
+PIREMOTE1_PWD=""
+
+PIREMOTE2_IP="192.168.1.52"
+PIREMOTE2_PORT="8084"
+PIREMOTE2_USER=""
+PIREMOTE2_PWD=""
+
+
+
+

conf/piGarden.conf.sonoff_tasmota_http.example

@@ -0,0 +1,177 @@
+# Log file
+LOG_FILE="/home/pi/piGarden/log/piGarden.log"
+LOG_FILE_MAX_SIZE=1048576 # 1MB
+
+#
+# Enable send log to piGardenWeb
+#
+
+#LOG_URL="http://url_of_your_pigardenweb/api/log"
+#LOG_API_TOKEN="token_of_pigardenweb_user"
+#LOG_CURL_PARAM="--data-urlencode -k"
+
+# Log file for driver output
+#LOG_OUTPUT_DRV_FILE="/tmp/piGarden.drv.log"
+
+# Status directory
+STATUS_DIR="/home/pi/piGarden/state"
+
+# Event directory
+EVENT_DIR="/home/pi/piGarden/events"
+
+# Posizione gpio
+GPIO="/usr/local/bin/gpio"
+
+# Posizione js
+JQ="/usr/local/bin/jq"
+
+# Percorso curl
+CURL="/usr/bin/curl"
+
+# Percorso wc
+WC="/usr/bin/wc"
+
+# Percorso gzip
+GZIP="/bin/gzip"
+
+# Percorso mv
+MV="/bin/mv"
+
+# Percorso di tr
+TR="/usr/bin/tr"
+
+# Percorso di cut
+CUT="/usr/bin/cut"
+
+# Percorso tcpserver
+TCPSERVER="/usr/bin/tcpserver"
+
+# Percorso cron
+CRONTAB="/usr/bin/crontab"
+
+# Percorso grep
+GREP="/bin/grep"
+
+# Percorsp sed
+SED="/bin/sed"
+
+# Percorso readlink
+READLINK="/bin/readlink"
+
+# Percorso stat
+STAT="/usr/bin/stat"
+
+# Percorso mosquito_pub
+# # Installare con apt install mosquitto-clients
+MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
+
+# Percorso di piGardenSched, se non definito non verranno gestire le schedulazioni di piGardenSched tramite api
+#PIGARDENSCHED_PATH="/home/pi/piGardenSched/piGardenSched.sh"
+
+
+# Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
+# se impostato a 0 il sistema gestirà elettrovalvole bisstabili
+EV_MONOSTABLE=0
+
+# Id gpio usati per simulare il doppio deviatore con cui eseguire l'alimentazione alle elettrovalvole
+SUPPLY_GPIO_1=2
+SUPPLY_GPIO_2=3
+
+# Stato dei due gpio per impartire l'alimentazione positiva alle elettrovalvole (aperta)
+SUPPLY_GPIO_POS=0
+
+# Stato dei due gpio per impartire l'alimentazione negativa alle elettrovalvole (chiusa)
+SUPPLY_GPIO_NEG=1
+
+# Stato di ingresso da assegnare al gpio per chiudere il rele
+RELE_GPIO_CLOSE=0
+
+# Stato di ingresso da assegnare al gpio per aprire il rele
+RELE_GPIO_OPEN=1
+
+# Id del gpio usato per collegare il sensore di rilevamento pioggia
+RAIN_GPIO=25		# Physical 22 - wPi 6
+
+# Valore in ingresso sul gpio definito in RAIN_GPIO che indica lo stato di pioggia
+RAIN_GPIO_STATE=0
+
+
+
+
+# Numero totale di elettrovalvole
+EV_TOTAL=4
+
+# Definizione delle elettrovalvole
+EV1_ALIAS="Giardino_Posteriore_DX"
+EV1_GPIO="drv:sonoff_tasmota_http:SONOFF1:Power1"
+EV1_MONOSTABLE=1
+
+EV2_ALIAS="Giardino_Posteriore_CN"
+EV2_GPIO="drv:sonoff_tasmota_http:SONOFF1:Power2"
+EV2_MONOSTABLE=1
+
+EV3_ALIAS="Giardino_Posteriore_SX"
+EV3_GPIO="drv:sonoff_tasmota_http:SONOFF1:Power3"
+EV3_MONOSTABLE=1
+
+EV4_ALIAS="Giardino_Anteriore"
+EV4_GPIO="drv:sonoff_tasmota_http:SONOFF2:Power1"
+
+
+# Definisci il servizio online da utilizzare per il controllo delle condizioni meteo, puoi scegliere openweathermap oppure wunderground.
+# Se non vuoi configurare nessun servizio imposta il vale "none"
+WEATHER_SERVICE="openweathermap"
+#WEATHER_SERVICE="none" # Nessun servizio configurato
+
+# Parametri di openweathermap, definisce l'api key e il luogo per recuperare lo stato meteo online
+OPENWEATHERMAP_KEY=""
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it" # https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"	# Time zone
+
+# Parametri di wunderground, definisce l'api key e il luogo per recuperare lo stato meteo online
+WUNDERGROUND_KEY=""
+WUNDERGROUND_LOCATION="IT/Pieve%20a%20Nievole"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+
+
+# Blocca l'irrigazione se l'ultima pioggia rilevata online è avvenuta nell'ultima quantità di tempo inserita.
+# Il tempo è espresso in secondi. Quindi inserendo 86400, se nelle ultime 24 ore ha piovuto viene bloccata l'irrigazione. Inserendo il valore zero non viene eseguito nessun controllo.
+NOT_IRRIGATE_IF_RAIN_ONLINE=86400
+
+# Il parametro è simile a quello precedente, il controllo però anziché essere fatto attingendo a wunderground, viene eseguito direttamente sul sensore se installato. Inserendo il valore zero non viene eseguito nessun controllo.
+NOT_IRRIGATE_IF_RAIN_SENSOR=86400
+
+# Indirizzo ip e porta di ascolto del socket server
+TCPSERVER_IP="127.0.0.1"
+TCPSERVER_PORT="8084"
+
+# Utente e password che i clients devono utilizzare per stabilire una connessione tramite socket server
+TCPSERVER_USER=""
+TCPSERVER_PWD=""
+
+# Con impostato il valore 1 non invia l'identificativi per statistiche di utilizzo
+NO_SEND_IDENTIFIER=0
+
+# Parametri connessione al broker mqtt
+MQTT_ENABLE=0   # set 1 to enable
+MQTT_HOST=you_host_mqtt
+MQTT_PORT=1883
+MQTT_USER=your_user_mqtt
+MQTT_PWD=yout_password_mqtt
+MQTT_TOPIC="pigarden/result"
+MQTT_CLIENT_ID=piGarden
+
+
+#
+# Configurazione moduli sonoff
+#
+SONOFF1_IP="192.168.1.1"
+SONOFF1_USER="user"
+SONOFF1_PWD="pwd"
+
+SONOFF2_IP="192.168.1.21"
+SONOFF2_USER=""
+SONOFF2_PWD=""
+
+
+
+

conf/piGarden.conf.spb16ch.example

@@ -2,6 +2,14 @@
 LOG_FILE="/home/pi/piGarden/log/piGarden.log"
 LOG_FILE_MAX_SIZE=1048576 # 1MB
 
+#
+# Enable send log to piGardenWeb
+#
+
+#LOG_URL="http://url_of_your_pigardenweb/api/log"
+#LOG_API_TOKEN="token_of_pigardenweb_user"
+#LOG_CURL_PARAM="--data-urlencode -k"
+
 # Log file for driver output
 #LOG_OUTPUT_DRV_FILE="/tmp/piGarden.drv.log"
 
@@ -53,6 +61,14 @@ READLINK="/bin/readlink"
 # Percorso stat
 STAT="/usr/bin/stat"
 
+# Percorso mosquito_pub
+# Installare con apt install mosquitto-clients
+MOSQUITTO_PUB="/usr/bin/mosquitto_pub"
+
+# Percorso di piGardenSched, se non definito non verranno gestire le schedulazioni di piGardenSched tramite api
+#PIGARDENSCHED_PATH="/home/pi/piGardenSched/piGardenSched.sh"
+
+
 # Se impostato con il valore 1, indica che il sistema gestisce elettrovalvole monostabili, 
 # se impostato a 0 il sistema gestirà elettrovalvole bisstabili
 EV_MONOSTABLE=1
@@ -472,9 +488,20 @@ EV128_ALIAS="Zona_128" #
 EV128_GPIO="drv:spb16ch:128"
 
 
-# Definisce l'api key e il luogo per recuperare lo stato meteo online
+# Definisci il servizio online da utilizzare per il controllo delle condizioni meteo, puoi scegliere openweathermap oppure wunderground.
+# Se non vuoi configurare nessun servizio imposta il vale "none"
+WEATHER_SERVICE="openweathermap"
+#WEATHER_SERVICE="none" # Nessun servizio configurato
+
+# Parametri di openweathermap, definisce l'api key e il luogo per recuperare lo stato meteo online
+OPENWEATHERMAP_KEY=""
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it" # https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"	# Time zone
+
+# Parametri di wunderground, definisce l'api key e il luogo per recuperare lo stato meteo online
 WUNDERGROUND_KEY=""
-WUNDERGROUND_LOCATION="IY/Monsummano"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+WUNDERGROUND_LOCATION="IT/Pieve%20a%20Nievole"	# http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1
+
 
 # Blocca l'irrigazione se l'ultima pioggia rilevata online è avvenuta nell'ultima quantità di tempo inserita.
 # Il tempo è espresso in secondi. Quindi inserendo 86400, se nelle ultime 24 ore ha piovuto viene bloccata l'irrigazione. Inserendo il valore zero non viene eseguito nessun controllo.
@@ -494,6 +521,15 @@ TCPSERVER_PWD=""
 # Con impostato il valore 1 non invia l'identificativi per statistiche di utilizzo
 NO_SEND_IDENTIFIER=0
 
+# Parametri connessione al broker mqtt
+MQTT_ENABLE=0   # set 1 to enable
+MQTT_HOST=you_host_mqtt
+MQTT_PORT=1883
+MQTT_USER=your_user_mqtt
+MQTT_PWD=yout_password_mqtt
+MQTT_TOPIC="pigarden/result"
+MQTT_CLIENT_ID=piGarden
+
 
 #
 # Configurazione schede spb16ch

drv/openweathermap/README.md

@@ -0,0 +1,13 @@
+# Driver for check wather condition with openweathermap online service
+
+# Example of configuration in piGarden.conf
+
+```bash
+WEATHER_SERVICE="openweathermap"
+
+OPENWEATHERMAP_KEY="d4d22ea805788420267971135563b4cc" # Set with your api key of openweathermap
+OPENWEATHERMAP_LOCATION="q=Pieve%20a%20Nievole,it"    # Set with location identify, see https://openweathermap.org/current
+OPENWEATHERMAP_TZ="Europe/Rome"			      # Set with your time zone
+```
+
+

drv/openweathermap/common.include.sh

@@ -0,0 +1,123 @@
+#
+# Funzioni comuni utilizzate dal driver
+#
+
+#
+# Recupera la descrizione della condizione meteo
+#
+# $1 condizione meteo recuperata dalle api
+#
+function drv_openweathermap_get_wather {
+
+	declare -A w
+
+	w["thunderstorm with light rain"]="Thunderstorms and Rain"
+	w["thunderstorm with rain"]="Thunderstorms and Rain"
+	w["thunderstorm with heavy rain"]="Thunderstorms and Rain"
+	w["light thunderstorm"]="Thunderstorm"
+	w["thunderstorm"]="Thunderstorm"
+	w["heavy thunderstorm"]="Thunderstorm"
+	w["ragged thunderstorm"]="Thunderstorm"
+	w["thunderstorm with light drizzle"]="Thunderstorms and Rain"
+	w["thunderstorm with drizzle"]="Thunderstorms and Rain"
+	w["thunderstorm with heavy drizzle"]="Thunderstorms and Rain"
+
+	w["light intensity drizzle"]="Drizzle"
+	w["drizzle"]="Drizzle"
+	w["heavy intensity drizzle"]="Drizzle"
+	w["light intensity drizzle rain"]="Drizzle"
+	w["drizzle rain"]="Drizzle"
+	w["heavy intensity drizzle rain"]="Drizzle"
+	w["shower rain and drizzle"]="Drizzle"
+	w["heavy shower rain and drizzle"]="Drizzle"
+	w["shower drizzle"]="Drizzle"
+
+	w["light rain"]="Rain Mist"
+	w["moderate rain"]="Rain"
+	w["heavy intensity rain"]="Rain"
+	w["very heavy rain"]="Rain"
+	w["extreme rain"]="Rain"
+	w["freezing rain"]="Freezing Rain"
+	w["light intensity shower rain"]="Rain"
+	w["shower rain"]="Rain"
+	w["heavy intensity shower rain"]="Rain"
+	w["ragged shower rain"]="Rain"
+
+	w["light snow"]="Snow"
+	w["snow"]="Snow"
+	w["heavy snow"]=""
+	w["sleet"]="Snow Grains"
+	w["shower sleet"]="Snow Grains"
+	w["light rain and snow"]="Snow"
+	w["rain and snow"]="Snow"
+	w["light shower snow"]="Snow"
+	w["shower snow"]="Snow"
+	w["heavy shower snow"]="Snow"
+
+	w["mist"]="Mist"
+	w["smoke"]="Smoke"
+	w["haze"]="Haze"
+	w["sand, dust whirls"]="Dust Whirls"
+	w["fog"]="Fog"
+	w["sand"]="Sand"
+	w["dust"]="Widespread Dust"
+	w["volcanic ash"]="Volcanic Ash"
+	w["squalls"]="Squalls"
+	w["tornado"]="Tornado"
+
+	w["clear sky"]="Clear"
+
+	w["few clouds"]="Partly Cloudy"
+	w["scattered clouds"]="Scattered Clouds"
+	w["broken clouds"]="Partly Cloudy"
+	w["overcast clouds"]="Mostly Cloudy"
+
+	local weather=${w[$1]}
+
+	if [ -z "$weather" ]; then
+		weather="$1"
+	fi
+
+	echo $weather
+
+}																												    
+
+#
+# Recupera la l'icona rappresentativa delle condizione meteo
+#
+# $1 nome dell'icona recuperato delle api weather.icon
+#
+function drv_openweathermap_get_ico {
+
+	declare -A w
+
+	w["01d"]="http://icons.wxug.com/i/c/k/clear.gif"
+	w["01n"]="http://icons.wxug.com/i/c/k/nt_clear.gif"
+	w["02d"]="http://icons.wxug.com/i/c/k/partlycloudy.gif"
+	w["02n"]="http://icons.wxug.com/i/c/k/nt_partlycloudy.gif"
+	w["03d"]="http://icons.wxug.com/i/c/k/cloudy.gif"
+	w["03n"]="http://icons.wxug.com/i/c/k/nt_cloudy.gif"
+	w["04d"]="http://icons.wxug.com/i/c/k/cloudy.gif"
+	w["04n"]="http://icons.wxug.com/i/c/k/nt_cloudy.gif"
+	w["09d"]="http://icons.wxug.com/i/c/k/sleet.gif"
+	w["09n"]="http://icons.wxug.com/i/c/k/nt_sleet.gif"
+	w["10d"]="http://icons.wxug.com/i/c/k/rain.gif"
+	w["10n"]="http://icons.wxug.com/i/c/k/nt_rain.gif"
+	w["11d"]="http://icons.wxug.com/i/c/k/tstorms.gif"
+	w["11n"]="http://icons.wxug.com/i/c/k/nt_tstorms.gif"
+	w["13d"]="http://icons.wxug.com/i/c/k/snow.gif"
+	w["13n"]="http://icons.wxug.com/i/c/k/nt_snow.gif"
+	w["50d"]="http://icons.wxug.com/i/c/k/fog.gif"
+	w["50n"]="http://icons.wxug.com/i/c/k/nt_fog.gif"
+
+	local ico=${w[$1]}
+
+	if [ -z "$ico" ]; then
+		ico="$1"
+	fi
+
+	echo $ico
+
+}																												    
+
+

drv/openweathermap/rainonline.include.sh

@@ -0,0 +1,74 @@
+#
+# Ritorna lo stato delle condizioni meteo interrogando il servizio online 
+#
+# $i 	identificativo gpio del sensore di pioggia
+#
+# return output:	0  - errore durante il recupero delle condizioni meteo 
+#			>0 - rilevato pioggia, timestamp del rilevamento
+#			<0 - rilevato nessuna pioggia, timestamp del rilevamento
+function drv_openweathermap_rain_online_get {
+
+	# http://www.wunderground.com/weather/api/d/docs?d=resources/phrase-glossary&MR=1
+	$CURL "http://api.openweathermap.org/data/2.5/weather?$OPENWEATHERMAP_LOCATION&units=metric&appid=$OPENWEATHERMAP_KEY" > $TMP_PATH/check_rain_online.openweathermap.json
+	local weather=`cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -M ".weather[0].main"`
+
+	local wind_deg=$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".wind.deg")
+	local wind_speed=$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".wind.speed")
+	if [ "$wind_speed" == "null" ]; then
+		#wind_speed=$($JQ -n $wind_speed*3600/1000)
+		wind_speed=0
+	fi
+
+
+	local weather="$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".weather[0].description")"
+	local ico=$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".weather[0].icon")
+	weather=$(drv_openweathermap_get_wather "$weather")
+	ico=$(drv_openweathermap_get_ico "$ico")
+
+	local current_observation=$(cat <<EOF
+{
+  "display_location": {
+    "city": "$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".name")"
+  },
+  "observation_epoch": "$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".dt")",
+  "local_epoch": "$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".dt")",
+  "local_tz_long": "$OPENWEATHERMAP_TZ",
+  "weather": "$weather",
+  "temp_c": "$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".main.temp")",
+  "relative_humidity": "$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".main.humidity")%",
+  "wind_dir": "$(deg2dir $wind_deg)",
+  "wind_degrees": "$wind_deg",
+  "wind_kph": "$wind_speed",
+  "wind_gust_kph": "--",
+  "pressure_mb": "$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".main.pressure")",
+  "dewpoint_c": "--",
+  "feelslike_c": "--",
+  "icon_url": "$ico"
+}
+EOF
+)
+#  "icon_url": "http://openweathermap.org/img/w/$(cat $TMP_PATH/check_rain_online.openweathermap.json | $JQ -r -M ".weather[0].icon").png"
+
+	#local current_observation=`cat $TMP_PATH/check_rain_online.json | $JQ -M ".current_observation"`
+
+	if [ "$weather" = "null" ]; then
+		echo "0"
+	else
+		echo "$current_observation" > "$STATUS_DIR/last_weather_online"
+		local local_epoch=`cat $STATUS_DIR/last_weather_online | $JQ -M -r ".local_epoch"`
+		if 	[[ "$weather" == *"Rain"* ]] || 
+		 	[[ "$weather" == *"Snow"* ]] || 
+	 		[[ "$weather" == *"Hail"* ]] || 
+			[[ "$weather" == *"Ice"* ]] || 
+			[[ "$weather" == *"Thunderstorm"* ]] || 
+			[[ "$weather" == *"Drizzle"* ]]; 
+		then
+			echo $local_epoch
+		else
+			echo "-$local_epoch"
+		fi
+	fi
+
+}
+
+

drv/rainsensorqty/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+.set_var
+# Except this file
+!.gitignore

drv/rainsensorqty/README.md

@@ -0,0 +1,124 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file README.md
+# Version: 0.2.5
+# Data: 07/Apr/2020
+
+
+FILE DI CONFIGURAZIONE /etc/piGarden.conf:
+-----------------------------------------
+NOTA: vedere nella directory conf_example il file esempio piu' aggiornato!
+
+per attivare il driver e' necessario inserire la seguente variabile nel file di configurazion
+	RAIN_GPIO="drv:rainsensorqty:25"        # Physical 22 - wPi 6
+
+la variabile seguente e' impiegata anche da drv_rainsensorqty per rilevare la chiusura del contatto magnetico che, in un circuito pull-up, e' lo stato 1.
+	# Valore in ingresso sul gpio definito in RAIN_GPIO che indica lo stato di pioggia
+	RAIN_GPIO_STATE=1
+le seguenti variabili controllano il driver come descritto:
+	RAINSENSORQTY_LOOPSFORSETRAINING=16 # dopo 16 impulsi, 16 vaschette riempite si considera pioggia
+	RAINSENSORQTY_SECSBETWEENRAINEVENT=10800 # =3h, significa che dopo 3 si resetta il numero di vaschette da riempire e solo dopo il riempimento del nuovo numero di vaschette si considera una nuova pioggia
+infine la variabile seguente e' la quantita' di acqua espressa in mm di precipitazioni:
+	RAINSENSORQTY_MMEACH=0.33 # see RAINSENSORQTY driver readme for details
+
+CALIBRAZIONE SENSORE PIOGGIA
+----------------------------
+secondo il seguente processo da me effettuato sul mio misuratore di pioggia:
+Ho erogato 18 ml di acqua nel rain gauge che hanno prodotto 10 impulsi; pertanto il riempimento di 1.8 ml ha causato un impulso, 1 ml = 1000 mmc (mm cubici),
+1.8 ml sono pari a 1800 mmc
+la superficie della vaschetta in mmq e' pari a 110 mm x 55 mm = 5500 mmq
+volume / superficie mi da' l'altezza, quindi 1800 mmc / 5500 mmq = 0.32727273 mm
+se fossero stati 1.7 ml di acqua per ogni impulso/vaschetta riempita, la variabile sarebbe stata impostata a 0.30909091 mm
+
+COMANDI SPECIALI
+----------------
+nella sottodirectory command sono presenti:
+commands/rainsensorqty_CHECK.sh
+	chiama la funzione di verifica pioggia, la medesima chiamata da check_rain_sensor
+commands/rainsensorqty_HISTORY.sh
+	visualizza lo storico della pioggia consultando il file $RAINSENSORQTY_HISTORY
+	puo' essere lanciato con l''opzione -force per ricostruire il file $RAINSENSORQTY_HISTORY dal $RAINSENSORQTY_HISTORYRAW
+	e con un argomento X, che permette di evidenziare solo gli ultimi X eventi
+commands/rainsensorqty_HISTORYRAW.sh
+	visualizza lo storico della pioggia consultando il file $RAINSENSORQTY_HISTORYRAW
+	puo' essere lanciato senza argomenti per processare l'intero file, chiede conferma visto che i tempi sono potenzialmente lunghi
+	con un argomento X, che permette di evidenziare solo gli ultimi X eventi
+commands/rainsensorqty_INIT.sh
+	inizializza il driver eseguendo lo script di monitoring - normalmente tale processo avviene da piGarden.sh
+	utile quando si vuole testare dei cambiamenti o se necessario riavviare dopo il kill del comando successivo
+commands/rainsensorqty_KILL.sh
+	killa i processi di monitoring ed eventuali figli
+commands/rainsensorqty_RAINNOW.sh
+	simula una pioggia registrandola in $RAINSENSORQTY_LASTRAIN $RAINSENSORQTY_HISTORY $RAINSENSORQTY_HISTORYRAW
+	puo' essere lanciato in 3 modi:
+	senza argomenti: genera una pioggia per un numero di loop pari al valore della variabile RAINSENSORQTY_LOOPSFORSETRAINING, quindi una pioggia completa
+	con un argomento: che indica quanti loop
+	con due argomenti: quanti loop e quanti secondi tra uno e l'altro
+commands/rainsensorqty_REMOVELASTRAIN.sh
+	rimuove dai file $RAINSENSORQTY_LASTRAIN $RAINSENSORQTY_HISTORY $RAINSENSORQTY_HISTORYRAW l'ultima pioggia registrata
+commands/rainsensorqty_RESET.sh
+	invia il SIGUSR1 al processo di monitor per resettare i cicli. Viene visualizzato il reset solo dopo il successivo PULSE, questo perche' non e' possibile per lo script ricevere il trap in quanto il processo $GPIO e' attivo in attesa del PULSE
+
+questi i timestamps alla data del file:
+-rwxr-xr-x 1 pi pi 1044 Sep 24 18:26 rainsensorqty_CHECK.sh
+-rwxr-xr-x 1 pi pi 1139 Nov 28 00:17 rainsensorqty_HISTORYRAW.sh
+-rwxr-xr-x 1 pi pi 1462 Nov 19 00:19 rainsensorqty_HISTORY.sh
+-rwxr-xr-x 1 pi pi  596 Sep 24 18:26 rainsensorqty_INIT.sh
+-rwxr-xr-x 1 pi pi 1300 Sep 24 18:26 rainsensorqty_KILL.sh
+-rwxr-xr-x 1 pi pi 1111 Nov 27 00:05 rainsensorqty_RAINNOW.sh
+-rwxr-xr-x 1 pi pi 1252 Nov 22 00:18 rainsensorqty_REMOVELASTRAIN.sh
+-rwxr-xr-x 1 pi pi  897 Sep 24 18:26 rainsensorqty_RESET.sh
+
+ULTERIORI VARIABILI in config.include.sh
+----------------------------------------
+esistono ulteriori variabili che potrebbe essere necessario variare
+
+RAINSENSOR_DEBOUNCE=0.3 # 0.3 seconds for manage debounce of reed contact
+	serve per ritardare la lettura di un secondo impulso falso causato dal rimbalzo del contatto magnetico
+
+RAINSENSORQTY_verbose="yes"
+	aumenta il livello di verbosita' nei file di log
+	
+RAINSENSORQTY_LASTRAIN="$STATUS_DIR/rainsensorqty_lastrain"
+	memorizza l'ultima pioggia
+RAINSENSORQTY_HISTORY="$STATUS_DIR/rainsensorqty_history"
+	memorizza tutte le piogge permettendo di visualizzare lo storico (commands/rainsensorqty_HISTORY.sh)
+RAINSENSORQTY_HISTORYRAW="$STATUS_DIR/rainsensorqty_history.raw"
+	memorizza in formato grezzo (raw) tutti gli impulsi registrati  (formato: "secondi:impulsi" ) - consultabile il contenuto con commands/rainsensorqty_HISTORYRAW.sh
+
+RAINSENSORQTY_MONITORLOG="$DIR_SCRIPT/log/rainsensorqty_monitor.log"
+	log dello script di monitoring, popolato solo se RAINSENSORQTY_verbose="yes"
+
+RAINSENSORQTY_MONPID="$TMPDIR/rainsensorqty_monitor.pid"
+	file che viene popolato con il pid dello script di monitoring
+
+RAINSENSORQTY_DIR="$DIR_SCRIPT/drv/rainsensorqty"
+	home directory del driver
+
+monitor_sh="$RAINSENSORQTY_DIR/drv_rainsensorqty_monitor.sh"
+	script di monitoring
+	lo script eredita le variabili di ambiente da $RAINSENSORQTY_VAR ($TMPDIR/.rainsensorqty_var)
+
+NOTA: $TMPDIR e' /tmp e lo script visualizza un warning se non e' un tmpfs
+
+# internal gpio resistor, 3 values: pull-up, pull-down, none
+# pull-up/down if rain gauge is connected directly to raspberry
+# none if connected through an optocoupler circuit
+GPIO_RESISTOR="none" #pull-up|pull-down|none
+	enable pull-up or pull-down resistor: https://raspberry-projects.com/pi/pi-hardware/raspberry-pi-model-b-plus/model-b-plus-io-pins
+	Pull-up is 50K min - 65K max.
+	Pull-down is 50K min - 60K max. 
+
+#rising means waiting for 1 status (from 0)
+#falling means waiting for 0 status (from 1)
+#RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+#RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+(( RAIN_GPIO_STATE == 1 )) && RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+(( RAIN_GPIO_STATE == 0 )) && RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+
+	lo script di monitoring ascolta il cambiamento di stato da quello di riposo allo stato di impulso (chiusura del contatto reed).
+	dipendentemente dal circuto implementato, se lo stato di riposo e' 0, lo script attende la variazione verso 1 (rising)
+	se lo stato di riposo e' 1, lo script attende la variazione verso 0 (falling)
+	la variabile RAINSENSORQTY_PULSE viene impostata secondo il valore di RAIN_GPIO_STATE presente in /etc/piGarden.conf
+	cioe' il valore che ci si aspetta per registrare il riempimento della vaschetta dello stato di pioggia

drv/rainsensorqty/commands/rainsensorqty_CHECK.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_CHECK.sh"
+# test script for checking rain status using drv_rainsensorqty_rain_sensor_get function
+# Version: 0.2.0
+# Data: 11/Aug/2019
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+LOG_OUTPUT_DRV_FILE="$DIR_SCRIPT/log/$LOG_OUTPUT_DRV_FILE"
+
+. $CONFIG_ETC
+
+. ./common.include.sh
+. ./config.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+# restituisce 0 se piove, e nell'output di testo il valore di "$RAIN_GPIO_STATE"
+# restituisce 99 se non piove, output "norain"
+# esce con 1 se non c'e' il monitoring, output "ERROR"
+
+drv_rainsensorqty_rain_sensor_get
+case $? in
+	0)  echo "NORMAL: it's raining" ;;
+	99) echo "NORMAL: it's not raining" ;;
+	1)  echo "ERROR: monitor process $DIR_SCRIPT/drv/rainsensorqty/drv_rainsensorqty_monitor.sh is not running" ;;
+esac
+

drv/rainsensorqty/commands/rainsensorqty_HISTORY.sh

@@ -0,0 +1,59 @@
+#!/bin/bash
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_CHECK.sh"
+# test script for checking rain status using drv_rainsensorqty_rain_sensor_get function
+# Version: 0.2.5
+# Data: 08/Jan/2020
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+LOG_OUTPUT_DRV_FILE="$DIR_SCRIPT/log/$LOG_OUTPUT_DRV_FILE"
+
+. $CONFIG_ETC
+
+. ./common.include.sh
+. ./config.include.sh 
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+if [[ $1 = "-force" ]] ; then
+	if [[ -s $RAINSENSORQTY_HISTORY ]] ; then
+		echo backup $RAINSENSORQTY_HISTORY to ${RAINSENSORQTY_HISTORY}.old$$
+		cp $RAINSENSORQTY_HISTORY ${RAINSENSORQTY_HISTORY}.old$$
+	fi
+
+	echo "generate all rain events to $RAINSENSORQTY_HISTORY"
+	if ! rainevents > ${RAINSENSORQTY_HISTORY} ; then
+		echo "WARNING: rainevents function had error"
+	fi
+	shift
+fi
+
+if ! rain_history tmp ; then # update rain history with last rain if not
+	echo "WARNING: rain_history function had error"
+fi
+
+cmd="cat"
+if [[ $# > 0 ]] ; then
+	if (( $1 >= 1 )) ; then
+		echo "processing last $1 lines of $RAINSENSORQTY_HISTORYRAW file"
+		cmd="tail -$1"
+	else
+		echo "argument not recognized - exit"
+		exit 1
+	fi
+fi
+echo -e "\n\n"
+
+if [[ -s $RAINSENSORQTY_HISTORY ]] ; then
+	echo "RAIN HISTORY"
+	cat $RAINSENSORQTY_HISTORY $RAINSENSORQTY_HISTORYTMP | $cmd | rain_when_amount
+else
+	echo "WARNING: no \$RAINSENSORQTY_HISTORY file"
+fi

drv/rainsensorqty/commands/rainsensorqty_HISTORYRAW.sh

@@ -0,0 +1,50 @@
+#!/bin/bash
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_CHECK.sh"
+# test script for checking rain status using drv_rainsensorqty_rain_sensor_get function
+# Version: 0.2.5
+# Data: 07/Apr/2020
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+LOG_OUTPUT_DRV_FILE="$DIR_SCRIPT/log/$LOG_OUTPUT_DRV_FILE"
+
+. $CONFIG_ETC
+
+. ./common.include.sh
+. ./config.include.sh 
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+
+if [[ $# = 0 ]] ; then
+	cmd=cat
+	echo "processing all entire  $RAINSENSORQTY_HISTORYRAW file, will go on? (y/n)"
+	read answer
+	echo $answer
+	[[ $answer = [yY] ]] || exit 1
+else
+	if (( $1 >= 1 )) ; then
+		echo "processing $1 lines of $RAINSENSORQTY_HISTORYRAW file"
+		cmd="tail -$1"
+	else
+		echo "argument not recognized - exit"
+		exit 1
+	fi
+fi
+echo -e "\n\n"
+
+$cmd $RAINSENSORQTY_HISTORYRAW | while read line
+do
+	set -- ${line//:/ }
+	secs=$1
+	counter=$2
+	echo "$(sec2date $1):$counter"
+done
+ 

drv/rainsensorqty/commands/rainsensorqty_INIT.sh

@@ -0,0 +1,25 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_INIT.sh"
+# test script for initialize driver and executing monitor process
+# Version: 0.2.0
+# Data: 11/Aug/2019
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+
+. $CONFIG_ETC
+
+. ./config.include.sh
+. ./common.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+drv_rainsensorqty_rain_sensor_init
+
+drv_rainsensorqty_init

drv/rainsensorqty/commands/rainsensorqty_KILL.sh

@@ -0,0 +1,52 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_KILL.sh"
+# script for killing monitor process(es)
+# Version: 0.2.0a
+# Data: 29/Aug/2019
+
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+
+. $CONFIG_ETC
+
+. ./config.include.sh
+. ./common.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+# check if rain monitor process is running...
+if [[ -f "$RAINSENSORQTY_MONPID" ]] ; then
+        pid="$( < "$RAINSENSORQTY_MONPID" )"
+        if ps -fp $pid >/dev/null ; then
+		echo "process $pid pid and its child(ren)"
+		children_pid="$(ps -ef| awk "\$3==$pid {print \$2}")"
+		ps -fp $pid
+		ps -fp $children_pid | tail +2
+		echo -e "\nsending TERM signal to $pid and its child(ren)"
+		echo kill $children_pid
+		echo kill $pid
+		kill $children_pid
+		kill $pid
+		echo -e "\nchecking $pid pid and its child(ren) are still alive"
+		for process in $pid $children_pid
+		do
+        		if ps -fp $process >/dev/null ; then
+				echo "$process is still alive"
+			else
+				echo "$process is dead"
+			fi
+		done
+	else
+		echo "no RAIN process alive"
+        fi
+else
+	echo "no RAIN process alive"
+fi
+

drv/rainsensorqty/commands/rainsensorqty_RAINNOW.sh

@@ -0,0 +1,67 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_RAINNOW.sh"
+# test script for simulate rain ... now!
+# Version: 0.2.5
+# Data: 07/Apr/2020
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+. $CONFIG_ETC
+
+. ./config.include.sh
+. ./common.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+wait=0
+timestart=$( date +%s)
+if [[ $# -ne 0 ]] ; then
+	if [[ $# = 1 ]] ; then 
+		howmany=$1
+		echo "one argument passed: rain event for $howmany loops"
+		(( time = timestart - howmany ))
+	elif [[ $# = 2 ]] ; then 
+		howmany=$1
+		wait=$2
+		echo "two arguments passed: rain event for $howmany loops every $wait seconds"
+		(( time = timestart ))
+	else
+		echo "too many arguments... exit"
+		exit 1
+	fi
+else
+	howmany=$RAINSENSORQTY_LOOPSFORSETRAINING
+	(( time = timestart - $RAINSENSORQTY_LOOPSFORSETRAINING ))
+fi
+
+
+echo "RAIN now! (for $howmany loops)"
+for (( c=1; c<=$howmany; c++ )) 
+do
+	if (( wait > 0 )) ; then	
+		time=$( date +%s)
+	else
+		(( time+= 1 ))
+	fi
+	linetoadd="$time:$c"
+	echo $linetoadd >> $RAINSENSORQTY_HISTORYRAW
+	sleep $wait
+	echo -e ".\c"
+done
+echo
+
+if ! rain_history ; then # update rain history with last rain if not
+	echo "WARNING: rain_history function had error"
+fi
+
+echo $linetoadd > ${RAINSENSORQTY_LASTRAIN}
+echo "file ${RAINSENSORQTY_LASTRAIN} updated."
+
+echo "last 2 rain events:"
+tail -2 $RAINSENSORQTY_HISTORY | rain_when_amount

drv/rainsensorqty/commands/rainsensorqty_REMOVELASTRAIN.sh

@@ -0,0 +1,44 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "test_rainsensorqty_CHECK.sh"
+# test script for checking rain status using drv_rainsensorqty_rain_sensor_get function
+# Version: 0.2.5
+# Data: 07/Apr/2020
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+
+LOG_OUTPUT_DRV_FILE="$DIR_SCRIPT/log/$LOG_OUTPUT_DRV_FILE"
+
+. $CONFIG_ETC
+
+. ./common.include.sh
+. ./config.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+# two variables for store rain data
+# RAINSENSORQTY_LASTRAIN
+# RAINSENSORQTY_HISTORY
+
+echo "RAIN HISTORY - last two events"
+tail -2 $RAINSENSORQTY_HISTORY 
+tail -2 $RAINSENSORQTY_HISTORY | rain_when_amount
+
+echo "...removing last event"
+removelastrain
+echo "...rebuilding ${RAINSENSORQTY_HISTORY} from ${RAINSENSORQTY_HISTORYRAW}"
+if ! rainevents > ${RAINSENSORQTY_HISTORY} ; then
+	echo "WARNING: rainevents function had error"
+fi
+tail -1 ${RAINSENSORQTY_HISTORYRAW} > ${RAINSENSORQTY_LASTRAIN}
+
+echo -e "\nnew RAIN HISTORY - last two events"
+tail -2 $RAINSENSORQTY_HISTORY 
+tail -2 $RAINSENSORQTY_HISTORY | rain_when_amount
+

drv/rainsensorqty/commands/rainsensorqty_RESET.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_RESET.sh"
+# script for reset counter in monitor script
+# Version: 0.2.0a
+# Data: 29/Aug/2019
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+
+. $CONFIG_ETC
+
+. ./config.include.sh
+. ./common.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+# check if rain monitor process is running...
+if [[ -f "$RAINSENSORQTY_MONPID" ]] ; then
+        pid="$( < "$RAINSENSORQTY_MONPID" )"
+        if ps -fp $pid >/dev/null ; then
+		echo "sending SIGUSR1 to $pid"
+		kill -SIGUSR1 $pid
+		echo -e "sent SIGUSR1 - reset will be shown after next cycle"
+	else
+		echo "no RAIN process alive"
+        fi
+else
+	echo "no RAIN process alive"
+fi

drv/rainsensorqty/common.include.sh

@@ -0,0 +1,163 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "common.include.sh"
+# common functions used by driver
+# Version: 0.2.5
+# Data: 08/Jan/2020
+
+
+#note:
+#RAINSENSORQTY_MONPID="$TMPDIR/rainsensorqty_monitor.pid"
+#
+
+sec2date()
+{
+        date --date="@$1"
+}
+
+d() # short date & time
+{
+date '+%X-%x'
+}
+
+
+drv_rainsensorqty_writelog()
+{
+	#2 variables - $1 function, $2 message
+	if [[ $2 =~ ERROR || $2 =~ WARNING || $2 =~ RAIN || $RAINSENSORQTY_verbose = yes ]] ; then
+	        echo -e "$1 - `d`\t\t$2" >> "$LOG_OUTPUT_DRV_FILE"
+#        	if [[ $($WC -c <"$LOG_OUTPUT_DRV_FILE") > $LOG_FILE_MAX_SIZE )) ; then
+#                	$GZIP "$LOG_OUTPUT_DRV_FILE"
+#                	$MV "${LOG_OUTPUT_DRV_FILE}.gz" "${LOG_OUTPUT_DRV_FILE}.$(date +%Y%m%d%H%M).gz"
+#        	fi
+	fi
+}
+
+
+drv_rainsensorqty_check()
+{
+	local f="drv_rainsensorqty_check"
+
+	if [[ -f "$RAINSENSORQTY_MONPID" ]] ; then
+		local pid=$( < "$RAINSENSORQTY_MONPID" )
+		drv_rainsensorqty_writelog $f "NORMAL: checking if $pid pid is running"
+        	if ps -fp $pid >/dev/null ; then
+			drv_rainsensorqty_writelog $f "NORMAL: $pid pid is running"
+			return 0
+        	else
+			drv_rainsensorqty_writelog $f "ERROR: $pid pid monitor process NOT running - $RAINSENSORQTY_MONPID file contains $pid"
+			return 1
+        	fi
+	else
+		drv_rainsensorqty_writelog $f "ERROR: no raining monitor process file \$RAINSENSORQTY_MONPID"
+        	return 1
+	fi
+}
+
+en_echo() # enhanched echo - check verbose variable
+{
+	[[ $RAINSENSORQTY_verbose = yes ]] && echo "$(d) $*"
+}
+
+rain_history()
+{
+	[[ ! -f $RAINSENSORQTY_HISTORYRAW ]] && return 1
+	[[ ! -f $RAINSENSORQTY_HISTORY ]] && touch $RAINSENSORQTY_HISTORY
+	> $RAINSENSORQTY_HISTORYTMP
+
+	if lastrainevent=$( rainevents 1 ) ; then
+       		: # done ok
+	else
+        	echo "WARNING: rainevents function had errors"
+		return 1
+	fi
+
+#old	#if grep -q ^$(<$RAINSENSORQTY_LASTRAIN)$ $RAINSENSORQTY_HISTORY ; then
+	if grep -q ^${lastrainevent}$ $RAINSENSORQTY_HISTORY ; then
+		: # already present
+		return 0
+	else
+		: # missing and fixed 
+		if [[ $1 == tmp ]] ; then
+			echo $lastrainevent > $RAINSENSORQTY_HISTORYTMP
+		else
+			echo $lastrainevent >> $RAINSENSORQTY_HISTORY
+		fi
+		return 0
+	fi
+}
+
+rain_when_amount()
+{
+# from standard input
+# format  $time:$endtime:$endsequence
+cat - | while read line
+do
+        set -- ${line//:/ }
+        start=$1
+        stop=$2
+        howmuch=$3
+        printf "RAINED for %7.2f mm between %s and %s\n" $( $JQ -n "$howmuch * $RAINSENSORQTY_MMEACH" ) "$(date --date="@$start")" "$(date --date="@$stop")"
+done
+}
+
+check_TMPDIR()
+{
+        if [[ $(df  | awk '$NF=="/tmp" {print $1}') != "tmpfs" ]] ; then
+                echo "WARNING: /tmp isn't a tmp file system"
+                echo -e "\tplease add to your /etc/fstab file:\n\ttmpfs           /tmp            tmpfs defaults,noatime,nosuid   0       0"
+        fi
+}
+
+rainevents()
+{
+	if [[ ! -f $RAINSENSORQTY_HISTORYRAW ]] ; then
+		#echo "WARNING: no \$RAINSENSORQTY_HISTORYRAW file"# cannot echo, redirected output
+		return 1
+	fi
+	case $1 in
+       		[0-9]|[0-9][0-9]) howmanyevent=$1 ;;
+#		-1) skiplast=true ;;
+		*) howmanyevent=-1 ;;
+	esac
+
+	newloop=yes
+	tac $RAINSENSORQTY_HISTORYRAW | while read line
+	do
+		set -- ${line//:/ }
+		time=$1
+		sequence=$2
+		if [[ $newloop == yes ]] ; then
+			endtime=$time
+			endsequence=$sequence
+			newloop=no
+		fi
+		if (( sequence == 1 )) ; then
+#			[[ $skiplast=true ]] && { skilast=false ; continue ; }
+			echo $time:$endtime:$endsequence
+			newloop=yes
+			(( event +=1 ))
+		fi
+		(( howmanyevent == event )) && break
+	done | sort -k1n
+}
+
+removelastrain()
+{
+	if [[ ! -f $RAINSENSORQTY_HISTORYRAW ]] ; then
+		echo "WARNING: no \$RAINSENSORQTY_HISTORYRAW file"
+		return 1
+	fi
+
+	next=false
+	tac $RAINSENSORQTY_HISTORYRAW | while read line
+	do
+		set -- ${line//:/ }
+		time=$1
+		sequence=$2
+		[[ $next = true ]] && echo $line
+		(( sequence == 1 )) && next=true
+	done | tac > ${RAINSENSORQTY_HISTORYRAW}_$$
+	mv ${RAINSENSORQTY_HISTORYRAW}_$$ $RAINSENSORQTY_HISTORYRAW
+}

drv/rainsensorqty/conf_example/config.include.sh

@@ -0,0 +1,66 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "config.include.sh"
+# specific driver config file
+# Version: 0.2.5
+# Data: 08/Jan/2020
+
+export TMPDIR=/tmp
+
+RAINSENSOR_DEBOUNCE=0.3 # 0.3 seconds for manage debounce of reed contact
+
+RAINSENSORQTY_verbose="yes" # yes/no
+
+RAINSENSORQTY_LASTRAIN="$STATUS_DIR/rainsensorqty_lastrain"
+RAINSENSORQTY_HISTORY="$STATUS_DIR/rainsensorqty_history"
+RAINSENSORQTY_HISTORYRAW="$STATUS_DIR/rainsensorqty_history.raw"
+RAINSENSORQTY_HISTORYTMP="$TMPDIR/rainsensorqty_history.tmp"
+
+RAINSENSORQTY_MONITORLOG="$DIR_SCRIPT/log/rainsensorqty_monitor.log"
+
+RAINSENSORQTY_MONPID="$TMPDIR/rainsensorqty_monitor.pid"
+RAINSENSORQTY_STATE="$TMPDIR/rainsensorqty_state"
+RAINSENSORQTY_STATE_HIST="$TMPDIR/rainsensorqty_state.history"
+
+RAINSENSORQTY_DIR="$DIR_SCRIPT/drv/rainsensorqty"
+
+monitor_sh="$RAINSENSORQTY_DIR/drv_rainsensorqty_monitor.sh"
+
+# internal gpio resistor, 3 values: pull-up, pull-down, none
+# pull-up/down if rain gauge is connected directly to raspberry
+# none if connected through an optocoupler circuit
+GPIO_RESISTOR="pull-up" #pull-up|pull-down|none
+
+#rising means waiting for 1 status (from 0)
+#falling means waiting for 0 status (from 1)
+#RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+#RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+(( RAIN_GPIO_STATE == 1 )) && RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+(( RAIN_GPIO_STATE == 0 )) && RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+
+
+config_check()
+{
+	var2check="RAINSENSOR_DEBOUNCE RAINSENSORQTY_verbose RAINSENSORQTY_LASTRAIN RAINSENSORQTY_HISTORY RAINSENSORQTY_MONITORLOG RAINSENSORQTY_MONPID RAINSENSORQTY_DIR monitor_sh"
+	for var in $var2check
+	do
+		#${!a}
+		if [[ -z ${!var} ]] ; then
+			echo "ERROR: \$$var not set"
+			exit 1 
+		fi
+	done
+	if [[ -z $RAINSENSORQTY_PULSE ]] ; then
+		echo "ERROR: RAIN_GPIO_STATE not set in piGarden.conf"
+		exit 1
+	fi
+	return 0
+	case $GPIO_RESISTOR in
+		pull-up|pull-down|none) return 0 ;;
+		*) echo "ERROR: GPIO_RESISTOR not set correctly - values are \"pull-up|pull-down|none\" "
+			exit 1
+			;;
+	esac
+}
+

drv/rainsensorqty/conf_example/piGarden.conf.rainsensorqty.example

@@ -0,0 +1,14 @@
+# cfg file version 0.2.0
+# Id del gpio usato per collegare il sensore di rilevamento pioggia
+# attraverso il driver rainsensorqty
+RAIN_GPIO="drv:rainsensorqty:25"	# Physical 22 - wPi 6
+
+# Valore in ingresso sul gpio definito in RAIN_GPIO che indica lo stato di pioggia
+# variabile usata anche da drv:rainsensorqty, se e' a 1, significa che il reed contact e' collegato ad un circuito pull-down, vuol dire che attende l'impulso a 1 per contare le vaschette, normalmente e' a 0.
+# se e' a 0, significa che il reed contact e' collegato ad un circuito pull-up, vuol dire che attende l'impulso a 0 per contare le vaschette, normalmente e' a 0.
+RAIN_GPIO_STATE=0
+
+RAINSENSORQTY_LOOPSFORSETRAINING=16 # dopo 16 impulsi, 16 vaschette riempite si considera pioggia
+RAINSENSORQTY_SECSBETWEENRAINEVENT=10800 # =3h, significa che dopo 3 ore si resetta il numero di vaschette riempire e solo dopo un nuovo ciclo di riempimento si considera una nuova pioggia
+
+RAINSENSORQTY_MMEACH=0.33 # see RAINSENSORQTY driver readme for details

drv/rainsensorqty/config.include.sh

@@ -0,0 +1,66 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "config.include.sh"
+# specific driver config file
+# Version: 0.2.5
+# Data: 08/Jan/2020
+
+export TMPDIR=/tmp
+
+RAINSENSOR_DEBOUNCE=0.3 # 0.3 seconds for manage debounce of reed contact
+
+RAINSENSORQTY_verbose="yes" # yes/no
+
+RAINSENSORQTY_LASTRAIN="$STATUS_DIR/rainsensorqty_lastrain"
+RAINSENSORQTY_HISTORY="$STATUS_DIR/rainsensorqty_history"
+RAINSENSORQTY_HISTORYRAW="$STATUS_DIR/rainsensorqty_history.raw"
+RAINSENSORQTY_HISTORYTMP="$TMPDIR/rainsensorqty_history.tmp"
+
+RAINSENSORQTY_MONITORLOG="$DIR_SCRIPT/log/rainsensorqty_monitor.log"
+
+RAINSENSORQTY_MONPID="$TMPDIR/rainsensorqty_monitor.pid"
+RAINSENSORQTY_STATE="$TMPDIR/rainsensorqty_state"
+RAINSENSORQTY_STATE_HIST="$TMPDIR/rainsensorqty_state.history"
+
+RAINSENSORQTY_DIR="$DIR_SCRIPT/drv/rainsensorqty"
+
+monitor_sh="$RAINSENSORQTY_DIR/drv_rainsensorqty_monitor.sh"
+
+# internal gpio resistor, 3 values: pull-up, pull-down, none
+# pull-up/down if rain gauge is connected directly to raspberry
+# none if connected through an optocoupler circuit
+GPIO_RESISTOR="pull-up" #pull-up|pull-down|none
+
+#rising means waiting for 1 status (from 0)
+#falling means waiting for 0 status (from 1)
+#RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+#RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+(( RAIN_GPIO_STATE == 1 )) && RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+(( RAIN_GPIO_STATE == 0 )) && RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+
+
+config_check()
+{
+	var2check="RAINSENSOR_DEBOUNCE RAINSENSORQTY_verbose RAINSENSORQTY_LASTRAIN RAINSENSORQTY_HISTORY RAINSENSORQTY_MONITORLOG RAINSENSORQTY_MONPID RAINSENSORQTY_DIR monitor_sh"
+	for var in $var2check
+	do
+		#${!a}
+		if [[ -z ${!var} ]] ; then
+			echo "ERROR: \$$var not set"
+			exit 1 
+		fi
+	done
+	if [[ -z $RAINSENSORQTY_PULSE ]] ; then
+		echo "ERROR: RAIN_GPIO_STATE not set in piGarden.conf"
+		exit 1
+	fi
+	return 0
+	case $GPIO_RESISTOR in
+		pull-up|pull-down|none) return 0 ;;
+		*) echo "ERROR: GPIO_RESISTOR not set correctly - values are \"pull-up|pull-down|none\" "
+			exit 1
+			;;
+	esac
+}
+

drv/rainsensorqty/drv_rainsensorqty_monitor.sh

@@ -0,0 +1,88 @@
+#!/bin/bash
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "drv_rainsensorqty_monitor.sh"
+# monitor script
+# Version: 0.2.5b
+# Data: 12/May/2020
+
+resetcounter()
+{
+        (( counter = 0 ))
+        drv_rainsensorqty_writelog $f "SIGUSR1 received after last PULSE - counter resetted" & 
+        echo "SIGUSR1 received after last PULSE - counter resetted"
+}
+
+###############
+#    MAIN     #
+###############
+
+trap "resetcounter" SIGUSR1
+
+
+DIRNAME="$( dirname $0 )"
+f="$(basename $0)"
+. $DIRNAME/common.include.sh
+
+RAINSENSORQTY_VAR=$TMPDIR/.rainsensorqty_var
+
+if [[ -f "$RAINSENSORQTY_VAR" ]] ; then
+	en_echo "NORMAL: file $RAINSENSORQTY_VAR found - getting variables"
+	. "$RAINSENSORQTY_VAR"
+else
+	echo "ERROR: $RAINSENSORQTY_VAR not found"
+	exit 1
+fi
+
+#drvt="$( echo $RAIN_GPIO | $CUT -f 1 -d: )"
+#drv="$( echo $RAIN_GPIO | $CUT -f 2 -d: )"
+gpio_port="$( echo $RAIN_GPIO | $CUT -f 3 -d: )"
+
+# check if no other rain monitor process running...
+if [[ -f "$RAINSENSORQTY_MONPID" ]] ; then
+	pid="$( < "$RAINSENSORQTY_MONPID" )"
+	if ps -fp $pid >/dev/null ; then
+		drv_rainsensorqty_writelog $f "ERROR monitor process already running\n$( ps -fp $pid )"
+		exit 1
+	fi
+fi
+
+echo $$ > $RAINSENSORQTY_MONPID
+drv_rainsensorqty_writelog $f "NORMAL - $$ pid monitor process started - see $RAINSENSORQTY_MONPID"
+
+# init variables
+MMEACH="$RAINSENSORQTY_MMEACH"
+(( counter=0 ))
+rain_history
+
+echo ""
+en_echo "---- NEW RUN ----"
+en_echo "WAITING FOR $RAINSENSORQTY_PULSE PULSE" 
+
+# loop forever
+while true
+do
+	before=`date +%s`
+	sleep $RAINSENSOR_DEBOUNCE
+	$GPIO -g wfi $gpio_port $RAINSENSORQTY_PULSE
+	now=`date +%s`
+	(( elapsed = now - before ))
+	if (( elapsed >= RAINSENSORQTY_SECSBETWEENRAINEVENT )) ; then
+		(( counter=0 ))
+		drv_rainsensorqty_writelog $f "first drops after $elapsed seconds since last rain ( greater than $RAINSENSORQTY_SECSBETWEENRAINEVENT )- new cycle - waiting for $( $JQ -n "$RAINSENSORQTY_LOOPSFORSETRAINING * $MMEACH" ) mm of rain" &
+		en_echo "---- NEW CYCLE ----"
+		rain_history &
+	fi
+  	(( counter+=1 ))
+	echo "$now:$counter" >> ${RAINSENSORQTY_HISTORYRAW} &
+	MMWATER=$( $JQ -n "$counter*$MMEACH" )
+	en_echo $( printf "%s PULSE #%d RECEIVED (%.2f mm)" $RAINSENSORQTY_PULSE $counter $MMWATER )
+	text=$(printf "%.2f mm height (#%d pulse)" $MMWATER $counter )
+	if (( counter >= RAINSENSORQTY_LOOPSFORSETRAINING )) ; then 
+		drv_rainsensorqty_writelog $f "RAINING - $text" &
+		echo "$now:$counter" > ${RAINSENSORQTY_LASTRAIN} 
+	else
+		drv_rainsensorqty_writelog $f "now is $text" &
+	fi
+done

drv/rainsensorqty/init.include.sh

@@ -0,0 +1,37 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "init.include.sh"
+# Inizializza il driver, viene richiamata nella funzione init di piGarden
+# Version: 0.2.0
+# Data: 11/Aug/2019
+
+function drv_rainsensorqty_init {
+	local f="drv_rainsensorqty_init"
+
+	# format RAIN_GPIO="drv:rainsensorqty:25" 
+
+	drv_rainsensorqty_writelog $f "NORMAL: executing $monitor_sh"
+
+	# esegue rainmonitor 
+	if [ -x "$monitor_sh" ] ; then
+       		nohup "$monitor_sh" >> $RAINSENSORQTY_MONITORLOG 2>&1 &
+               	sleep 1
+		drv_rainsensorqty_writelog $f "NORMAL: $monitor_sh has pid $( < $RAINSENSORQTY_MONPID)"
+	else 
+		drv_rainsensorqty_writelog $f "ERROR: cannot find \"\$monitor_sh \" "
+	fi
+}
+
+if ! config_check ; then
+	echo "ERROR in config_check function" 
+	exit 1
+else
+	: #echo "config_check ok"
+fi
+
+check_TMPDIR
+
+RAINSENSORQTY_VAR=$TMPDIR/.rainsensorqty_var
+
+set | $GREP -e ^GPIO -e ^LOG -e ^CUT -e ^JQ -e ^RAIN -e ^SCR -e ^TMP > $RAINSENSORQTY_VAR

drv/rainsensorqty/rainsensor.include.sh

@@ -0,0 +1,104 @@
+#
+# Driver rainsensorqty - driver for measure the rain volume, for rain meter, for rain gauge
+# Author: androtto
+# file "rainsensor.include.sh"
+# functions called by piGarden.sh
+# Version: 0.1.2
+# Data: 19/Mar/2019
+# fixed output drv_rainsensorqty_rain_sensor_get
+
+#
+# Inizializza il sensore di rilevamento pioggia 
+#
+# $1 	identificativo gpio del sensore di pioggia
+#
+drv_rainsensorqty_rain_sensor_init()
+{
+	local f=drv_rainsensorqty_rain_sensor_init
+	drv_rainsensorqty_writelog "launched: $f" $1 
+
+	local drvt="$( echo $RAIN_GPIO | $CUT -f 1 -d: )"
+	local drv="$( echo $RAIN_GPIO | $CUT -f 2 -d: )"
+	local gpio_port="$( echo $RAIN_GPIO | $CUT -f 3 -d: )"
+
+	if $GPIO -g mode $gpio_port in ; then
+		drv_rainsensorqty_writelog $f "NORMAL: '$GPIO -g mode $gpio_port in' set correctly"
+	else
+		drv_rainsensorqty_writelog $f "ERROR: '$GPIO -g mode $gpio_port in' has an error"
+		exit 1
+	fi
+
+	case $GPIO_RESISTOR in 
+		pull-up)   gpio_arg=up 
+			   message="NORMAL: '$GPIO -g mode $gpio_port up' set internal pull-up resistor"
+			;;
+		pull-down) gpio_arg=down
+			   message="NORMAL: '$GPIO -g mode $gpio_port down' set internal pull-down resistor"
+			;;
+		none)      gpio_arg=tri
+			   message="NORMAL: '$GPIO -g mode $gpio_port tri' set none to internal resistor"
+			;;
+		*) echo "ERROR: GPIO_RESISTOR not set correctly - values are \"pull-up|pull-down|none\" "
+			drv_rainsensorqty_writelog "drv_rainsensorqty_rain_sensor_init" "ERROR: GPIO_RESISTOR not set correctly - values are \"pull-up|pull-down|none\" "
+			exit 1
+			;;
+	esac
+	if $GPIO -g mode $gpio_port $gpio_arg ; then
+		drv_rainsensorqty_writelog $f "$message"
+	else
+		drv_rainsensorqty_writelog $f "ERROR: '$GPIO -g mode $gpio_port $gpio_arg' command"
+		exit 1
+	fi
+}
+
+#
+# Ritorna in output lo stato del sensore di rilevamento pioggia 
+#
+# $1 	identificativo gpio del sensore di pioggia
+#
+# restituisce 0 se piove, e nell'output di testo il valore di "$RAIN_GPIO_STATE"
+# restituisce 99 se non piove, output "norain"
+# esce con 1 se non c'e' il monitoring, output "ERROR"
+drv_rainsensorqty_rain_sensor_get()
+{
+	local now=$(date +%s)
+	local interval=60 #   because check_rain_sensor is scheduled once a minute ... to changed if schedule is modified, from crontab:
+	#* * * * * /home/pi/piGarden/piGarden.sh check_rain_sensor 2> /tmp/check_rain_sensor.err
+
+ 	local f="drv_rainsensorqty_check"
+	
+	# script called with:	
+	#drv_rainsensorqty_writelog $f $1
+	# ignora il parametro di $1, lo recupera dal file di configurazione
+
+	# verifica se lo script di monitoring e' attivo
+	if drv_rainsensorqty_check ; then
+ 		drv_rainsensorqty_writelog $f "NORMAL - drv_rainsensorqty_check ok, monitor process running"
+		if [ -f "$RAINSENSORQTY_LASTRAIN" ] ; then
+			local lastrain="$( cat "$RAINSENSORQTY_LASTRAIN" | $CUT -f 1 -d: )"
+			local counter="$( cat "$RAINSENSORQTY_LASTRAIN" | $CUT -f 2 -d: )"
+		        LEVEL=$( $JQ -n "$counter/$RAINSENSORQTY_LOOPSFORSETRAINING" | $JQ 'floor' )
+		        (( diff = now - lastrain ))
+			drv_rainsensorqty_writelog $f "NORMAL: last rain $( date --date="@$lastrain"  ) - LEVEL $LEVEL rain"
+			drv_rainsensorqty_writelog $f "NORMAL: check rain $( date --date="@$now"  ) "
+			if (( diff <= interval )) ; then
+				drv_rainsensorqty_writelog $f "RAIN - return \$RAIN_GPIO_STATE = $RAIN_GPIO_STATE as output"
+				drv_rainsensorqty_writelog $f "DEBUG : check rain - diff $diff < $interval - return $RAIN_GPIO_STATE"
+				msg="$RAIN_GPIO_STATE" 
+				echo $msg
+				return 0
+			else 
+				drv_rainsensorqty_writelog $f "NO_RAIN - return \"norain\" as output"
+				drv_rainsensorqty_writelog $f "DEBUG : check rain - diff $diff < $interval - return 99"
+				msg="norain"
+				echo $msg
+				return 99
+			fi
+		fi
+	else
+ 		drv_rainsensorqty_writelog $f "ERROR: drv_rainsensorqty_check failed, no monitor process running ($monitor_sh)"
+		msg="ERROR"
+		echo $msg
+		return 1
+	fi	
+}

drv/remote/README.md

@@ -0,0 +1,14 @@
+# Driver for controlling remote pigarden on the network from a pigarden master installation
+
+For more information see https://www.lejubila.net/2018/03/pigardent-0-5-5-driver-master-per-implementare-un-architettura-master-slave/
+
+# Example of zone configuration in piGarden.conf
+```bash
+EV1_ALIAS="Giarino_Posteriore_DX" #
+EV1_GPIO="drv:remote:PIREMOTE1:Giardino_Posteriore_DX"
+
+PIREMOTE1_IP="192.168.1.51"
+PIREMOTE1_PORT="8084"
+PIREMOTE1_USER=""
+PIREMOTE1_PWD=""
+```

drv/remote/common.include.sh

@@ -0,0 +1,38 @@
+#
+# Funzioni comuni utilizzate dal driver
+#
+
+#
+# Esegue un comando su un pigarden remoto tramite socket
+#
+# $1	identificativo pigarden remoto
+# $2	comando da eseguire
+#
+function drv_remote_command {
+
+	local remote="$1"
+	local command="$2"
+
+	local remote_ip_var=$remote"_IP"
+	local remote_port_var=$remote"_PORT"
+	local remote_user_var=$remote"_USER"
+	local remote_pwd_var=$remote"_PWD"
+
+	local remote_ip="${!remote_ip_var}"
+	local remote_port="${!remote_port_var}"
+	local remote_user="${!remote_user_var}"
+	local remote_pwd="${!remote_pwd_var}"
+
+	exec 5<>/dev/tcp/$remote_ip/$remote_port
+	
+	if [[ ! -z $remote_user ]] && [[ ! -z $remote_pwd ]]; then
+		command="$remote_user\n$remote_pwd\n$command"
+	fi
+
+	echo -e "$command" >&5
+
+	cat <&5
+
+}
+
+

drv/remote/config.include.sh

@@ -0,0 +1,7 @@
+#
+# File di configurazione del driver
+# 
+
+# Dichiarazione variabile di esempio
+#declare -g SAMPLE_FOO
+#SAMPLE_FOO="bar"

drv/remote/init.include.sh

@@ -0,0 +1,9 @@
+#
+# Questa funzione viene inviocata dalla funzione "init" di piGarden se sono presenti elettrovalvole o sensori che utilizzano questo driver
+#
+function drv_remote_init {
+
+	local FOO=bar
+
+}
+

drv/remote/rainsensor.include.sh

@@ -0,0 +1,23 @@
+#
+# Inizializza il sensore di rilevamento pioggia 
+#
+# $i 	identificativo gpio del sensore di pioggia
+#
+function drv_remote_rain_sensor_init {
+
+	local FOO="bar"
+
+}
+
+#
+# Ritorna lo stato del sensore di rilevamento pioggia 
+#
+# $i 	identificativo gpio del sensore di pioggia
+#
+function drv_remote_rain_sensor_get {
+
+	local FOO="bar"
+
+}
+
+

drv/remote/rele.include.sh

@@ -0,0 +1,76 @@
+#
+# Inizializzazione rele 
+#
+# $1 identificativo relè da inizializzare
+#
+function drv_remote_rele_init {
+
+	drv_remote_rele_open "$1"
+}
+
+#
+# Apertura rele 
+#
+# $1 identificativo relè da aprire (chiude l'elettrovalvola)
+#
+function drv_remote_rele_open {
+
+	local remote=`echo $1 | $CUT -d':' -f3,3`
+	local remote_alias=`echo $1 | $CUT -d':' -f4,4`
+
+	local command="close $remote_alias"
+
+	echo "remote=$remote"
+	echo "remote_alias=$remote_alias"
+	echo "command=$command"
+
+	local response=$(drv_remote_command "$remote" "$command")
+
+	echo "response=$response"
+
+	local result=$(echo $response|$JQ -M ".error.description")
+	echo "result=$result"
+	if [[ "$result" != "\"\"" ]]; then
+		local error=$result
+		error="${error%\"}"
+		error="${error#\"}"
+		echo "error=$error"
+	        log_write "drv_remote" "error" "Remote rele open error: $error"
+        	message_write "warning" "Remote rele open error: $error"
+		return 1
+	fi
+}
+
+#
+# Chiusura rele 
+#
+# $1 identificativo relè da chiudere (apre l'elettrovalvola)
+#
+function drv_remote_rele_close {
+
+	local remote=`echo $1 | $CUT -d':' -f3,3`
+	local remote_alias=`echo $1 | $CUT -d':' -f4,4`
+
+	local command="open $remote_alias force"
+
+	echo "remote=$remote"
+	echo "remote_alias=$remote_alias"
+	echo "command=$command"
+
+	local response=$(drv_remote_command "$remote" "$command")
+
+	echo "response=$response"
+
+	local result=`echo $response|$JQ -M ".error.description"`
+	echo "result=$result"
+	if [[ "$result" != "\"\"" ]]; then
+		local error=$result
+		error="${error%\"}"
+		error="${error#\"}"
+		echo "error=$error"
+	        log_write "drv_remoter" "error" "Remote rele close error: $error"
+        	message_write "warning" "Remote rele close error: $error"
+		return 1
+	fi
+}
+

drv/remote/setup.include.sh

@@ -0,0 +1,27 @@
+#
+# Questa funzione viene invocata dalla funzione "setup_drv" di piGarden ad ogni avvio dello script
+# e serve per eseguire l'eventuale setup del driver se necessario
+#
+function drv_remote_setup {
+
+	local all_remote=0
+
+        # Imposta le zone come remote 
+        for i in $(seq $EV_TOTAL)
+        do
+                local a=EV"$i"_GPIO
+                local gpio="${!a}"
+                if [[ "$gpio" == drv:remote:* ]]; then
+		        local varname=EV"$i"_REMOTE
+			declare -g $varname=1
+			all_remote=$((all_remote+1))
+		fi
+        done
+
+	# Se tutte le zone sono remote disabilita la gestione dell'alimentazione bistabile
+	if [ $all_remote -eq $EV_TOTAL ]; then
+		EV_MONOSTABLE=1
+	fi
+
+}
+

drv/remote/supply.include.sh

@@ -0,0 +1,34 @@
+#
+# Inizializza i rele che gestiscono l'alimentazione per le valvole bistabili
+#
+# $1    identificativo relè 
+#
+function drv_remote_supply_bistable_init {
+
+	local FOO="bar"
+
+}
+
+#
+# Imposta l'alimentazione delle elettrovalvole con voltaggio positivo 
+#
+# $1    identificativo relè 
+#
+function drv_remote_supply_positive {
+
+	local FOO="bar"
+
+}
+
+#
+# Imposta l'alimentazione delle elettrovalvole con voltaggio negativo
+#
+# $1    identificativo relè 
+#
+function drv_remote_supply_negative {
+
+	local FOO="bar"
+
+}
+
+

drv/sample/common.include.sh

@@ -5,7 +5,7 @@
 #
 # Funzione di esempio
 #
-function sample_foo {
+function drv_sample_foo {
 
 	echo "bar"
 

drv/sample/rainonline.include.sh

@@ -0,0 +1,13 @@
+#
+# Ritorna lo stato delle condizioni meteo interrogando il servizio online 
+#
+# return output:	0  - errore durante il recupero delle condizioni meteo 
+#			>0 - rilevato pioggia, timestamp del rilevamento
+#			<0 - rilevato nessuna pioggia, timestamp del rilevamento
+function drv_sample_rain_online_get {
+
+	local FOO="bar"
+
+}
+
+

drv/sample/setup.include.sh

@@ -1,6 +1,6 @@
 #
 # Questa funzione viene invocata dalla funzione "setup_drv" di piGarden ad ogni avvio dello script
-# e serve per eseguire l'evenutale setup del driver se necessario
+# e serve per eseguire l'eventuale setup del driver se necessario
 #
 function drv_sample_setup {
 

drv/sonoff_tasmota_http/README.md

@@ -0,0 +1,22 @@
+# Driver for controlling Sonoff remote relays with Tasmota firmware via http protocol
+
+More information on Sonoff Tasmota firmware: https://github.com/arendst/Sonoff-Tasmota
+
+
+# Example of zone configuration in piGarden.conf
+
+```bash
+EV1_ALIAS="Giardino_Posteriore_DX"
+EV1_GPIO="drv:sonoff_tasmota_http:SONOFF1:Power1"
+EV1_MONOSTABLE=1
+
+EV2_ALIAS="Giardino_Posteriore_CN"
+EV2_GPIO="drv:sonoff_tasmota_http:SONOFF1:Power2"
+EV2_MONOSTABLE=1
+
+SONOFF1_IP="192.168.1.1"
+SONOFF1_USER="user"
+SONOFF1_PWD="pwd"
+```
+More information for configuration: https://www.lejubila.net/2018/06/pigarden-0-5-7-gestisci-le-tue-elettrovalvole-con-i-moduli-sonoff-grazie-al-nuovo-driver-sonoff_tasmota_http
+

drv/sonoff_tasmota_http/common.include.sh

@@ -0,0 +1,50 @@
+#
+# Funzioni comuni utilizzate dal driver
+#
+
+#
+# Invia un comando al modulo sonoff tramite http
+#
+# $1	identificativo modulo sonoff
+# $2	comando da eseguire
+#
+function drv_sonoff_tasmota_http_command {
+
+	local remote="$1"
+	local command="$2"
+
+	local remote_ip_var=$remote"_IP"
+	local remote_user_var=$remote"_USER"
+	local remote_pwd_var=$remote"_PWD"
+
+	local remote_ip="${!remote_ip_var}"
+	local remote_user="${!remote_user_var}"
+	local remote_pwd="${!remote_pwd_var}"
+
+	local url="http://$remote_ip/cm"
+	local credentials=""
+	local response=""
+
+	if [[ ! -z $remote_user ]] && [[ ! -z $remote_pwd ]]; then
+		credentials="user=$remote_user&password=$remote_pwd&"
+	fi
+
+	url="$url?$credentials$command"
+
+	echo "url api sonoff: $url" >> "$LOG_OUTPUT_DRV_FILE"
+
+	$CURL --connect-timeout 5 -sb -H "$url"
+
+	local res=$?
+
+	echo "curl code response: $res" >> "$LOG_OUTPUT_DRV_FILE"
+
+	if [ "$res" != "0" ]; then
+		echo "The curl command failed with: $res - url: $url"
+	fi
+
+	#echo "{\"POWER1\":\"ON\"}"
+
+}
+
+

drv/sonoff_tasmota_http/config.include.sh

@@ -0,0 +1,7 @@
+#
+# File di configurazione del driver
+# 
+
+# Dichiarazione variabile di esempio
+#declare -g SAMPLE_FOO
+#SAMPLE_FOO="bar"

drv/sonoff_tasmota_http/init.include.sh

@@ -0,0 +1,9 @@
+#
+# Questa funzione viene inviocata dalla funzione "init" di piGarden se sono presenti elettrovalvole o sensori che utilizzano questo driver
+#
+function drv_sonoff_tasmota_http_init {
+
+	local FOO=bar
+
+}
+

drv/sonoff_tasmota_http/rainsensor.include.sh

@@ -0,0 +1,23 @@
+#
+# Inizializza il sensore di rilevamento pioggia 
+#
+# $i 	identificativo gpio del sensore di pioggia
+#
+function drv_sonoff_tasmota_http_rain_sensor_init {
+
+	local FOO="bar"
+
+}
+
+#
+# Ritorna lo stato del sensore di rilevamento pioggia 
+#
+# $i 	identificativo gpio del sensore di pioggia
+#
+function drv_sonoff_tasmota_http_rain_sensor_get {
+
+	local FOO="bar"
+
+}
+
+

drv/sonoff_tasmota_http/rele.include.sh

@@ -0,0 +1,78 @@
+#
+# Inizializzazione rele 
+#
+# $1 identificativo relè da inizializzare
+#
+function drv_sonoff_tasmota_http_rele_init {
+	drv_sonoff_tasmota_http_rele_open "$1"
+}
+
+#
+# Apertura rele 
+#
+# $1 identificativo relè da aprire (chiude l'elettrovalvola)
+#
+function drv_sonoff_tasmota_http_rele_open {
+
+	local remote=`echo $1 | $CUT -d':' -f3,3`
+	local remote_alias=`echo $1 | $CUT -d':' -f4,4`
+
+	local command="cmnd=$remote_alias%20Off"
+
+	echo "remote=$remote"
+	echo "remote_alias=$remote_alias"
+	echo "command=$command"
+
+	local response=$(drv_sonoff_tasmota_http_command "$remote" "$command")
+
+	echo "response=$response"
+	local jskey=${remote_alias^^}
+
+	local result=$(echo $response|$JQ -M ".$jskey")
+	echo "result=$result"
+	if [[ "$result" != "\"OFF\"" ]]; then
+		local error="Command error: $response"
+		error="${error%\"}"
+		error="${error#\"}"
+		echo "error=$error"
+	        log_write "drv_sonoff_tasmota_http" "error" "Remote rele open error: $error"
+        	message_write "warning" "Remote rele open error: $error"
+		return 1
+	fi
+}
+
+#
+# Chiusura rele 
+#
+# $1 identificativo relè da chiudere (apre l'elettrovalvola)
+#
+function drv_sonoff_tasmota_http_rele_close {
+
+	local remote=`echo $1 | $CUT -d':' -f3,3`
+	local remote_alias=`echo $1 | $CUT -d':' -f4,4`
+
+	local command="cmnd=$remote_alias%20On"
+
+	echo "remote=$remote"
+	echo "remote_alias=$remote_alias"
+	echo "command=$command"
+
+	local response=$(drv_sonoff_tasmota_http_command "$remote" "$command")
+
+	echo "response=$response"
+	local jskey=${remote_alias^^}
+
+	local result=$(echo $response|$JQ -M ".$jskey")
+	echo "result=$result"
+	if [[ "$result" != "\"ON\"" ]]; then
+		local error="Command error: $response"
+		error="${error%\"}"
+		error="${error#\"}"
+		echo "error=$error"
+	        log_write "drv_sonoff_tasmota_http" "error" "Remote rele close error: $error"
+        	message_write "warning" "Remote rele close error: $error"
+		return 1
+	fi
+
+}
+

drv/sonoff_tasmota_http/setup.include.sh

@@ -0,0 +1,10 @@
+#
+# Questa funzione viene invocata dalla funzione "setup_drv" di piGarden ad ogni avvio dello script
+# e serve per eseguire l'eventuale setup del driver se necessario
+#
+function drv_sonoff_tasmota_http_setup {
+
+	local FOO="bar"
+
+}
+

drv/sonoff_tasmota_http/supply.include.sh

@@ -0,0 +1,34 @@
+#
+# Inizializza i rele che gestiscono l'alimentazione per le valvole bistabili
+#
+# $1    identificativo relè 
+#
+function drv_sonoff_tasmota_http_supply_bistable_init {
+
+	drv_sonoff_tasmota_http_supply_negative "$1"
+
+}
+
+#
+# Imposta l'alimentazione delle elettrovalvole con voltaggio positivo 
+#
+# $1    identificativo relè 
+#
+function drv_sonoff_tasmota_http_supply_positive {
+
+	drv_sonoff_tasmota_http_rele_open "$1"
+
+}
+
+#
+# Imposta l'alimentazione delle elettrovalvole con voltaggio negativo
+#
+# $1    identificativo relè 
+#
+function drv_sonoff_tasmota_http_supply_negative {
+
+	drv_sonoff_tasmota_http_rele_close "$1"
+
+}
+
+

drv/spb16ch/common.include.sh

@@ -74,7 +74,7 @@ function drv_spb16ch_boards_id_load {
 			SPB16CH_USED_ID+=("$board_id")
 		done
 	else
-		log_write "spb16ch: file $SPB16CH_BOARD_ID_STORE_FILE not found: remember to run 'piGarden init' to generate the file"
+		log_write "drv_spb16ch" "error" "spb16ch: file $SPB16CH_BOARD_ID_STORE_FILE not found: remember to run 'piGarden init' to generate the file"
 	fi
 
 }

drv/spb16ch/rele.include.sh

@@ -19,7 +19,7 @@ function drv_spb16ch_rele_open {
 	local rele_data=${SPB16CH_RELE_MAP[$rele_id]}
 	if [[ -z $rele_data ]]; then
 		local message="Error - Rele map not defined - rele_id=$rele_id - ($1)"
-		log_write "$message"
+		log_write "drv_spb16ch" "error" "$message"
 		message_write "warning" "$message"
 	fi
 	local address_num=${rele_data:0:2}
@@ -52,7 +52,7 @@ function drv_spb16ch_rele_close {
 	local rele_data=${SPB16CH_RELE_MAP[$rele_id]}
 	if [[ -z $rele_data ]]; then
 		local message="Error - Rele map not defined - rele_id=$rele_id - ($1)"
-		log_write "$message"
+		log_write "drv_spb16ch" "error" "$message"
 		message_write "warning" "$message"
 	fi
 	local address_num=${rele_data:0:2}

drv/wunderground/README.md

@@ -0,0 +1,12 @@
+# Driver for check wather condition with wunderground online service
+
+# Example of configuration in piGarden.conf
+
+```bash
+WEATHER_SERVICE="wunderground"
+
+WUNDERGROUND_KEY=""			# Set with your api key of wunderground
+WUNDERGROUND_LOCATION="IY/Monsummano"	# Set with your location indentify, see http://www.wunderground.com/weather/api/d/docs?d=resources/country-to-iso-matching&MR=1 
+```
+
+

drv/wunderground/common.include.sh

@@ -0,0 +1,12 @@
+#
+# Funzioni comuni utilizzate dal driver
+#
+
+#
+# Funzione di esempio
+#
+function sample_foo {
+
+	echo "bar"
+
+}

drv/wunderground/rainonline.include.sh

@@ -0,0 +1,36 @@
+#
+# Ritorna lo stato delle condizioni meteo interrogando il servizio online 
+#
+# $i 	identificativo gpio del sensore di pioggia
+#
+# return output:	0  - errore durante il recupero delle condizioni meteo 
+#			>0 - rilevato pioggia, timestamp del rilevamento
+#			<0 - rilevato nessuna pioggia, timestamp del rilevamento
+function drv_wunderground_rain_online_get {
+
+	# http://www.wunderground.com/weather/api/d/docs?d=resources/phrase-glossary&MR=1
+	$CURL http://api.wunderground.com/api/$WUNDERGROUND_KEY/conditions/q/$WUNDERGROUND_LOCATION.json > $TMP_PATH/check_rain_online.json
+	local weather=`cat $TMP_PATH/check_rain_online.json | $JQ -M ".current_observation.weather"`
+	local current_observation=`cat $TMP_PATH/check_rain_online.json | $JQ -M ".current_observation"`
+	local local_epoch=`cat $TMP_PATH/check_rain_online.json | $JQ -M -r ".current_observation.local_epoch"`
+
+	if [ "$weather" = "null" ]; then
+		echo "0"
+	else
+		if 	[[ "$weather" == *"Rain"* ]] || 
+		 	[[ "$weather" == *"Snow"* ]] || 
+	 		[[ "$weather" == *"Hail"* ]] || 
+			[[ "$weather" == *"Ice"* ]] || 
+			[[ "$weather" == *"Thunderstorm"* ]] || 
+			[[ "$weather" == *"Drizzle"* ]]; 
+		then
+			echo $local_epoch
+		else
+			echo "-$local_epoch"
+		fi
+		echo "$current_observation" > "$STATUS_DIR/last_weather_online"
+	fi
+
+}
+
+

events/cron_add_after/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/cron_add_before/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/cron_del_after/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/cron_del_before/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/ev_not_open_for_rain/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/ev_not_open_for_rain_online/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/ev_not_open_for_rain_sensor/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/ev_open_in_after/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/ev_open_in_before/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/exec_poweroff_after/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/exec_poweroff_before/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/exec_reboot_after/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/exec_reboot_before/.gitignore

@@ -0,0 +1,4 @@
+# Ignore everything in this directory
+*
+# Except this file
+!.gitignore

events/scripts/rpinotify.sh

@@ -0,0 +1,111 @@
+#!/bin/bash
+#
+# Send telegram notificacion on triggered event
+#
+# $1 = event
+# $2 = cause
+# $3 = time
+#
+# To use this script, you must get your hash. Register for the rpinotify service. Get the hash and enter it below
+#
+
+# rpinotify token
+TOKEN=""
+
+EVENT="$1"
+
+TO="mail@destination.com"
+FROM="piGarden@your_domain.com"
+SUBJECT="[piGarden notification mail] event $EVENT"
+BODY=""
+
+case "$EVENT" in
+	"init_before" | "init_after")
+		TIME=$2
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- TIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"ev_open_before" | "ev_open_after")
+		ALIAS="$2"
+		FORCE="$3"
+		TIME=$4
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- ZONE: $ALIAS --- FORCED IRRIGATION: $FORCE --- TIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"ev_open_in_before")
+		ALIAS="$2"
+		FORCE="$3"
+		MINUTE_START="$4"
+		MINUTE_STOP="$5"
+		TIME=$6
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- ZONE: $ALIAS --- FORCED IRRIGATION: $FORCE --- MINUTE START: $MINUTE_START --- MINUTE STOP: $MINUTE_STOP --- TIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"ev_open_in_after")
+		ALIAS="$2"
+		FORCE="$3"
+		CRON_START="$4"
+		CRON_STOP="$5"
+		TIME=$6
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- ZONE: $ALIAS --- FORCED IRRIGATION: $FORCE --- CRON START: $CRON_START --- CRON STOP: $CRON_STOP --- TIME: $(/bin/date -d@$TIME)"
+		;;
+
+
+	"ev_close_before" | "ev_close_after")
+		ALIAS="$2"
+		TIME=$3
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- ZONE: $ALIAS --- TIME: $(/bin/date -d@$TIME);"
+		;;
+
+	"ev_not_open_for_rain" | "ev_not_open_for_rain_online" | "ev_not_open_for_rain_sensor")
+		ALIAS="$2"
+		TIME=$3
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- ZONE: $ALIAS --- TIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"check_rain_sensor_before" | "check_rain_sensor_after" | "check_rain_sensor_change")
+		STATE="$2"
+		TIME=$3
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- STATE: $STATE --- TIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"check_rain_online_before")
+		STATE="$2"
+		TIME=$3
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- STATE: $STATE --- TIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"check_rain_online_after" | "check_rain_online_change")
+		STATE="$2"
+		WEATHER="$3"
+		TIME=$4
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- STATE: $STATE --- WEATHER: $WEARTHER --- TIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"cron_add_before" | "cron_add_after")
+		CRON_TYPE="$2"
+		CRON_ARG="$3"
+		CRON_ELEMENT="$4"
+		TIME=$5
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- CRON TYPE: $CRON_TYPE --- CRON ARG: $CRON_ARG --- CRON ELEMENT: $CRON_ELEMENT\nTIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"cron_del_before" | "cron_del_after")
+		CRON_TYPE="$2"
+		CRON_ARG="$3"
+		TIME=$4
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- CRON TYPE: $CRON_TYPE --- CRON ARG: $CRON_ARG --- TIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"exec_poweroff_before" | "exec_poweroff_after" | "exec_reboot_before" | "exec_reboot_after")
+		TIME=$2
+		BODY="PiGarden triggered new event --- EVENT: $EVENT --- TIME: $(/bin/date -d@$TIME)"
+		;;
+
+	*)
+		exit
+		;;
+
+esac
+
+curl -X POST -F "text=$BODY" https://api.rpinotify.it/message/$TOKEN/

events/scripts/sendmail.sh

@@ -24,13 +24,12 @@ EVENT="$1"
 
 TO="mail@destination.com"
 FROM="piGarden@your_domain.com"
-SUBJECT="piGarden notification mail: event $EVENT"
+SUBJECT="[piGarden notification mail] event $EVENT"
 BODY=""
 
 case "$EVENT" in
 	"init_before" | "init_after")
-		STATE="$2"
+		TIME=$2
-		TIME=$3
 		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nTIME: $(/bin/date -d@$TIME)"
 		;;
 
@@ -41,22 +40,74 @@ case "$EVENT" in
 		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nZONE: $ALIAS\nFORCED IRRIGATION: $FORCE\nTIME: $(/bin/date -d@$TIME)"
 		;;
 
+	"ev_open_in_before")
+		ALIAS="$2"
+		FORCE="$3"
+		MINUTE_START="$4"
+		MINUTE_STOP="$5"
+		TIME=$6
+		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nZONE: $ALIAS\nFORCED IRRIGATION: $FORCE\nMINUTE START: $MINUTE_START\nMINUTE STOP: $MINUTE_STOP\nTIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"ev_open_in_after")
+		ALIAS="$2"
+		FORCE="$3"
+		CRON_START="$4"
+		CRON_STOP="$5"
+		TIME=$6
+		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nZONE: $ALIAS\nFORCED IRRIGATION: $FORCE\nCRON START: $CRON_START\nCRON STOP: $CRON_STOP\nTIME: $(/bin/date -d@$TIME)"
+		;;
+
+
 	"ev_close_before" | "ev_close_after")
 		ALIAS="$2"
 		TIME=$3
 		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nZONE: $ALIAS\nTIME: $(/bin/date -d@$TIME)"
 		;;
 
+	"ev_not_open_for_rain" | "ev_not_open_for_rain_online" | "ev_not_open_for_rain_sensor")
+		ALIAS="$2"
+		TIME=$3
+		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nZONE: $ALIAS\nTIME: $(/bin/date -d@$TIME)"
+		;;
+
 	"check_rain_sensor_before" | "check_rain_sensor_after" | "check_rain_sensor_change")
 		STATE="$2"
 		TIME=$3
-		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nSTATE: $ALIAS\nTIME: $(/bin/date -d@$TIME)"
+		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nSTATE: $STATE\nTIME: $(/bin/date -d@$TIME)"
 		;;
 
-	"check_rain_online_before" | "check_rain_online_after" | "check_rain_online_change")
+	"check_rain_online_before")
 		STATE="$2"
 		TIME=$3
-		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nSTATE: $ALIAS\nTIME: $(/bin/date -d@$TIME)"
+		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nSTATE: $STATE\nTIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"check_rain_online_after" | "check_rain_online_change")
+		STATE="$2"
+		WEATHER="$3"
+		TIME=$4
+		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nSTATE: $STATE\nWEATHER: $WEARTHER\nTIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"cron_add_before" | "cron_add_after")
+		CRON_TYPE="$2"
+		CRON_ARG="$3"
+		CRON_ELEMENT="$4"
+		TIME=$5
+		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nCRON TYPE: $CRON_TYPE\nCRON ARG: $CRON_ARG\nCRON ELEMENT: $CRON_ELEMENT\nTIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"cron_del_before" | "cron_del_after")
+		CRON_TYPE="$2"
+		CRON_ARG="$3"
+		TIME=$4
+		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nCRON TYPE: $CRON_TYPE\nCRON ARG: $CRON_ARG\nTIME: $(/bin/date -d@$TIME)"
+		;;
+
+	"exec_poweroff_before" | "exec_poweroff_after" | "exec_reboot_before" | "exec_reboot_after")
+		TIME=$2
+		BODY="PiGarden triggered new event\n\nEVENT: $EVENT\nTIME: $(/bin/date -d@$TIME)"
 		;;
 
 	*)

include/cron.include.sh

@@ -10,7 +10,7 @@ function cron_del {
 
 	if [ -z "$CRON_TYPE" ]; then
 		echo "Cron type is empty" >&2
-		log_write "Cron type is empty"
+		log_write "cron" "error" "Cron type is empty"
 		return 1
 	fi
 
@@ -25,24 +25,24 @@ function cron_del {
 	fi
 	if ! [[ $START =~ $re ]] ; then
   		echo "Cron start don't find" >&2
-  		log_write "Cron start don't find"
+  		log_write "cron" "error" "Cron start don't find"
 		return 1
 	fi
 	if ! [[ $END =~ $re ]] ; then
   		echo "Cron end cron don't find" >&2
-  		log_write "Cron end cron don't find"
+  		log_write "cron" "error" "Cron end cron don't find"
 		return 1
 	fi
 	if [ "$START" -gt "$END" ]; then
   		echo "Wrong position for start and end in cron" >&2
-  		log_write "Wrong position for start and end in cron"
+  		log_write "cron" "error" "Wrong position for start and end in cron"
 		return 1
 	fi
 
-
+	trigger_event "cron_del_before" "$1" "$2"
 	$SED "$START,${END}d" "$TMP_CRON_FILE" | $SED '$!N; /^\(.*\)\n\1$/!P; D' | $CRONTAB -
-	#$CRONTAB "$TMP_CRON_FILE"
 	rm "$TMP_CRON_FILE"
+	trigger_event "cron_del_after" "$1" "$2"
 
 }
 
@@ -74,7 +74,7 @@ function cron_add {
 
 	if [ -z "$CRON_TYPE" ]; then
 		echo "Cron type is empty" >&2
-		log_write "Cron type is empty"
+		log_write "cron" "error" "Cron type is empty"
 		return 1
 	fi
 
@@ -91,12 +91,12 @@ function cron_add {
 	else
 		if ! [[ $START =~ $re ]] ; then
   			echo "Cron start don't find" >&2
-  			log_write "Cron start don't find"
+  			log_write "cron" "error" "Cron start don't find"
 			return 1
 		fi
 		if ! [[ $END =~ $re ]] ; then
   			echo "Cron end cron don't find" >&2
-  			log_write "Cron end cron don't find"
+  			log_write "cron" "error" "Cron end cron don't find"
 			return 1
 		fi
 		START=$(($START + 1))
@@ -104,7 +104,7 @@ function cron_add {
 
 		if [ "$START" -gt "$END" ]; then
   			echo "Wrong position for start and end in cron" >&2
-  			log_write "Wrong position for start and end in cron"
+  			log_write "cron" "error" "Wrong position for start and end in cron"
 			return 1
 		fi
 		
@@ -183,7 +183,7 @@ function cron_add {
 
 		*)
 			echo "Wrong cron type: $CRON_TYPE"
-			log_write "Wrong cron type: $CRON_TYPE"
+			log_write "cron" "error" "Wrong cron type: $CRON_TYPE"
 			;;
 
 	esac
@@ -206,8 +206,10 @@ function cron_add {
 	echo "$CRON_DISABLED$CRON_M $CRON_H $CRON_DOM $CRON_MON $CRON_DOW $CRON_COMMAND" >> "$TMP_CRON_FILE2"
 	echo "# END cron $CRON_TYPE $CRON_ARG" >> "$TMP_CRON_FILE2"
 
+	trigger_event "cron_add_before" "$CRON_TYPE" "$CRON_ARG" "$CRON_DISABLED$CRON_M $CRON_H $CRON_DOM $CRON_MON $CRON_DOW $CRON_COMMAND"
 	$CRONTAB "$TMP_CRON_FILE2"
 	rm "$TMP_CRON_FILE" "$TMP_CRON_FILE2"
+	trigger_event "cron_add_after" "$CRON_TYPE" "$CRON_ARG" "$CRON_DISABLED$CRON_M $CRON_H $CRON_DOM $CRON_MON $CRON_DOW $CRON_COMMAND"
 
 }
 
@@ -223,7 +225,7 @@ function cron_get {
 
 	if [ -z "$CRON_TYPE" ]; then
 		echo "Cron type is empty" >&2
-		log_write "Cron type is empty"
+		log_write "cron" "error" "Cron type is empty"
 		return 1
 	fi
 
@@ -239,12 +241,12 @@ function cron_get {
 	else
 		if ! [[ $START =~ $re ]] ; then
   			echo "Cron start don't find" >&2
-  			log_write "Cron start don't find"
+  			log_write "cron" "error" "Cron start don't find"
 			return 1
 		fi
 		if ! [[ $END =~ $re ]] ; then
   			echo "Cron end cron don't find" >&2
-  			log_write "Cron end cron don't find"
+  			log_write "cron" "error" "Cron end cron don't find"
 			return 1
 		fi
 		START=$(($START + 1))
@@ -252,7 +254,7 @@ function cron_get {
 
 		if [ "$START" -gt "$END" ]; then
   			echo "Wrong position for start and end in cron" >&2
-  			log_write "Wrong position for start and end in cron"
+  			log_write "cron" "error" "Wrong position for start and end in cron"
 			return 1
 		fi
 		
@@ -368,7 +370,7 @@ function add_cron_open {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -385,7 +387,7 @@ function del_cron_open {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -402,7 +404,7 @@ function get_cron_open {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -419,7 +421,7 @@ function del_cron_open_in {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -437,7 +439,7 @@ function get_cron_close {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -460,7 +462,7 @@ function add_cron_close {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -477,7 +479,7 @@ function del_cron_close {
 
 	local exists=`alias_exists $1`
 	if [ "check $exists" = "check FALSE" ]; then
-		log_write "Alias $1 not found"
+		log_write "cron" "error" "Alias $1 not found"
 		echo "Alias $1 not found"
 		return 1
 	fi
@@ -557,7 +559,79 @@ function cron_disable_all_open_close {
 		fi
 		
         done
-
+}
-
+
-
+
+
+#
+# Attiva tutte le schedulazioni di apertura e chiusura elettrovalvole
+#
+function cron_enable_all_open_close {
+
+	local a=""
+	local al=""
+	local cron=""
+
+	#
+	# Disabilita tutte le schedulazioni di apertura
+	#
+        for i in $(seq $EV_TOTAL)
+        do
+                a=EV"$i"_ALIAS
+                al=${!a}
+                local crons=`get_cron_open $al`
+		if [[ ! -z "$crons" ]]; then
+			del_cron_open $al
+			IFS=$'\n'       # make newlines the only separator
+			for cron in $crons
+			do
+				#echo "-- $cron --"
+				CRON_M=`echo $cron | $CUT -d' ' -f1,1`
+				CRON_H=`echo $cron | $CUT -d' ' -f2,2`
+				CRON_DOM=`echo $cron | $CUT -d' ' -f3,3`
+				CRON_MON=`echo $cron | $CUT -d' ' -f4,4`
+				CRON_DOW=`echo $cron | $CUT -d' ' -f5,5`
+
+				if [[ ${CRON_M:0:1} == "#" ]]; then
+					CRON_M=${CRON_M:1:${#CRON_M}}
+				fi
+				#echo "++ $CRON_M $CRON_H $CRON_DOM $CRON_MON $CRON_DOW ++"
+
+				add_cron_open $al "$CRON_M" "$CRON_H" "$CRON_DOM" "$CRON_MON" "$CRON_DOW"
+			done
+		fi
+		
+        done
+
+
+	#
+	# Disabilita tutte le schedulazioni di chiusura
+	#
+        for i in $(seq $EV_TOTAL)
+        do
+                a=EV"$i"_ALIAS
+                al=${!a}
+                local crons=`get_cron_close $al`
+		if [[ ! -z "$crons" ]]; then
+			del_cron_close $al
+			IFS=$'\n'       # make newlines the only separator
+			for cron in $crons
+			do
+				#echo "-- $cron --"
+				CRON_M=`echo $cron | $CUT -d' ' -f1,1`
+				CRON_H=`echo $cron | $CUT -d' ' -f2,2`
+				CRON_DOM=`echo $cron | $CUT -d' ' -f3,3`
+				CRON_MON=`echo $cron | $CUT -d' ' -f4,4`
+				CRON_DOW=`echo $cron | $CUT -d' ' -f5,5`
+
+				if [[ ${CRON_M:0:1} == "#" ]]; then
+					CRON_M=${CRON_M:1:${#CRON_M}}
+				fi
+				#echo "++ $CRON_M $CRON_H $CRON_DOM $CRON_MON $CRON_DOW ++"
+
+				add_cron_close $al "$CRON_M" "$CRON_H" "$CRON_DOM" "$CRON_MON" "$CRON_DOW"
+			done
+		fi
+		
+        done
 }

include/drv.include.sh

@@ -1,11 +1,15 @@
 declare -a list_drv
 
+#
+# Funzione eseguita ad ogni avvio di piGarden.sh, si occupa includere tutti i file dei driver utilizzati e di lanciare
+# la funzione di setup di ogni driver se esistente
+#
 function setup_drv { 
 
 	#declare -a list_drv
 	list_drv=()
 
-        # Inizializza i driver per le elettrovalvole
+        # Raccoglie i nomi dei driver utilizzati per le elettrovalvole
         for i in $(seq $EV_TOTAL)
         do
                 local a=EV"$i"_GPIO
@@ -18,8 +22,8 @@ function setup_drv {
 		fi
         done
 
-	# Inizializza i driver per gli altri gpio
+	# Raccoglie i nomi dei driver utilizzati per gli altri gpio
-	for gpio in "$SUPPLY_GPIO_1" "$SUPPLY_GPIO_2" "$RAIN_GPIO"
+	for gpio in "$SUPPLY_GPIO_1" "$SUPPLY_GPIO_2" "$RAIN_GPIO" "$WEATHER_SERVICE"
 	do
 		if [[ "$gpio" == drv:* ]]; then
 			local drv=`echo $gpio | $CUT -d':' -f2,2`
@@ -29,10 +33,13 @@ function setup_drv {
 		fi
 	done
 
+	#
+	# Esegue l'unclusione dei file dei driver e per ognuno lancia l'eventuale funzione di setup
+	#
 	local file_drv
 	for drv in "${list_drv[@]}"
 	do
-		for callback in config common init rele supply rainsensor setup
+		for callback in config common init rele supply rainsensor rainonline setup
 		do
 			file_drv="$DIR_SCRIPT/drv/$drv/$callback.include.sh"
 			if [ -f "$file_drv" ]; then
@@ -87,7 +94,7 @@ function drv_rele_init {
                 $GPIO -g mode $idx out                # setta il gpio nella modalita di scrittura
 	# Il driver definito non è stato trovato
 	elif [ "$fnc" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
 	else
 		echo "$(date) $fnc arg:$idx" >> "$LOG_OUTPUT_DRV_FILE"
@@ -109,11 +116,15 @@ function drv_rele_close {
 		$GPIO -g write $idx $RELE_GPIO_CLOSE	
 	# Il driver definito non è stato trovato
 	elif [ "$fnc" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
+		return 1
 	else
 		echo "$(date) $fnc arg:$idx" >> "$LOG_OUTPUT_DRV_FILE"
 		$fnc "$idx" >> "$LOG_OUTPUT_DRV_FILE" 2>&1
+		if [ $? -eq 1 ]; then
+			return 1
+		fi
 	fi
 }
 
@@ -131,11 +142,15 @@ function drv_rele_open {
 		$GPIO -g write $idx $RELE_GPIO_OPEN	
 	# Il driver definito non è stato trovato
 	elif [ "$fnc" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
+		return 1
 	else
 		echo "$(date) $fnc arg:$idx" >> "$LOG_OUTPUT_DRV_FILE"
 		$fnc "$idx" >> "$LOG_OUTPUT_DRV_FILE" 2>&1
+		if [ $? -eq 1 ]; then
+			return 1
+		fi
 	fi
 }
 
@@ -157,7 +172,7 @@ function drv_supply_bistable_init {
 		$GPIO -g mode $idx1 out
 	# Il driver definito non è stato trovato
 	elif [ "$fnc1" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx1"
+	        log_write "drv" "error" "Driver not found: $idx1"
         	message_write "warning" "Driver not found: $idx1"
 		return
 	else
@@ -171,7 +186,7 @@ function drv_supply_bistable_init {
 		$GPIO -g mode $idx2 out
 	# Il driver definito non è stato trovato
 	elif [ "$fnc2" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx2"
+	        log_write "drv" "error" "Driver not found: $idx2"
         	message_write "warning" "Driver not found: $idx2"
 	else
 		echo "$(date) $fnc2 arg:$idx2" >> "$LOG_OUTPUT_DRV_FILE"
@@ -197,7 +212,7 @@ function drv_supply_positive {
 		$GPIO -g write $idx1 $SUPPLY_GPIO_POS
 	# Il driver definito non è stato trovato
 	elif [ "$fnc1" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx1"
+	        log_write "drv" "error" "Driver not found: $idx1"
         	message_write "warning" "Driver not found: $idx1"
 		return
 	else
@@ -210,7 +225,7 @@ function drv_supply_positive {
 		$GPIO -g write $idx2 $SUPPLY_GPIO_POS
 	# Il driver definito non è stato trovato
 	elif [ "$fnc2" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx2"
+	        log_write "drv" "error" "Driver not found: $idx2"
         	message_write "warning" "Driver not found: $idx2"
 	else
 		echo "$(date) $fnc2 arg:$idx2" >> "$LOG_OUTPUT_DRV_FILE"
@@ -236,7 +251,7 @@ function drv_supply_negative {
 		$GPIO -g write $idx1 $SUPPLY_GPIO_NEG
 	# Il driver definito non è stato trovato
 	elif [ "$fnc1" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx1"
+	        log_write "drv" "error" "Driver not found: $idx1"
         	message_write "warning" "Driver not found: $idx1"
 		return
 	else
@@ -249,7 +264,7 @@ function drv_supply_negative {
 		$GPIO -g write $idx2 $SUPPLY_GPIO_NEG
 	# Il driver definito non è stato trovato
 	elif [ "$fnc2" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx2"
+	        log_write "drv" "error" "Driver not found: $idx2"
         	message_write "warning" "Driver not found: $idx2"
 	else
 		echo "$(date) $fnc2 arg:$idx2" >> "$LOG_OUTPUT_DRV_FILE"
@@ -273,7 +288,7 @@ function drv_rain_sensor_init {
 		$GPIO -g mode $idx in
 	# Il driver definito non è stato trovato
 	elif [ "$fnc" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
 	else
 		echo "$(date) $fnc arg:$idx" >> "$LOG_OUTPUT_DRV_FILE"
@@ -294,10 +309,37 @@ function drv_rain_sensor_get {
 
 	# Nessun driver definito, esegue la lettura del sensore tramite gpio del raspberry
 	if [ -z "$fnc" ]; then
-		val=`$GPIO -g read $idx`
+		vret=`$GPIO -g read $idx`
 	# Il driver definito non è stato trovato
 	elif [ "$fnc" == "drvnotfound" ]; then
-	        log_write "Driver not found: $idx"
+	        log_write "drv" "error" "Driver not found: $idx"
+        	message_write "warning" "Driver not found: $idx"
+	else
+		echo "$(date) $fnc arg:$idx" >> "$LOG_OUTPUT_DRV_FILE"
+		vret=`$fnc "$idx"`
+	fi
+
+	echo "$vret"
+
+}
+
+#
+# Legge lo stato le condizioni meteo dal servizio online
+#
+# $1	identificativo gpio sensore pioggia
+#
+function drv_rain_online_get {
+	local idx="$1"
+	local fnc=`get_driver_callback "rain_online_get" "$idx"`
+	local vret=""
+
+	# Nessun driver definito, esegue la lettura del sensore tramite gpio del raspberry
+	if [ -z "$fnc" ]; then
+	        log_write "drv" "error" "Driver not found: $idx"
+        	message_write "warning" "Driver not found: $idx"
+	# Il driver definito non è stato trovato
+	elif [ "$fnc" == "drvnotfound" ]; then
+	        log_write "drv" "error" "Driver not found: $idx"
         	message_write "warning" "Driver not found: $idx"
 	else
 		echo "$(date) $fnc arg:$idx" >> "$LOG_OUTPUT_DRV_FILE"

include/events.include.sh

@@ -5,19 +5,6 @@
 
 function trigger_event {
 
-	# check_rain_online_after
-	# check_rain_online_before
-	# check_rain_online_change
-	# check_rain_sensor_after
-	# check_rain_sensor_before
-	# check_rain_sensor_change
-	# ev_close_after
-	# ev_close_before
-	# ev_open_after
-	# ev_open_before
-	# init_after
-	# init_before
-
 	local EVENT="$1"
 	local CAUSE="$2"
 	local current_event_dir="$EVENT_DIR/$EVENT"
@@ -30,12 +17,32 @@ function trigger_event {
 				case "$EVENT" in
 					"ev_open_before" | "ev_open_after")
 						ALIAS="$2"
+						CURRENT_EVENT_ALIAS="$ALIAS"
 						FORCE="$3"
 						$f "$EVENT" "$ALIAS" "$FORCE" `date +%s`  &> /dev/null 
 						;;
 
+					"ev_open_in_before")
+						ALIAS="$2"
+						CURRENT_EVENT_ALIAS="$ALIAS"
+						FORCE="$3"
+						local MINUTE_START="$4"
+						local MINUTE_STOP="$5"
+						$f "$EVENT" "$ALIAS" "$FORCE" "$MINUTE_START" "$MINUTE_STOP" `date +%s`  &> /dev/null 
+						;;
+
+					"ev_open_in_after")
+						ALIAS="$2"
+						CURRENT_EVENT_ALIAS="$ALIAS"
+						FORCE="$3"
+						local CRON_START="$4"
+						local CRON_STOP="$5"
+						$f "$EVENT" "$ALIAS" "$FORCE" "$CRON_START" "$CRON_STOP" `date +%s`  &> /dev/null 
+						;;
+
 					"ev_close_before" | "ev_close_after")
 						ALIAS="$2"
+						CURRENT_EVENT_ALIAS="$ALIAS"
 						$f "$EVENT" "$ALIAS" `date +%s`  &> /dev/null 
 						;;
 
@@ -45,11 +52,40 @@ function trigger_event {
 						$f "$EVENT" "$STATE" `date +%s`  &> /dev/null 
 						;;
 
-					"check_rain_online_before" | "check_rain_online_after" | "check_rain_online_change")
+					"check_rain_online_before")
 						STATE="$2"
 						$f "$EVENT" "$STATE" `date +%s`  &> /dev/null 
 						;;
 
+					"check_rain_online_after" | "check_rain_online_change")
+						STATE="$2"
+						WEATHER="$3"
+						$f "$EVENT" "$STATE" "$WEATHER" `date +%s`  &> /dev/null 
+						;;
+
+
+					"init_before" | "init_after")
+						STATE="$2"
+						$f "$EVENT" `date +%s`  &> /dev/null 
+						;;
+
+					"cron_add_before" | "cron_add_after")
+						local CRON_TYPE="$2"
+						local CRON_ARG="$3"
+						local CRON_ELEMENT="$4"
+						$f "$EVENT" "$CRON_TYPE" "$CRON_ARG" "$CRON_ELEMENT" `date +%s`  &> /dev/null 
+						;;
+
+					"cron_del_before" | "cron_del_after")
+						local CRON_TYPE="$2"
+						local CRON_ARG="$3"
+						$f "$EVENT" "$CRON_TYPE" "$CRON_ARG" `date +%s`  &> /dev/null 
+						;;
+
+					"exec_poweroff_before" | "exec_poweroff_after" | "exec_reboot_before" | "exec_reboot_after" )
+						$f "$EVENT" `date +%s`  &> /dev/null 
+						;;
+
 					*)
 						$f "$EVENT" "$CAUSE" `date +%s`  &> /dev/null 
 						;;
@@ -57,7 +93,13 @@ function trigger_event {
 
 				local ec=$?
 				#echo "$EVENT ec=$ec" >> /tmp/piGarden.testevent
+
+				#CURRENT_EVENT="$EVENT"
+				#mqtt_status &
+
 				if [ $ec -ne 0 ]; then
+					CURRENT_EVENT="$EVENT"
+					mqtt_status &
 					log_write "Stop events chain for exit code $ec in $current_event_dir/$f"
 					return $ec
 				fi
@@ -66,6 +108,9 @@ function trigger_event {
 
 	fi
 
+	CURRENT_EVENT="$EVENT"
+	mqtt_status &
+
 }
 
 

include/rain.include.sh

@@ -1,47 +1,48 @@
 #
-# Controlla se se piove tramite http://api.wunderground.com/
+# Esegue controllo meteo tramite servizio online configurato in WEATHER_SERVICE
 #
 function check_rain_online {
 
-	trigger_event "check_rain_online_before" ""
+	if [ "$WEATHER_SERVICE" == "none" ]; then
-
+		log_write "rain" "warning" "check_rain_online - online service is disabled"
-	# http://www.wunderground.com/weather/api/d/docs?d=resources/phrase-glossary&MR=1
+		return
-	$CURL http://api.wunderground.com/api/$WUNDERGROUND_KEY/conditions/q/$WUNDERGROUND_LOCATION.json > $TMP_PATH/check_rain_online.json
-	local weather=`cat $TMP_PATH/check_rain_online.json | $JQ -M ".current_observation.weather"`
-	local current_observation=`cat $TMP_PATH/check_rain_online.json | $JQ -M ".current_observation"`
-	local local_epoch=`cat $TMP_PATH/check_rain_online.json | $JQ -M -r ".current_observation.local_epoch"`
-	local current_state_rain_online=""
-	local last_state_rain_online=`cat "$STATUS_DIR/last_state_rain_online" 2> /dev/null`
-	#echo $weather
-	#weather="[Light/Heavy] Drizzle"
-	if [ "$weather" = "null" ]; then
-		log_write "check_rain_online - failed read online data"
-	else
-		log_write "check_rain_online - weather=$weather, local_epoch=$local_epoch"
-		#if [[ "$weather" == *"Clear"* ]]; then
-		#if [[ "$weather" == *"Rain"* ]]; then
-		if 	[[ "$weather" == *"Rain"* ]] || 
-		 	[[ "$weather" == *"Snow"* ]] || 
-		 	[[ "$weather" == *"Hail"* ]] || 
-		 	[[ "$weather" == *"Ice"* ]] || 
-		 	[[ "$weather" == *"Thunderstorm"* ]] || 
-			[[ "$weather" == *"Drizzle"* ]]; 
-		then
-			current_state_rain_online='rain'
-			echo $local_epoch > "$STATUS_DIR/last_rain_online"
-		else
-			current_state_rain_online='norain'
-		fi
-		echo "$current_observation" > "$STATUS_DIR/last_weather_online"
-		if [ "$current_state_rain_online" != "$last_state_rain_online" ]; then
-			echo "$current_state_rain_online" > "$STATUS_DIR/last_state_rain_online"
-			trigger_event "check_rain_online_change" "$current_state_rain_online"
-		fi
 	fi
 
-	trigger_event "check_rain_online_after" "$current_state_rain_online"
+	trigger_event "check_rain_online_before" ""
+
+	local local_epoch=`drv_rain_online_get $WEATHER_SERVICE`
+	local current_state_rain_online=""
+	local last_state_rain_online=`cat "$STATUS_DIR/last_state_rain_online" 2> /dev/null`
+	local weather="null"
+
+	if [[ $local_epoch =~ ^-?[0-9]+$ ]]; then
+		if [ $local_epoch -eq 0 ]; then
+			log_write "rain" "error" "check_rain_online - failed read online data"
+		else
+			if [ $local_epoch -gt 0 ]; then
+				current_state_rain_online='rain'
+				echo $local_epoch > "$STATUS_DIR/last_rain_online"
+			else
+				current_state_rain_online='norain'
+			fi
+			weather=$(cat "$STATUS_DIR/last_weather_online" | $JQ -M ".weather")
+			
+			log_write "rain" "info" "check_rain_online - weather=$weather, local_epoch=$local_epoch"
+			if [ "$current_state_rain_online" != "$last_state_rain_online" ]; then
+				echo "$current_state_rain_online" > "$STATUS_DIR/last_state_rain_online"
+				trigger_event "check_rain_online_change" "$current_state_rain_online" "$weather"
+			fi
+		fi
+	else
+		log_write "rain" "error" "check_rain_online - failed read online data"
+	fi
+
+	trigger_event "check_rain_online_after" "$current_state_rain_online" "$weather"
 }
 
+
+
+
 #
 # Controlla se se piove tramite sensore
 #
@@ -56,11 +57,11 @@ function check_rain_sensor {
 			current_state_rain_sensor='rain'
 			local local_epoch=`date +%s`
 			echo $local_epoch > "$STATUS_DIR/last_rain_sensor"
-			log_write "check_rain_sensor - now it's raining ($local_epoch)"
+			log_write "rain" "info" "check_rain_sensor - now it's raining ($local_epoch)"
 			#return $local_epoch	
 		else
 			current_state_rain_sensor='norain'
-			log_write "check_rain_sensor - now is not raining"
+			log_write "rain" "info" "check_rain_sensor - now is not raining"
 		fi
 		if [ "$current_state_rain_sensor" != "$last_state_rain_sensor" ]; then
 			echo "$current_state_rain_sensor" > "$STATUS_DIR/last_state_rain_sensor"
@@ -68,7 +69,7 @@ function check_rain_sensor {
 		fi
 		trigger_event "check_rain_sensor_after" "$current_state_rain_sensor"
 	else
-		log_write "Rain sensor not present"
+		log_write "rain" "warning" "Rain sensor not present"
 	fi
 
 }
@@ -112,7 +113,7 @@ function close_all_for_rain {
 			#echo "$al = $state"
 			if [ "$state" = "1" ] && [ "$evnorain" != "1" ]; then
 				ev_close $al
-				log_write "close_all_for_rain - Close solenoid '$al' for rain"
+				log_write "irrigate" "warning" "close_all_for_rain - Close solenoid '$al' for rain"
 			fi
 		done
 	fi

include/socket.include.sh

@@ -19,7 +19,7 @@ function stop_socket_server {
                 exit 1
         fi
 
-	log_write "stop socket server"
+	log_write "socket_server" "info" "stop socket server"
 
         kill -9 $(list_descendants `cat "$TCPSERVER_PID_FILE"`) 2> /dev/null
         kill -9 `cat "$TCPSERVER_PID_FILE"` 2> /dev/null
@@ -44,7 +44,7 @@ function socket_server_command {
 		user=$(echo "$user" | $TR -d '[\r\n]')
 		password=$(echo "$password" | $TR -d '[\r\n]')
 		if [ "$user" != "$TCPSERVER_USER" ] || [ "$password" != "$TCPSERVER_PWD" ]; then
-			log_write "socket connection from: $TCPREMOTEIP - Bad socket server credentials - user:$user"
+			log_write "socket_server" "warning" "socket connection from: $TCPREMOTEIP - Bad socket server credentials - user:$user"
 			json_error 0 "Bad socket server credentials"
 			return
 		fi
@@ -61,9 +61,9 @@ function socket_server_command {
 	arg7=$(echo "$line " | $CUT -d ' ' -f7)
 	arg8=$(echo "$line " | $CUT -d ' ' -f8)
 
-	log_write "socket connection from: $TCPREMOTEIP - command: $arg1 $arg2 $arg3 $arg4 $arg5 $arg6 $arg7 $arg8"
+	log_write "socket_server" "info" "socket connection from: $TCPREMOTEIP - command: $arg1 $arg2 $arg3 $arg4 $arg5 $arg6 $arg7 $arg8"
 	
-	reset_messages &> /dev/null
+	#reset_messages &> /dev/null
 
 	case "$arg1" in
         	status)
@@ -102,6 +102,12 @@ function socket_server_command {
 			json_status
 			;;
 
+		cron_enable_all_open_close)
+			cron_enable_all_open_close &> /dev/null
+			message_write "success" "All solenoid enabled"
+			json_status
+			;;
+
 		set_general_cron)
 			local vret=""
 			for i in $arg2 $arg3 $arg4 $arg5 $arg6 $arg7
@@ -121,7 +127,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron set failed"
-				log_write "Cron set failed: $vret"
+				log_write "socket_server" "error" "Cron set failed: $vret"
 			else
 				message_write "success" "Cron set successfull"
 				json_status
@@ -136,7 +142,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron set failed"
-				log_write "Cron del failed: $vret"
+				log_write "socket_server" "error" "Cron del failed: $vret"
 			else
 				message_write "success" "Cron set successfull"
 				json_status
@@ -151,7 +157,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron del failed"
-				log_write "Cron del failed: $vret"
+				log_write "socket_server" "error" "Cron del failed: $vret"
 			else
 				message_write "success" "Scheduled start successfully deleted"
 				json_status "get_cron_open_in:$arg2"
@@ -167,7 +173,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron set failed"
-				log_write "Cron set failed: $vret"
+				log_write "socket_server" "error" "Cron set failed: $vret"
 			else
 				message_write "success" "Cron set successfull"
 				json_status
@@ -182,7 +188,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron set failed"
-				log_write "Cron set failed: $vret"
+				log_write "socket_server" "error" "Cron set failed: $vret"
 			else
 				message_write "success" "Cron set successfull"
 				json_status
@@ -197,7 +203,7 @@ function socket_server_command {
 
 			if [[ ! -z $vret ]]; then
 				json_error 0 "Cron set failed"
-				log_write "Cron set failed: $vret"
+				log_write "socket_server" "error" "Cron set failed: $vret"
 			else
 				message_write "success" "Cron set successfull"
 				json_status
@@ -205,6 +211,21 @@ function socket_server_command {
 
 			;;
 
+		cmd_pigardensched)
+			local vret=""
+
+			vret=`cmd_pigardensched $arg2 $arg3 $arg4 $arg5 $arg6`
+
+			if [[ ! -z $vret ]]; then
+				json_error 0 "piGardenSched command failed"
+				log_write "socket_server" "error" "piGardenSched command failed: $vret"
+			else
+				message_write "success" "Schedule set successfull"
+				json_status
+			fi
+
+			;;
+
 		reboot)
 			message_write "warning" "System reboot is started"
 			json_status
@@ -225,7 +246,7 @@ function socket_server_command {
 
 	esac
 	
-	reset_messages &> /dev/null
+	#reset_messages &> /dev/null
 
 }
 

piGarden.sh

@@ -10,7 +10,7 @@
 #
 function initialize {
 
-	log_write "Run initialize"
+	log_write "general" "info" "Run initialize"
 
 	unlock
 
@@ -26,10 +26,6 @@ function initialize {
 	# Imposta l'alimentazione con voltaggio negativo e setta i gpio in scrittura per le elettrovalvole bistabili
 	if [ "$EV_MONOSTABLE" != "1" ]; then
 		drv_supply_bistable_init "$SUPPLY_GPIO_1" "$SUPPLY_GPIO_2"
-		#$GPIO -g write $SUPPLY_GPIO_1 0
-		#$GPIO -g write $SUPPLY_GPIO_2 0
-		#$GPIO -g mode $SUPPLY_GPIO_1 out
-		#$GPIO -g mode $SUPPLY_GPIO_2 out
 	fi
 
 	# Elimina tutti gli stati delle elettrovalvole preesistenti
@@ -40,8 +36,6 @@ function initialize {
 	do
 		g=EV"$i"_GPIO
 		drv_rele_init "${!g}"
-		#$GPIO -g write ${!g} RELE_GPIO_OPEN 	# chiude l'alimentazione all'elettrovalvole
-		#$GPIO -g mode ${!g} out		# setta il gpio nella modalita di scrittura
 		ev_set_state $i 0
 	done
 
@@ -56,21 +50,20 @@ function initialize {
 	# Inizializza il sensore di rilevamento pioggia
 	if [ -n "$RAIN_GPIO" ]; then 
 		drv_rain_sensor_init "$RAIN_GPIO"
-		#$GPIO -g mode $RAIN_GPIO in
+		log_write "rain" "info" "Rain sensor initialized"
-		log_write "Rain sensor initialized"
 	else
-		log_write "Rain sensor not present"
+		log_write "rain" "info" "Rain sensor not present"
 	fi
 
 	trigger_event "init_after" ""
-	log_write "End initialize"
+	log_write "general" "info" "End initialize"
 
 }
 
 #
 # Elimina i file contenente i messaggi da inserire nel json status
 #
-function reset_messages {
+function reset_messages_old {
 	rm -f "$LAST_INFO_FILE.$!"
 	rm -f "$LAST_WARNING_FILE.$!"
 	rm -f "$LAST_SUCCESS_FILE.$!"
@@ -90,6 +83,10 @@ function ev_open {
 	local EVNUM=$?
 	local g=`ev_number2gpio $EVNUM`
 	local EVNORAIN=`ev_number2norain $EVNUM`
+	local EV_IS_REMOTE_VAR=EV"$EVNUM"_REMOTE
+	local EV_IS_REMOTE=${!EV_IS_REMOTE_VAR}
+	local EV_IS_MONOSTABLE_VAR=EV"$EVNUM"_MONOSTABLE
+	local EV_IS_MONOSTABLE=${!EV_IS_MONOSTABLE_VAR}
 
 	if [ ! "$2" = "force" ] && [ "$EVNORAIN" != "1" ]; then
 		if [[ "$NOT_IRRIGATE_IF_RAIN_ONLINE" -gt 0 && -f $STATUS_DIR/last_rain_online ]]; then
@@ -98,8 +95,10 @@ function ev_open {
 			local dif=0
 			let "dif = now - last_rain"
 			if [ $dif -lt $NOT_IRRIGATE_IF_RAIN_ONLINE ]; then
-				log_write "Solenoid '$1' not open for rain (online check)"
 				message_write "warning" "Solenoid not open for rain"
+				trigger_event "ev_not_open_for_rain_online" "$1" 
+				trigger_event "ev_not_open_for_rain" "$1" 
+				log_write "irrigate" "warning" "Solenoid '$1' not open for rain (online check)"
 				return
 			fi
 		fi
@@ -111,8 +110,10 @@ function ev_open {
 			local dif=0
 			let "dif = now - last_rain"
 			if [ $dif -lt $NOT_IRRIGATE_IF_RAIN_SENSOR ]; then
-				log_write "Solenoid '$1' not open for rain (sensor check)"
 				message_write "warning" "Solenoid not open for rain"
+				trigger_event "ev_not_open_for_rain_sensor" "$1" 
+				trigger_event "ev_not_open_for_rain" "$1" 
+				log_write "irrigate" "warning" "Solenoid '$1' not open for rain (sensor check)"
 				return
 			fi
 		fi
@@ -125,34 +126,36 @@ function ev_open {
 
 	trigger_event "ev_open_before" "$1" "$2"
 	if [ $? -ne 0 ]; then
-		log_write "Solenoid '$1' not open due to external event"
+		log_write "irrigate" "warning" "Solenoid '$1' not open due to external event"
 		message_write 'warning' "Solenoid not open due to external event"
+		mqtt_status
 		return
 	fi
 
 	lock
 
 	# Gestisce l'apertura dell'elettrovalvola in base alla tipologia (monostabile / bistabile) 
-	if [ "$EV_MONOSTABLE" == "1" ]; then
+	if [ "$EV_MONOSTABLE" == "1" ] || [ "$EV_IS_REMOTE" == "1" ] || [ "$EV_IS_MONOSTABLE" == "1" ]; then
-		#$GPIO -g write $g $RELE_GPIO_CLOSE
 		drv_rele_close "$g"
+		if [ $? -eq 1 ]; then
+			unlock
+			return		
+		fi
 	else
 		supply_positive
-		#$GPIO -g write $g $RELE_GPIO_CLOSE
 		drv_rele_close "$g"
 		sleep 1
-		#$GPIO -g write $g $RELE_GPIO_OPEN
 		drv_rele_open "$g"
 	fi
 
 	ev_set_state $EVNUM $state
 
+	log_write "irrigate" "info" "Solenoid '$1' open"
+	message_write "success" "Solenoid open"
+
 	trigger_event "ev_open_after" "$1" "$2"
 
 	unlock
-
-	log_write "Solenoid '$1' open"
-	message_write "success" "Solenoid open"
 }
 
 #
@@ -173,23 +176,30 @@ function ev_open_in {
 	if ! [[ $minute_start =~ $re ]] ; then
 		echo -e "Time start of irrigation is wrong or not specified"
 		message_write "warning" "Time start of irrigation is wrong or not specified"
+		mqtt_status
 		return 1
 	fi
 	if ! [[ $minute_stop =~ $re ]] ; then
 		echo -e "Time stop of irrigation is wrong or not specified"
 		message_write "warning" "Time stop of irrigation is wrong or not specified"
+		mqtt_status
 		return 1
 	fi
 	if [ $minute_stop -lt "1" ] ; then
 		echo -e "Time stop of irrigation is wrong"
 		message_write "warning" "Time stop of irrigation is wrong"
+		mqtt_status
 		return 1
 	fi
 	if [ "empty$alias" == "empty" ]; then
 		echo -e "Alias solenoid not specified"
 		message_write "warning" "Alias solenoid not specified"
+		mqtt_status
 		return 1
 	fi
+
+	trigger_event "ev_open_in_before" "$3" "$4" "$1" "$2"
+
 	gpio_alias2number $alias > /dev/null 2>&1
 
 	minute_start=$(($minute_start + 1))
@@ -201,6 +211,7 @@ function ev_open_in {
 
 	if [ "$minute_start" -eq "1" ]; then
 		ev_open $alias $force
+		cron_start="- - - - -"
 	else
 		cron_add open_in $cron_start "$alias" "$force"
 	fi
@@ -210,8 +221,7 @@ function ev_open_in {
 
 	message_write "success" "Scheduled start successfully performed"
 
-	#echo $cron_start
+	trigger_event "ev_open_in_after" "$3" "$4" "$cron_start" "$cron_stop"
-	#echo $cron_stop
 
 }
 
@@ -226,33 +236,36 @@ function ev_close {
 	ev_alias2number $1
 	EVNUM=$?
 	g=`ev_number2gpio $EVNUM`
+	local EV_IS_REMOTE_VAR=EV"$EVNUM"_REMOTE
+	local EV_IS_REMOTE=${!EV_IS_REMOTE_VAR}
 
 	trigger_event "ev_close_before" "$1"
 
 	lock
 
 	# Gestisce l'apertura dell'elettrovalvola in base alla tipologia (monostabile / bistabile) 
-	if [ "$EV_MONOSTABLE" == "1" ]; then
+	if [ "$EV_MONOSTABLE" == "1" ] || [ "$EV_IS_REMOTE" == "1" ]; then
-		#$GPIO -g write $g $RELE_GPIO_OPEN
 		drv_rele_open "$g"
+		if [ $? -eq 1 ]; then
+			unlock
+			return		
+		fi
 	else
 		supply_negative
-		#$GPIO -g write $g $RELE_GPIO_CLOSE
 		drv_rele_close "$g"
 		sleep 1
-		#$GPIO -g write $g $RELE_GPIO_OPEN
 		drv_rele_open "$g"
 	fi
 
 	ev_set_state $EVNUM 0
 
+	log_write "irrigate" "info" "Solenoid '$1' close"
+	message_write "success" "Solenoid close"
+
 	trigger_event "ev_close_after" "$1"
 
 	unlock
 
-	log_write "Solenoid '$1' close"
-	message_write "success" "Solenoid close"
-
 	cron_del open_in_stop $1 > /dev/null 2>&1
 }
 
@@ -261,8 +274,6 @@ function ev_close {
 #
 function supply_positive {
 	drv_supply_positive "$SUPPLY_GPIO_1" "$SUPPLY_GPIO_2"
-	#$GPIO -g write $SUPPLY_GPIO_1 $SUPPLY_GPIO_POS
-	#$GPIO -g write $SUPPLY_GPIO_2 $SUPPLY_GPIO_POS
 }
 
 #
@@ -270,13 +281,13 @@ function supply_positive {
 #
 function supply_negative {
 	drv_supply_negative "$SUPPLY_GPIO_1" "$SUPPLY_GPIO_2"
-	#$GPIO -g write $SUPPLY_GPIO_1 $SUPPLY_GPIO_NEG
-	#$GPIO -g write $SUPPLY_GPIO_2 $SUPPLY_GPIO_NEG
 }
 
 #
 # Scrive un messaggio nel file di log
-# $1 log da scrivere
+# $1 type
+# $2 level
+# $3 log da scrivere
 #
 function log_write {
 	if [ -e "$LOG_FILE" ]; then
@@ -287,7 +298,33 @@ function log_write {
 		fi
 	fi
 
-	echo -e "`date`\t\t$1" >> $LOG_FILE
+	if [ -e "$LOG_OUTPUT_DRV_FILE" ]; then
+		local actualsize=$($WC -c <"$LOG_OUTPUT_DRV_FILE")
+		if [ $actualsize -ge $LOG_FILE_MAX_SIZE ]; then
+			$GZIP $LOG_OUTPUT_DRV_FILE
+			$MV $LOG_OUTPUT_DRV_FILE.gz $LOG_OUTPUT_DRV_FILE.`date +%Y%m%d%H%M`.gz	
+		fi
+	fi
+
+	echo -e "`date`\t\t$1\t$2\t$3" >> $LOG_FILE
+
+	log_send "$1" "$2" "`date '+%Y-%m-%d %H:%M:%S'`" "$3"
+
+}
+
+#
+# Invia un log verso piGardenWeb
+# $1 type
+# $2 level
+# $3 date time
+# $4 messaggio
+#
+function log_send {
+
+	if [[ ! -z "$LOG_URL" ]]; then
+		$CURL $LOG_CURL_PARAM "$LOG_URL" -d "api_token=$LOG_API_TOKEN&type=$1&level=$2&datetime_log=$3&message=$4" &> /dev/null &
+	fi
+
 }
 
 #
@@ -296,6 +333,20 @@ function log_write {
 # $2 messaggio
 #
 function message_write {
+	local file_message=""
+	if [ "$1" = 'info' ]; then
+		MESSAGE_INFO="$2"
+	elif [ "$1" = "warning" ]; then
+		MESSAGE_WARNING="$2"
+	elif [ "$1" = "success" ]; then
+		MESSAGE_SUCCESS="$2"
+	else
+		return
+	fi
+	
+}
+
+function message_write_old {
 	local file_message=""
 	if [ "$1" = 'info' ]; then
 		file_message="$LAST_INFO_FILE.$!"
@@ -342,8 +393,9 @@ function gpio_alias2number {
 		fi
 	done
 
-	log_write "ERROR solenoid alias not found: $1"
+	log_write "general" "error" "ERROR solenoid alias not found: $1"
 	message_write "warning" "Solenoid alias not found"
+	mqtt_status
 	exit 1
 }
 
@@ -361,8 +413,9 @@ function ev_alias2number {
 		fi
 	done
 
-	log_write "ERROR solenoid alias not found: $1"
+	log_write "general" "error" "ERROR solenoid alias not found: $1"
 	message_write "warning" "Solenoid alias not found"
+	mqtt_status
 	exit 1
 }
 
@@ -447,7 +500,7 @@ function close_all {
 			#echo "$al = $state"
 			if [[ "$state" -gt "0" || "$1" = "force" ]]; then
 				ev_close $al
-				log_write "close_all - Close solenoid '$al' for rain"
+				log_write "irrigate" "info" "close_all - Close solenoid '$al' for rain"
 			fi
 		done
 
@@ -470,8 +523,9 @@ function list_alias {
 #
 # Stampa un json contanente lo status della centralina
 # $1 .. $6 parametri opzionali
-# 	- get_cron: aggiunge i dati relativi ai crontab delle scehdulazioni di apertura/chisura delle elettrovalvole
+# 	- get_cron: aggiunge i dati relativi ai crontab delle scehdulazioni di apertura/chisura
 #	- get_cron_open_in: aggiunge i dati relativi ai crontab degli avvii ritardati eseguiti con il comando open_in
+#       - get_schedule: aggiunge i dati relativi alle schedulazioni di piGardenSched
 #
 function json_status {
 	local json=""
@@ -485,6 +539,13 @@ function json_status {
 	local last_success=""
 	local with_get_cron="0"
 	local with_get_cron_open_in="0"
+	local with_get_schedule="0"
+	local current_pid=$!
+	local json_event="\"event\": {\"event\": \"$CURRENT_EVENT\", \"alias\": \"$CURRENT_EVENT_ALIAS\"}"
+
+	if [ "$PARENT_PID" -gt "0" ]; then
+		current_pid=$PARENT_PID
+	fi
 
 	local vret=""
 	for i in $1 $2 $3 $4 $5 $6
@@ -497,9 +558,12 @@ function json_status {
 			with_get_cron_open_in="1"
 		elif [[ "$i" == get_cron_open_in:* ]]; then
 			with_get_cron_open_in="${i#get_cron_open_in:}"
+		elif [ $i = "get_schedule" ] && [[ $PIGARDENSCHED == "1" ]]; then
+			with_get_schedule="1"
 		fi
 	done
 
+	local json_ev=""
 	for i in $(seq $EV_TOTAL)
 	do
 		local a=EV"$i"_ALIAS
@@ -509,9 +573,14 @@ function json_status {
 		if [ -n "$json" ]; then
 			json="$json,"
 		fi
-		json="$json\"$i\":{\"name\":\"$av\",\"state\":$sv}"
+		json="$json\"$av\":{\"name\":\"$av\",\"state\":$sv}"
+
+		if [ -n "$json_ev" ]; then
+			json_ev="$json_ev,"
+		fi
+		json_ev="$json_ev\"$a\":{\"alias\":\"$av\"}"
 	done
-	json="\"zones\":{$json}"
+	json="\"zones\":{$json},\"ev\":{$json_ev}"
 
 	local last_rain_sensor=`cat "$STATUS_DIR/last_rain_sensor" 2> /dev/null`
 	local last_rain_online=`cat "$STATUS_DIR/last_rain_online" 2> /dev/null`
@@ -520,15 +589,10 @@ function json_status {
 	if [[ ! -z "$last_weather_online" ]]; then
 		json_last_weather_online=$last_weather_online
 	fi
-	if [ -f "$LAST_INFO_FILE.$!" ]; then
+
-		last_info=`cat "$LAST_INFO_FILE.$!"`
+	last_info="$MESSAGE_INFO"
-	fi
+	last_warning="$MESSAGE_WARNING"
-	if [ -f "$LAST_WARNING_FILE.$!" ]; then
+	last_success="$MESSAGE_SUCCESS"
-		last_warning=`cat "$LAST_WARNING_FILE.$!"`
-	fi
-	if [ -f "$LAST_SUCCESS_FILE.$!" ]; then
-		last_success=`cat "$LAST_SUCCESS_FILE.$!"`
-	fi
 	local json_last_weather_online="\"last_weather_online\":$json_last_weather_online"
 	local json_last_rain_sensor="\"last_rain_sensor\":\"$last_rain_sensor\""
 	local json_last_rain_online="\"last_rain_online\":\"$last_rain_online\""
@@ -569,6 +633,24 @@ function json_status {
 	fi
 	local json_cron="\"cron\":{$json_get_cron}"			
 
+	local json_get_schedule=""			
+	local json_schedule=""
+	if [ $with_get_schedule != "0" ]; then
+		json_get_schedule=""
+		for scheduled in `$PIGARDENSCHED_PATH sched`
+		do
+			local ev=$(echo $scheduled|$CUT -f1 -d";")
+			local evcomplete="$ev"_ALIAS
+			local al=${!evcomplete}
+			local json_get_schedule="\"$ev\": {\"alias\": \"$al\", \"entry\": \"$scheduled\"}, $json_get_schedule"
+		done
+		if [[ !  -z  $json_get_schedule ]]; then
+			json_get_schedule="${json_get_schedule::-2}"
+		fi
+	
+		local json_schedule=", \"schedule\":{$json_get_schedule}"
+	fi
+
 	local json_get_cron_open_in=""			
 	if [ $with_get_cron_open_in != "0" ]; then
 		local values_open_in="" 
@@ -601,8 +683,9 @@ function json_status {
 		json_get_cron_open_in="\"open_in\": {$values_open_in},\"open_in_stop\": {$values_open_in_stop}"
 	fi
 	local json_cron_open_in="\"cron_open_in\":{$json_get_cron_open_in}"
+	local json_timestamp="\"timestamp\": $(date +%s)"
 
-	json="{$json_version,$json,$json_last_weather_online,$json_error,$json_last_info,$json_last_warning,$json_last_success,$json_last_rain_online,$json_last_rain_sensor,$json_cron,$json_cron_open_in}"
+	json="{$json_version,$json_timestamp,$json_event,$json,$json_last_weather_online,$json_error,$json_last_info,$json_last_warning,$json_last_success,$json_last_rain_online,$json_last_rain_sensor,$json_cron,$json_cron_open_in $json_schedule}"
 
 	echo "$json"
 
@@ -610,6 +693,26 @@ function json_status {
 
 }
 
+#
+# Invia al broker mqtt il json contentente lo stato del sistema
+#
+# $1 parent pid (opzionale)
+#
+function mqtt_status {
+
+	if [ ! $MQTT_ENABLE -eq 1 ]; then
+		return
+	fi
+
+	if [ ! -z "$1" ]; then
+		PARENT_PID=$1
+	fi
+
+	local js=$(json_status)
+	$MOSQUITTO_PUB -h $MQTT_HOST -p $MQTT_PORT -u $MQTT_USER -P $MQTT_PWD -i $MQTT_CLIENT_ID -r -t "$MQTT_TOPIC" -m "$js"
+}
+
+
 #
 # Mostra il i parametri dello script
 #
@@ -624,7 +727,8 @@ function show_usage {
 	echo -e "\t$NAME_SCRIPT list_alias                                   view list of aliases solenoid"
 	echo -e "\t$NAME_SCRIPT ev_status alias                              show status solenoid"
 	echo -e "\t$NAME_SCRIPT ev_status_all                                show status solenoids"
-	echo -e "\t$NAME_SCRIPT json_status [get_cron|get_cron_open_in]      show status in json format"
+	echo -e "\t$NAME_SCRIPT json_status [get_cron|get_cron_open_in|get_schedule] show status in json format"
+	echo -e "\t$NAME_SCRIPT mqtt_status                                  send status in json format to mqtt broker"
 	echo -e "\t$NAME_SCRIPT check_rain_online                            check rain from http://api.wunderground.com/"
 	echo -e "\t$NAME_SCRIPT check_rain_sensor                            check rain from hardware sensor"
 	echo -e "\t$NAME_SCRIPT close_all_for_rain                           close all solenoid if it's raining"
@@ -655,6 +759,8 @@ function show_usage {
 	echo -e "\t$NAME_SCRIPT del_cron_close alias                         remove all crontab for close a solenoid"
 	echo -e "\t$NAME_SCRIPT get_cron_close alias                         get all crontab for close a solenoid"
 	echo -e "\n"
+	echo -e "\t$NAME_SCRIPT cmd_pigardensched [prm1 [prm2 [prm3]...]]    performs a pigardensched command"
+	echo -e "\n"
 	echo -e "\t$NAME_SCRIPT debug1 [parameter]|[parameter]|..]           Run debug code 1"
 	echo -e "\t$NAME_SCRIPT debug2 [parameter]|[parameter]|..]           Run debug code 2"
 }
@@ -693,12 +799,12 @@ function lock {
 		local foo=bar
 	else
 		if [ "$current_time" -gt "$max_time" ]; then
-			log_write "Maximum locked time reached"
+			log_write "general" "error" "Maximum locked time reached"
 			sleep $max_time
 			unlock
 			exit 1
 		fi
-		log_write "Sleep 1 second for locked state"
+		log_write "general" "info" "Sleep 1 second for locked state"
 		sleep 1
 		lock $current_time
 		return
@@ -747,7 +853,7 @@ function send_identifier {
 	fi
 	echo "$ID" > "$FILE_ID"
 
-	log_write "Send installation identifier to collect usage"
+	log_write "general" "info" "Send installation identifier to collect usage"
 
 	$CURL https://www.lejubila.net/statistic/collect_usage/piGarden/$ID/$VERSION/$SUB_VERSION/$RELEASE_VERSION > /dev/null 2>&1
 
@@ -757,19 +863,135 @@ function send_identifier {
 # Spenge il sistema 
 #
 function exec_poweroff {
+	trigger_event "exec_poweroff_before" 
 	local PATH_SCRIPT=`$READLINK -f "$DIR_SCRIPT/scripts/poweroff.sh"`
-echo "$PATH_SCRIPT" > tmp/prova.txt
         sleep 15
 	. $PATH_SCRIPT
+	trigger_event "exec_poweroff_after" 
 }
 
 #
 # Spenge il sistema 
 #
 function exec_reboot {
+	trigger_event "exec_reboot_before" 
 	local PATH_SCRIPT=`$READLINK -f "$DIR_SCRIPT/scripts/reboot.sh"`
         sleep 15
 	. $PATH_SCRIPT
+	trigger_event "exec_reboot_after" 
+}
+
+#
+# Esegue un comando con piGardenSched
+#
+# $1	parametro 1 
+# $2	parametro 2 
+# $3	parametro 3 
+# $4	parametro 4 
+# $5	parametro 5 
+
+function cmd_pigardensched {
+	local foo="bar"
+
+	if [ $PIGARDENSCHED == 0 ]; then
+		echo "piGardenSched not configured in piGarden" >&2
+		log_write "piGardenSched" "error" "piGardenSched not configured in piGarden"
+		return
+	fi
+
+	$PIGARDENSCHED_PATH $1 $2 $3 $4 $5
+
+	if [ $? -ne 0 ]; then
+		echo "piGardenSched command failed"
+	fi
+}
+
+
+#
+# Converte da gradi a direzione
+#
+# $1 gradi
+#
+function deg2dir {
+	local deg=$(echo $1 | $SED 's/\..*$//')
+	local dir=""
+
+	if [ "$deg" == "null" ]; then
+		echo ""
+		return
+	fi
+
+	# N	348.75 - 11.25
+	if [ $deg -le 11 ]; then
+		dir="North"
+
+	# NNE	11.25 - 33.75
+	elif [ $deg -le 33 ]; then
+		dir="NNE"
+
+	# NE	33.75 - 56.25
+	elif [ $deg -le 56 ]; then
+		dir="NE"
+
+	# ENE	56.25 - 78.75
+	elif [ $deg -le 78 ]; then
+		dir="ENE"
+
+	# E	78.75 - 101.25
+	elif [ $deg -le 101 ]; then
+		dir="East"
+
+	# ESE	101.25 - 123.75
+	elif [ $deg -le 123 ]; then
+		dir="ESE"
+
+	# SE	123.75 - 146.25
+	elif [ $deg -le 146 ]; then
+		dir="SE"
+
+	# SSE	146.25 - 168.75
+	elif [ $deg -le 168 ]; then
+		dir="SSE"
+
+	# S	168.75 - 191.25
+	elif [ $deg -le 191 ]; then
+		dir="South"
+
+	# SSW	191.25 - 213.75
+	elif [ $deg -le 213 ]; then
+		dir="SSW"
+
+	# SW	213.75 - 236.25
+	elif [ $deg -le 236 ]; then
+		dir="SW"
+
+	# WSW	236.25 - 258.75
+	elif [ $deg -le 258 ]; then
+		dir="WSW"
+
+	# W	258.75 - 281.25
+	elif [ $deg -le 281 ]; then
+		dir="West"
+
+	# WNW	281.25 - 303.75
+	elif [ $deg -le 303 ]; then
+		dir="WNW"
+
+	# NW	303.75 - 326.25
+	elif [ $deg -le 326 ]; then
+		dir="NW"
+
+	# NNW	326.25 - 348.75
+	elif [ $deg -le 348 ]; then
+		dir="NNW"
+
+	# N	348.75 - 11.25
+	else
+		dir="North"
+	fi
+
+	echo $dir
+
 }
 
 function debug1 {
@@ -781,7 +1003,7 @@ function debug2 {
 }
 
 VERSION=0
-SUB_VERSION=5
+SUB_VERSION=6
 RELEASE_VERSION=1
 
 DIR_SCRIPT=`dirname $0`
@@ -810,18 +1032,33 @@ fi
 . "$DIR_SCRIPT/include/rain.include.sh"
 . "$DIR_SCRIPT/include/events.include.sh"
 
-LAST_INFO_FILE="$STATUS_DIR/last_info"
+MESSAGE_INFO=""
-LAST_WARNING_FILE="$STATUS_DIR/last_warning"
+MESSAGE_WARNING=""
-LAST_SUCCESS_FILE="$STATUS_DIR/last_success"
+MESSAGE_SUCCESS=""
+
+CURRENT_EVENT=""
+CURRENT_EVENT_ALIAS=""
+
+PARENT_PID=0
 
 if [ -z $LOG_OUTPUT_DRV_FILE ]; then
-	$LOG_OUTPUT_DRV_FILE="/dev/null"
+	LOG_OUTPUT_DRV_FILE="/dev/null"
 fi
 
 if [ -z "$EVENT_DIR" ]; then
 	EVENT_DIR="$DIR_SCRIPT/events"
 fi
 
+if [ -z $WEATHER_SERVICE ]; then
+	WEATHER_SERVICE="drv:wunderground"
+elif [ "$WEATHER_SERVICE" != "none" ]; then 
+	WEATHER_SERVICE="drv:$WEATHER_SERVICE"
+fi
+
+PIGARDENSCHED="0"
+if [[ -x "$PIGARDENSCHED_PATH" ]]; then
+	PIGARDENSCHED="1"
+fi
 
 # Elimina il file di lock se più vecchio di 11 secondi
 if [ -f "$LOCK_FILE" ]; then
@@ -836,6 +1073,8 @@ fi
 send_identifier &
 setup_drv
 
+#echo "EV_MONOSTABLE=$EV_MONOSTABLE"
+
 case "$1" in
 	init) 
 		initialize
@@ -876,6 +1115,10 @@ case "$1" in
 		json_status $2 $3 $4 $5 $6
 		;;
 
+	mqtt_status)
+		mqtt_status $2
+		;;
+
 	check_rain_online)
 		check_rain_online
 		;;
@@ -907,7 +1150,7 @@ case "$1" in
                 nohup $0 start_socket_server_daemon > /dev/null 2>&1 &
 
                 echo "Daemon is started widh pid $!"
-		log_write "start socket server with pid $!"
+		log_write "socket_server" "info" "start socket server with pid $!"
                 ;;
 
 	start_socket_server_daemon)
@@ -990,6 +1233,10 @@ case "$1" in
 		get_cron_close $2
 		;;
 
+	cmd_pigardensched)
+		cmd_pigardensched $2 $3 $4 $5
+		;;
+	
 	reboot)
 		exec_reboot
 		;;
@@ -1017,4 +1264,4 @@ esac
 rm "$TMP_CRON_FILE" 2> /dev/null
 rm "$TMP_CRON_FILE-2" 2> /dev/null
 
-reset_messages &> /dev/null
+#reset_messages &> /dev/null