version 0.2.1

drv/rainsensorqty/README.md

@@ -10,16 +10,16 @@ FILE DI CONFIGURAZIONE /etc/piGarden.conf:
 -----------------------------------------
 NOTA: vedere nella directory conf_example il file esempio piu' aggiornato!
 
-per attivare il driver è necessario inserire la seguente variabile nel file di configurazion
+per attivare il driver e' necessario inserire la seguente variabile nel file di configurazion
 	RAIN_GPIO="drv:rainsensorqty:25"        # Physical 22 - wPi 6
 
-la variabile seguente è impiegata anche da drvrainsensorqty per rilevare la chiusura del contatto magnetico che, in un circuito pull-up, è lo stato 1.
+la variabile seguente e' impiegata anche da drv_rainsensorqty per rilevare la chiusura del contatto magnetico che, in un circuito pull-up, e' lo stato 1.
 	# Valore in ingresso sul gpio definito in RAIN_GPIO che indica lo stato di pioggia
 	RAIN_GPIO_STATE=1
 le seguenti variabili controllano il driver come descritto:
-	RAINSENSORQTY_LOOPSFORSETRAINING=16 # dopo 10 impulsi, 10 vaschette riempite si considera pioggia
+	RAINSENSORQTY_LOOPSFORSETRAINING=16 # dopo 16 impulsi, 16 vaschette riempite si considera pioggia
-	RAINSENSORQTY_SECSBETWEENRAINEVENT=10800 # =3h, significa che dopo 3 si resetta il numero di vaschette da riempire e solo dopo il riempimento del numero di vaschette si considera una nuova pioggia
+	RAINSENSORQTY_SECSBETWEENRAINEVENT=10800 # =3h, significa che dopo 3 si resetta il numero di vaschette da riempire e solo dopo il riempimento del nuovo numero di vaschette si considera una nuova pioggia
-infine la variabile seguente è la quantita' di acqua espressa in mm di precipitazioni:
+infine la variabile seguente e' la quantita' di acqua espressa in mm di precipitazioni:
 	RAINSENSORQTY_MMEACH=0.33 # see RAINSENSORQTY driver readme for details
 
 CALIBRAZIONE SENSORE PIOGGIA
@@ -27,15 +27,15 @@ CALIBRAZIONE SENSORE PIOGGIA
 secondo il seguente processo da me effettuato sul mio misuratore di pioggia:
 Ho erogato 18 ml di acqua nel rain gauge che hanno prodotto 10 impulsi; pertanto il riempimento di 1.8 ml ha causato un impulso, 1 ml = 1000 mmc (mm cubici),
 1.8 ml sono pari a 1800 mmc
-la superficie della vaschetta in mmq è pari a 110 mm x 55 mm = 5500 mmq
+la superficie della vaschetta in mmq e' pari a 110 mm x 55 mm = 5500 mmq
 volume / superficie mi da' l'altezza, quindi 1800 mmc / 5500 mmq = 0.32727273 mm
-se fossero stati 1.7 ml di acqua per ogni impulso/vaschetta riempita, la varibile sarebbe stata impostata a 0.30909091 mm
+se fossero stati 1.7 ml di acqua per ogni impulso/vaschetta riempita, la variabile sarebbe stata impostata a 0.30909091 mm
 
 COMANDI SPECIALI
 ----------------
-nella sottidirectory command sono prensenti:
+nella sottodirectory command sono presenti:
 commands/rainsensorqty_CHECK.sh
-	chiama la funzione di verifica piggio, la medesima chiamata da check_rain_sensor
+	chiama la funzione di verifica pioggia, la medesima chiamata da check_rain_sensor
 commands/rainsensorqty_HISTORY.sh
 	visualizza lo storico della pioggia
 commands/rainsensorqty_INIT.sh
@@ -44,14 +44,19 @@ commands/rainsensorqty_INIT.sh
 commands/rainsensorqty_KILL.sh
 	killa i processi di monitoring ed eventuali figli
 commands/rainsensorqty_RAINNOW.sh
-	simula una pioggia
+	simula una pioggia registrandola in $RAINSENSORQTY_LASTRAIN
+commands/rainsensorqty_REMOVELASTRAIN.sh
+	rimuove dai file $RAINSENSORQTY_LASTRAIN $RAINSENSORQTY_HISTORY l'ultima pioggia registrata
+commands/rainsensorqty_RESET.sh
+	invia il SIGUSR1 al processo di monitor per resettare i cicli. Viene visualizzato il reset solo dopo il successivo PULSE, questo perche' non e' possibile per lo script ricevere il trap in quanto il processo $GPIO e' attivo in attesa del PULSE
+
 
 ULTERIORI VARIABILI in config.include.sh
 ----------------------------------------
 esistono ulteriori variabili che potrebbe essere necessario variare
 
-RAINSENSOR_ANTIBOUNCE=0.3 # 0.3 seconds for manage antibounce of reed contact
+RAINSENSOR_DEBOUNCE=0.3 # 0.3 seconds for manage debounce of reed contact
-	server per ritardare la lettura di un secondo impulso falso causato dal rimbalzo del contatto magnetico
+	serve per ritardare la lettura di un secondo impulso falso causato dal rimbalzo del contatto magnetico
 
 RAINSENSORQTY_verbose="yes"
 	aumenta il livello di verbosita' nei file di log
@@ -59,40 +64,42 @@ RAINSENSORQTY_verbose="yes"
 RAINSENSORQTY_LASTRAIN="$STATUS_DIR/rainsensorqty_lastrain"
 	memorizza l'ultima pioggia
 RAINSENSORQTY_HISTORY="$STATUS_DIR/rainsensorqty_history"
-	memorizza tutte le piogge permettendo di visualizzarlo storico (commands/rainsensorqty_HISTORY.sh)
+	memorizza tutte le piogge permettendo di visualizzare lo storico (commands/rainsensorqty_HISTORY.sh)
 
 RAINSENSORQTY_MONITORLOG="$DIR_SCRIPT/log/rainsensorqty_monitor.log"
-	log del script di monitoring, popolato solo se RAINSENSORQTY_verbose="yes"
+	log dello script di monitoring, popolato solo se RAINSENSORQTY_verbose="yes"
 
 RAINSENSORQTY_MONPID="$TMP_PATH/rainsensorqty_monitor.pid"
 	file che viene popolato con il pid dello script di monitoring
+RAINSENSORQTY_STATE="$TMP_PATH/rainsensorqty_state"
+	file che viene popolato con l'ultimo stato della vaschetta (formato timestamp:counter)
 
 RAINSENSORQTY_DIR="$DIR_SCRIPT/drv/rainsensorqty"
 	home directory del driver
 
 monitor_sh="$RAINSENSORQTY_DIR/drv_rainsensorqty_monitor.sh"
 	script di monitoring
-	lo script eredita le varibili di ambiente da .set_var in $RAINSENSORQTY_DIR
+	lo script eredita le variabili di ambiente da $RAINSENSORQTY_VAR ($TMP_PATH/.rainsensorqty_var)
+
+# internal gpio resistor, 3 values: pull-up, pull-down, none
+# pull-up/down if rain gauge is connected directly to raspberry
+# none if connected through an optocoupler circuit
+GPIO_RESISTOR="none" #pull-up|pull-down|none
+	enable pull-up or pull-down resistor: https://raspberry-projects.com/pi/pi-hardware/raspberry-pi-model-b-plus/model-b-plus-io-pins
+	Pull-up is 50K min - 65K max.
+	Pull-down is 50K min - 60K max. 
 
 #rising means waiting for 1 status (from 0)
 #falling means waiting for 0 status (from 1)
 #RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
 #RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
-if (( RAIN_GPIO_STATE = 1 )) ; then
+(( RAIN_GPIO_STATE == 1 )) && RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
-        RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+(( RAIN_GPIO_STATE == 0 )) && RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
-fi
-if (( RAIN_GPIO_STATE = 0 )) ; then
-        RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
-fi
-if [[ -z $RAINSENSORQTY_PULSE ]] ; then
-         echo "ERROR: RAIN_GPIO_STATE non set in piGarden.conf"
-         exit 1
-fi
 
 	lo script di monitoring ascolta il cambiamento di stato da quello di riposo allo stato di impulso (chiusura del contatto reed).
 	dipendentemente dal circuto implementato, se lo stato di riposo e' 0, lo script attende la variazione verso 1 (rising)
 	se lo stato di riposo e' 1, lo script attende la variazione verso 0 (falling)
 	la variabile RAINSENSORQTY_PULSE viene impostata secondo il valore di RAIN_GPIO_STATE presente in /etc/piGarden.conf
-	cioe' il valore che ci si aspetta per registrare lo stato di pioggia
+	cioe' il valore che ci si aspetta per registrare il riempimento della vaschetta dello stato di pioggia
 
 

drv/rainsensorqty/commands/rainsensorqty_CHECK.sh

@@ -2,7 +2,7 @@
 #
 # Driver rainsensorqty - driver for measure the rain volume
 # Author: androtto
-# file "test_rainsensorqty_CHECK.sh"
+# file "rainsensorqty_CHECK.sh"
 # test script for checking rain status using drv_rainsensorqty_rain_sensor_get function
 # Version: 0.2.0
 # Data: 11/Aug/2019

drv/rainsensorqty/commands/rainsensorqty_HISTORY.sh

@@ -2,10 +2,10 @@
 #
 # Driver rainsensorqty - driver for measure the rain volume
 # Author: androtto
-# file "test_rainsensorqty_CHECK.sh"
+# file "rainsensorqty_CHECK.sh"
 # test script for checking rain status using drv_rainsensorqty_rain_sensor_get function
-# Version: 0.2.0
+# Version: 0.2.0a
-# Data: 11/Aug/2019
+# Data: 13/Aug/2019
 
 SCRIPTDIR="$(cd `dirname $0` ; pwd )"
 SCRIPTNAME=${0##*/}
@@ -27,14 +27,7 @@ LOG_OUTPUT_DRV_FILE="$DIR_SCRIPT/log/$LOG_OUTPUT_DRV_FILE"
 . ./init.include.sh
 . ./rainsensor.include.sh
 
+rain_history # update rain history file if not
+
 echo "RAIN HISTORY"
-rain_history
+cat $RAINSENSORQTY_HISTORY | rain_when_amount
-
-cat $RAINSENSORQTY_HISTORY | while read line
-do
-	set -- ${line//:/ }
-	when=$1
-	howmuch=$2
-	printf "RAINED on %s for %.2f mm\n" "$(date --date="@$1")" $( $JQ -n "$howmuch * $RAINSENSORQTY_MMEACH" )
-done
-

drv/rainsensorqty/commands/rainsensorqty_INIT.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # Driver rainsensorqty - driver for measure the rain volume
 # Author: androtto
-# file "test_rainsensorqty_INIT.sh"
+# file "rainsensorqty_INIT.sh"
 # test script for initialize driver and executing monitor process
 # Version: 0.2.0
 # Data: 11/Aug/2019

drv/rainsensorqty/commands/rainsensorqty_KILL.sh

@@ -1,4 +1,11 @@
 #!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_KILL.sh"
+# script for killing monitor process(es)
+# Version: 0.2.0a
+# Data: 29/Aug/2019
+
 
 SCRIPTDIR="$(cd `dirname $0` ; pwd )"
 SCRIPTNAME=${0##*/}
@@ -43,6 +50,7 @@ if [[ -f "$RAINSENSORQTY_MONPID" ]] ; then
 	else
 		echo "no RAIN process alive"
         fi
-
+else
+	echo "no RAIN process alive"
 fi
 

drv/rainsensorqty/commands/rainsensorqty_RAINNOW.sh

@@ -1,10 +1,10 @@
 #!/bin/bash
 # Driver rainsensorqty - driver for measure the rain volume
 # Author: androtto
-# file "test_rainsensorqty_RAINNOW.sh"
+# file "rainsensorqty_RAINNOW.sh"
 # test script for simulate rain ... now!
-# Version: 0.2.0
+# Version: 0.2.0a
-# Data: 11/Aug/2019
+# Data: 13/Aug/2019
 
 SCRIPTDIR="$(cd `dirname $0` ; pwd )"
 SCRIPTNAME=${0##*/}
@@ -24,4 +24,8 @@ fi
 . ./init.include.sh
 . ./rainsensor.include.sh
 
+echo "RAIN now!"
 echo "$(date +%s):$RAINSENSORQTY_LOOPSFORSETRAINING" > ${RAINSENSORQTY_LASTRAIN}
+echo "file ${RAINSENSORQTY_LASTRAIN} updated."
+echo -e "\nLAST RAIN:"
+cat $RAINSENSORQTY_LASTRAIN | rain_when_amount

drv/rainsensorqty/commands/rainsensorqty_REMOVELASTRAIN.sh

@@ -0,0 +1,55 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "test_rainsensorqty_CHECK.sh"
+# test script for checking rain status using drv_rainsensorqty_rain_sensor_get function
+# Version: 0.2.0a
+# Data: 13/Aug/2019
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+TMP_PATH="/run/shm"
+if [ ! -d "$TMP_PATH" ]; then
+        TMP_PATH="/tmp"
+fi
+
+LOG_OUTPUT_DRV_FILE="$DIR_SCRIPT/log/$LOG_OUTPUT_DRV_FILE"
+
+. $CONFIG_ETC
+
+. ./common.include.sh
+. ./config.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+# two variables for store rain data
+# RAINSENSORQTY_LASTRAIN
+# RAINSENSORQTY_HISTORY
+
+rain_history # update rain history file if not
+
+echo "RAIN HISTORY - last five events"
+tail -5 $RAINSENSORQTY_HISTORY | rain_when_amount
+
+echo -e "\nLAST RAIN"
+cat $RAINSENSORQTY_LASTRAIN | rain_when_amount
+
+#exit # for test
+
+echo -e "\nbackup to .old files"
+cp -p $RAINSENSORQTY_HISTORY ${RAINSENSORQTY_HISTORY}.old
+cp -p  $RAINSENSORQTY_LASTRAIN ${RAINSENSORQTY_LASTRAIN}.old
+
+echo "...removing last event"
+head -n-1 ${RAINSENSORQTY_HISTORY}.old > $RAINSENSORQTY_HISTORY 
+tail -1 $RAINSENSORQTY_HISTORY > $RAINSENSORQTY_LASTRAIN 
+
+echo -e "\nnew RAIN HISTORY - last five events"
+tail -5 $RAINSENSORQTY_HISTORY | rain_when_amount
+
+echo -e "\nnew LAST RAIN"
+cat $RAINSENSORQTY_LASTRAIN | rain_when_amount

drv/rainsensorqty/commands/rainsensorqty_RESET.sh

@@ -0,0 +1,39 @@
+#!/bin/bash
+# Driver rainsensorqty - driver for measure the rain volume
+# Author: androtto
+# file "rainsensorqty_RESET.sh"
+# script for reset counter in monitor script
+# Version: 0.2.0a
+# Data: 29/Aug/2019
+
+SCRIPTDIR="$(cd `dirname $0` ; pwd )"
+SCRIPTNAME=${0##*/}
+cd $SCRIPTDIR/.. # command is a subdirectory of driver
+
+DIR_SCRIPT=/home/pi/piGarden # home directory of piGarden
+CONFIG_ETC="/etc/piGarden.conf"
+TMP_PATH="/run/shm"
+if [ ! -d "$TMP_PATH" ]; then
+        TMP_PATH="/tmp"
+fi
+
+. $CONFIG_ETC
+
+. ./config.include.sh
+. ./common.include.sh
+. ./init.include.sh
+. ./rainsensor.include.sh
+
+# check if rain monitor process is running...
+if [[ -f "$RAINSENSORQTY_MONPID" ]] ; then
+        pid="$( < "$RAINSENSORQTY_MONPID" )"
+        if ps -fp $pid >/dev/null ; then
+		echo "sending SIGUSR1 to $pid"
+		kill -SIGUSR1 $pid
+		echo -e "sent SIGUSR1 - reset will be shown after next cycle"
+	else
+		echo "no RAIN process alive"
+        fi
+else
+	echo "no RAIN process alive"
+fi

drv/rainsensorqty/common.include.sh

@@ -3,8 +3,8 @@
 # Author: androtto
 # file "common.include.sh"
 # common functions used by driver
-# Version: 0.2.0
+# Version: 0.2.0a
-# Data: 11/Aug/2019
+# Data: 13/Aug/2019
 
 
 #note:
@@ -67,3 +67,16 @@ rain_history()
 		return 0
 	fi
 }
+
+rain_when_amount()
+{
+# from standard input
+cat - | while read line
+do
+        set -- ${line//:/ }
+        when=$1
+        howmuch=$2
+        printf "RAINED on %s for %.2f mm\n" "$(date --date="@$1")" $( $JQ -n "$howmuch * $RAINSENSORQTY_MMEACH" )
+done
+}
+

drv/rainsensorqty/config.include.sh

@@ -6,9 +6,9 @@
 # Version: 0.2.0
 # Data: 11/Aug/2019
 
-RAINSENSOR_ANTIBOUNCE=0.3 # 0.3 seconds for manage antibounce of reed contact
+RAINSENSOR_DEBOUNCE=0.3 # 0.3 seconds for manage debounce of reed contact
 
-RAINSENSORQTY_verbose="no" # yes/no
+RAINSENSORQTY_verbose="yes" # yes/no
 
 RAINSENSORQTY_LASTRAIN="$STATUS_DIR/rainsensorqty_lastrain"
 RAINSENSORQTY_HISTORY="$STATUS_DIR/rainsensorqty_history"
@@ -16,24 +16,46 @@ RAINSENSORQTY_HISTORY="$STATUS_DIR/rainsensorqty_history"
 RAINSENSORQTY_MONITORLOG="$DIR_SCRIPT/log/rainsensorqty_monitor.log"
 
 RAINSENSORQTY_MONPID="$TMP_PATH/rainsensorqty_monitor.pid"
+RAINSENSORQTY_STATE="$TMP_PATH/rainsensorqty_state"
+RAINSENSORQTY_STATE_HIST="$TMP_PATH/rainsensorqty_state.history"
 
 RAINSENSORQTY_DIR="$DIR_SCRIPT/drv/rainsensorqty"
 
 monitor_sh="$RAINSENSORQTY_DIR/drv_rainsensorqty_monitor.sh"
 
+# internal gpio resistor, 3 values: pull-up, pull-down, none
+# pull-up/down if rain gauge is connected directly to raspberry
+# none if connected through an optocoupler circuit
+GPIO_RESISTOR="pull-up" #pull-up|pull-down|none
 
 #rising means waiting for 1 status (from 0)
 #falling means waiting for 0 status (from 1)
 #RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
 #RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
-if (( RAIN_GPIO_STATE = 1 )) ; then
+(( RAIN_GPIO_STATE == 1 )) && RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
-	RAINSENSORQTY_PULSE=rising  # pull-down circuit (rest status is 0)
+(( RAIN_GPIO_STATE == 0 )) && RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
-fi
+
-if (( RAIN_GPIO_STATE = 0 )) ; then
+
-	RAINSENSORQTY_PULSE=falling # pull-up circuit   (rest status is 1)
+config_check()
-fi
+{
-if [[ -z $RAINSENSORQTY_PULSE ]] ; then
+	var2check="RAINSENSOR_DEBOUNCE RAINSENSORQTY_verbose RAINSENSORQTY_LASTRAIN RAINSENSORQTY_HISTORY RAINSENSORQTY_MONITORLOG RAINSENSORQTY_MONPID RAINSENSORQTY_DIR monitor_sh"
-	 echo "ERROR: RAIN_GPIO_STATE non set in piGarden.conf"
+	for var in $var2check
-	 exit 1
+	do
-fi
+		if [[ -z $var ]] ; then
+			echo "ERROR: $var not set"
+			exit 1 
+		fi
+	done
+	if [[ -z $RAINSENSORQTY_PULSE ]] ; then
+		echo "ERROR: RAIN_GPIO_STATE not set in piGarden.conf"
+		exit 1
+	fi
+	return 0
+	case $GPIO_RESISTOR in
+		pull-up|pull-down|none) return 0 ;;
+		*) echo "ERROR: GPIO_RESISTOR not set correctly - values are \"pull-up|pull-down|none\" "
+			exit 1
+			;;
+	esac
+}
 

drv/rainsensorqty/drv_rainsensorqty_monitor.sh

@@ -4,23 +4,37 @@
 # Author: androtto
 # file "drv_rainsensorqty_monitor.sh"
 # monitor script
-# Version: 0.2.0
+# Version: 0.2.1
-# Data: 11/Aug/2019
+# Data: 29/Aug/2019
+
+resetcounter()
+{
+        (( counter = 0 ))
+        drv_rainsensorqty_writelog $f "SIGUSR1 received after last PULSE - counter resetted" & 
+        echo "SIGUSR1 received after last PULSE - counter resetted"
+}
 
 ###############
 #    MAIN     #
 ###############
 
+trap "resetcounter" SIGUSR1
+
 DIRNAME="$( dirname $0 )"
 f="$(basename $0)"
 . $DIRNAME/common.include.sh
-set_var="$DIRNAME/.set_var"
+TMP_PATH="/run/shm"
+if [ ! -d "$TMP_PATH" ]; then
+        TMP_PATH="/tmp"
+fi
 
-if [[ -f "$set_var" ]] ; then
+RAINSENSORQTY_VAR=$TMP_PATH/.rainsensorqty_var
-	en_echo "NORMAL: file $set_var found - getting variables"
+
-	. "$set_var"
+if [[ -f "$RAINSENSORQTY_VAR" ]] ; then
+	en_echo "NORMAL: file $RAINSENSORQTY_VAR found - getting variables"
+	. "$RAINSENSORQTY_VAR"
 else
-	echo "ERROR: $set_var not found"
+	echo "ERROR: $RAINSENSORQTY_VAR not found"
 	exit 1
 fi
 
@@ -52,23 +66,26 @@ en_echo "---- NEW RUN "
 while true
 do
 	before=`date +%s`
-	sleep $RAINSENSOR_ANTIBOUNCE
+	sleep $RAINSENSOR_DEBOUNCE
-	en_echo "WAITING FOR PULSE" 
+	en_echo "WAITING FOR $RAINSENSORQTY_PULSE PULSE" 
 	$GPIO -g wfi $gpio_port $RAINSENSORQTY_PULSE
 	now=`date +%s`
 	(( elapsed = now - before ))
 	if (( elapsed >= RAINSENSORQTY_SECSBETWEENRAINEVENT )) ; then
 		(( counter=0 ))
-		drv_rainsensorqty_writelog $f "first drops after $elapsed seconds since last rain ( greater than $RAINSENSORQTY_SECSBETWEENRAINEVENT )- new cycle - waiting for $( $JQ -n "$RAINSENSORQTY_LOOPSFORSETRAINING * $MMEACH" )" &
+		drv_rainsensorqty_writelog $f "first drops after $elapsed seconds since last rain ( greater than $RAINSENSORQTY_SECSBETWEENRAINEVENT )- new cycle - waiting for $( $JQ -n "$RAINSENSORQTY_LOOPSFORSETRAINING * $MMEACH" ) mm of rain" &
+		echo "NEW CYCLE"
 		rain_history
 	fi
   	(( counter+=1 ))
-	en_echo "PULSE RECEIVED (counter $counter)" 
+	en_echo "$RAINSENSORQTY_PULSE PULSE #$counter RECEIVED" 
+	echo "$now:$counter" > ${RAINSENSORQTY_STATE} &
+	echo "$now:$counter" >> ${RAINSENSORQTY_STATE_HIST} &
 	MMWATER=$( $JQ -n "$counter*$MMEACH" )
-	text=$(printf "%.2f mm height (loop %d)" $MMWATER $counter )
+	text=$(printf "%.2f mm height (#%d pulse)" $MMWATER $counter )
 	if (( counter >= RAINSENSORQTY_LOOPSFORSETRAINING )) ; then 
 		drv_rainsensorqty_writelog $f "RAINING - $text" &
-		echo "$(date +%s):$counter" > ${RAINSENSORQTY_LASTRAIN} 
+		echo "$now:$counter" > ${RAINSENSORQTY_LASTRAIN} 
 	else
 		drv_rainsensorqty_writelog $f "now is $text" &
 	fi

drv/rainsensorqty/init.include.sh

@@ -23,4 +23,11 @@ function drv_rainsensorqty_init {
 	fi
 }
 
-set | $GREP -e ^GPIO -e ^LOG -e ^CUT -e ^JQ -e ^RAIN -e ^SCR -e ^TMP > "${RAINSENSORQTY_DIR}/.set_var"
+if ! config_check ; then
+	echo "ERROR" 
+	exit 1
+fi
+
+RAINSENSORQTY_VAR=$TMP_PATH/.rainsensorqty_var
+
+set | $GREP -e ^GPIO -e ^LOG -e ^CUT -e ^JQ -e ^RAIN -e ^SCR -e ^TMP > $RAINSENSORQTY_VAR

drv/rainsensorqty/rainsensor.include.sh

@@ -14,14 +14,41 @@
 #
 drv_rainsensorqty_rain_sensor_init()
 {
-	drv_rainsensorqty_writelog "drv_rainsensorqty_rain_sensor_init" $1 
+	local f=drv_rainsensorqty_rain_sensor_init
+	drv_rainsensorqty_writelog "launched: $f" $1 
 
 	local drvt="$( echo $RAIN_GPIO | $CUT -f 1 -d: )"
 	local drv="$( echo $RAIN_GPIO | $CUT -f 2 -d: )"
 	local gpio_port="$( echo $RAIN_GPIO | $CUT -f 3 -d: )"
 
-	$GPIO -g mode $gpio_port in
+	if $GPIO -g mode $gpio_port in ; then
+		drv_rainsensorqty_writelog $f "NORMAL: '$GPIO -g mode $gpio_port in' set correctly"
+	else
+		drv_rainsensorqty_writelog $f "ERROR: '$GPIO -g mode $gpio_port in' has an error"
+		exit 1
+	fi
 
+	case $GPIO_RESISTOR in 
+		pull-up)   gpio_arg=up 
+			   message="NORMAL: '$GPIO -g mode $gpio_port up' set internal pull-up resistor"
+			;;
+		pull-down) gpio_arg=down
+			   message="NORMAL: '$GPIO -g mode $gpio_port down' set internal pull-down resistor"
+			;;
+		none)      gpio_arg=tri
+			   message="NORMAL: '$GPIO -g mode $gpio_port tri' set none to internal resistor"
+			;;
+		*) echo "ERROR: GPIO_RESISTOR not set correctly - values are \"pull-up|pull-down|none\" "
+			drv_rainsensorqty_writelog "drv_rainsensorqty_rain_sensor_init" "ERROR: GPIO_RESISTOR not set correctly - values are \"pull-up|pull-down|none\" "
+			exit 1
+			;;
+	esac
+	if $GPIO -g mode $gpio_port $gpio_arg ; then
+		drv_rainsensorqty_writelog $f "$message"
+	else
+		drv_rainsensorqty_writelog $f "ERROR: '$GPIO -g mode $gpio_port $gpio_arg' command"
+		exit 1
+	fi
 }
 
 #